[Sun May 27 04:03:10 2012] Detection parameters:
  Position = (182.6, 200.1) = 18 34 37.27 -65 40 50.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 56.1 +/- 9.4
  Background counts = 4.3
  Rate = 0.004 +/- 0.0007

[Sun May 27 04:03:10 2012] Off-axis axis estimate = 11.01'
[Sun May 27 05:13:28 2012] Using EEF radius (= 11.94 ")to estimate initial spatial extent for simple fitting
[Sun May 27 05:13:28 2012] Initial guess for spatial extent in simple fitting = 11.94"
[Sun May 27 05:13:28 2012] source mask rpix=2.7, npix_max = 42, mask sum = 42, frac = 0.998
[Sun May 27 05:13:28 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 11.94"
[Sun May 27 06:01:51 2012] fullrun_mos1_xmm0679181501_pi300-10000_cl_pass0_src13.ximg exists
[Sun May 27 06:01:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679181501_pi300-10000_cl_pass0_src13.csv
[Sun May 27 06:01:51 2012] fullrun_mos1_xmm0679181501_pi300-10000_cl_pass0_src13_1.ximg exists
[Sun May 27 06:01:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679181501_pi300-10000_cl_pass0_src13.csv
[Sun May 27 06:01:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0679181501_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0679181501_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 06:01:52 2012] fullrun_mos1_xmm0679181501_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Sun May 27 06:01:52 2012] fullrun_mos1_xmm0679181501_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Sun May 27 06:01:52 2012] Fit fullrun_mos1_xmm0679181501_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Sun May 27 06:44:20 2012] Spatial fit model total counts = 83.849500, observed total counts = 85.000000
[Sun May 27 06:44:20 2012] Offset between fit and detection position for source 3 = 0.137800 pixels
[Sun May 27 06:44:20 2012] 85.551400 total counts/ 50.837200 bgd. counts: snr = 4.868737
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.137800 pixels
  Position = (182.8, 200.2) = 18 34 37.19 -65 40 50.3
  Extent = 5.1 (3.6-7.0)", rotation angle = 0
  Source counts = 34.7 +/- 9.2
  Background counts = 50.8
  Rate = 0.002 +/- 0.0007
[Sun May 27 06:44:20 2012] Vigneting correction estimate = 1.000000
[Sun May 27 06:44:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 06:44:20 2012] Assessing source extent using major axis lower bound
[Sun May 27 06:44:20 2012] Source does appear to be extended
[Sun May 27 06:44:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 07:44:03 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 27 07:44:03 2012] Initial guess for spatial extent in simple fitting = 5.06"
[Sun May 27 07:44:03 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.813
[Sun May 27 07:44:03 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 5.06"
[Sun May 27 08:23:28 2012] fullrun_mos1_xmm0679181501_pi300-10000_cl_pass1_src12.ximg exists
[Sun May 27 08:23:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679181501_pi300-10000_cl_pass1_src12.csv
[Sun May 27 08:23:28 2012] fullrun_mos1_xmm0679181501_pi300-10000_cl_pass1_src12_1.ximg exists
[Sun May 27 08:23:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679181501_pi300-10000_cl_pass1_src12.csv
[Sun May 27 08:23:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0679181501_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0679181501_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 08:23:28 2012] fullrun_mos1_xmm0679181501_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Sun May 27 08:23:28 2012] fullrun_mos1_xmm0679181501_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Sun May 27 08:23:28 2012] Fit fullrun_mos1_xmm0679181501_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Sun May 27 09:06:20 2012] Spatial fit model total counts = 80.848400, observed total counts = 82.000000
[Sun May 27 09:06:20 2012] Offset between fit and detection position for source 3 = 0.026958 pixels
[Sun May 27 09:06:20 2012] 82.478900 total counts/ 47.980400 bgd. counts: snr = 4.980447
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.026958 pixels
  Position = (182.7, 200.2) = 18 34 37.20 -65 40 50.2
  Extent = 5.1 (1.7-7.9)", rotation angle = 0
  Source counts = 34.5 +/- 9.1
  Background counts = 48.0
  Rate = 0.002 +/- 0.0007
[Sun May 27 09:06:20 2012] Vigneting correction estimate = 1.000000
[Sun May 27 09:06:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 09:06:20 2012] Assessing source extent using major axis lower bound
[Sun May 27 09:06:20 2012] Source does appear to be extended
[Sun May 27 09:06:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 09:56:14 2012] XMMSAS src. selection expression = ellipse(15849.859200, 17368.479200, 303.096609, 303.096609, 0.000000, X, Y)
[Sun May 27 09:56:14 2012] Writing source region out to fullrun_mos1_xmm0679181501_pi300-10000_pass1_cl_src3_src.reg
[Sun May 27 09:56:14 2012] Extracting stamp from image fullrun_mos1_xmm0679181501_pi300-10000_cl_sm2.00.img.gz, (165, 183) - (200, 218)
[Sun May 27 09:56:14 2012] XMMSAS bgd. selection expression = annulus(15849.859200, 17368.479200, 505.161015, 1010.322029, X, Y)
[Sun May 27 09:56:14 2012] Writing fullrun_mos1_xmm0679181501_pi300-10000_pass1_cl_src3.gif
[Sun May 27 10:00:27 2012] Mean detx,y = (-11022.68, -10425.56) 
[Sun May 27 10:00:28 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 27 10:00:35 2012] Binned source spectrum to 10 counts/bin
[Sun May 27 10:00:35 2012] Setting source spectrum file to fullrun_mos1_xmm0679181501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun May 27 10:00:35 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0679181501_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun May 27 10:18:25 2012] Not generating rmf since there are only 34 counts
[Sun May 27 10:18:25 2012] rmf not generated due to insufficient counts
[Sun May 27 10:55:57 2012] Updating aperture counts using extracted products
[Sun May 27 10:55:57 2012] Error reading totcts from fullrun_mos1_xmm0679181501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun May 27 10:55:58 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 27 10:55:58 2012] Using photon index=1.80, rate=0.00248, arf fullrun_mos1_xmm0679181501_pi300-10000_pass1_cl_src3.arf
[Sun May 27 10:55:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 27 10:55:58 2012] Updating source flux to 8.4e-14
[Sun May 27 10:56:02 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting