[Sun May 27 04:03:10 2012] Detection parameters: Position = (328.4, 317.2) = 18 32 54.72 -65 32 21.6 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 30.4 +/- 8.6 Background counts = 9.7 Rate = 0.002 +/- 0.0006 [Sun May 27 04:03:10 2012] Off-axis axis estimate = 2.57' [Sun May 27 05:13:28 2012] Using EEF radius (= 7.71 ")to estimate initial spatial extent for simple fitting [Sun May 27 05:13:28 2012] Initial guess for spatial extent in simple fitting = 7.71" [Sun May 27 05:13:28 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.968 [Sun May 27 05:13:28 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 7.71" [Sun May 27 06:01:52 2012] fullrun_mos1_xmm0679181501_pi300-10000_cl_pass0_src28.ximg exists [Sun May 27 06:01:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679181501_pi300-10000_cl_pass0_src28.csv [Sun May 27 06:01:52 2012] fullrun_mos1_xmm0679181501_pi300-10000_cl_pass0_src28_1.ximg exists [Sun May 27 06:01:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679181501_pi300-10000_cl_pass0_src28.csv [Sun May 27 06:01:52 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0679181501_pi300-10000_cl_pass0_src28_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0679181501_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 27 06:01:52 2012] fullrun_mos1_xmm0679181501_pi300-10000_cl_pass0_tfrozen_src28.ximg exists [Sun May 27 06:01:52 2012] fullrun_mos1_xmm0679181501_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists [Sun May 27 06:01:52 2012] Fit fullrun_mos1_xmm0679181501_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly [Sun May 27 06:44:20 2012] Warning, spatial fit 28 centroid is now closest to src. 25 [Sun May 27 06:44:20 2012] Vigneting correction estimate = 1.000000 [Sun May 27 06:44:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 27 06:44:20 2012] Assessing source extent using major [Sun May 27 06:44:20 2012] Source does appear to be extended [Sun May 27 06:44:20 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 27 06:44:20 2012] Source is confused with source 25 [Sun May 27 07:44:03 2012] Using EEF radius (= 7.71 ")to estimate initial spatial extent for simple fitting [Sun May 27 07:44:03 2012] Initial guess for spatial extent in simple fitting = 7.71" [Sun May 27 07:44:03 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.968 [Sun May 27 07:44:03 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 7.71" [Sun May 27 08:23:28 2012] fullrun_mos1_xmm0679181501_pi300-10000_cl_pass1_src25.ximg exists [Sun May 27 08:23:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679181501_pi300-10000_cl_pass1_src25.csv [Sun May 27 08:23:28 2012] fullrun_mos1_xmm0679181501_pi300-10000_cl_pass1_src25_1.ximg exists [Sun May 27 08:23:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679181501_pi300-10000_cl_pass1_src25.csv [Sun May 27 08:23:28 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0679181501_pi300-10000_cl_pass1_src25_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0679181501_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 27 08:23:28 2012] fullrun_mos1_xmm0679181501_pi300-10000_cl_pass1_tfrozen_src25.ximg exists [Sun May 27 08:23:28 2012] fullrun_mos1_xmm0679181501_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists [Sun May 27 08:23:28 2012] Fit fullrun_mos1_xmm0679181501_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly [Sun May 27 09:06:20 2012] Source 23 is offset by -2.526244 and 3.246125 pixels which is larger than 2 X fitted extent = 1.119724 x 1.119724, not incorporating fit results [Sun May 27 09:06:20 2012] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 20.690896 pixels away [Sun May 27 09:06:20 2012] Spatial fit model total counts = 1209.860000, observed total counts = 1200.000000 [Sun May 27 09:06:20 2012] Offset between fit and detection position for source 23 = 8.030226 pixels [Sun May 27 09:06:20 2012] Warning, changing simple spatial fit ID from 25 to 10 [Sun May 27 09:06:20 2012] 1090.371000 total counts/ 875.652000 bgd. counts: snr = 7.256124 Spatial fit parameters: Offset between fit and detection position for source 23 = 8.030226 pixels Position = (327.0, 325.1) = 18 32 55.74 -65 31 48.1 Extent = 28.5 (24.4-57.0)", rotation angle = 0 Source counts = 214.7 +/- 33.0 Background counts = 875.7 Rate = 0.02 +/- 0.002 [Sun May 27 09:06:20 2012] Vigneting correction estimate = 1.000000 [Sun May 27 09:06:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 27 09:06:20 2012] Assessing source extent using major axis lower bound [Sun May 27 09:06:20 2012] Source does appear to be extended [Sun May 27 09:06:20 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 27 09:56:15 2012] XMMSAS src. selection expression = ellipse(28398.988000, 28235.404000, 1709.856049, 1709.856049, 0.000000, X, Y) [Sun May 27 09:56:15 2012] Writing source region out to fullrun_mos1_xmm0679181501_pi300-10000_pass1_cl_src23_src.reg [Sun May 27 09:56:15 2012] Extracting stamp from image fullrun_mos1_xmm0679181501_pi300-10000_cl_sm2.00.img.gz, (229, 227) - (425, 423) [Sun May 27 09:56:15 2012] XMMSAS bgd. selection expression = annulus(28398.988000, 28235.404000, 2849.760082, 5699.520164, X, Y) && !ellipse(27967.260000, 26420.026000, 779.328022, 779.328022, 0.000000, X, Y) && !ellipse(27812.172000, 24386.979200, 440.870413, 440.870413, 0.000000, X, Y) && !ellipse(23211.902400, 28649.437300, 369.997611, 369.997611, 0.000000, X, Y) && !ellipse(23806.246000, 34705.444000, 2159.680062, 2159.680062, 0.000000, X, Y) && !ellipse(29846.709600, 27986.367200, 366.800811, 366.800811, 0.000000, X, Y) && !ellipse(27984.274000, 27000.606000, 1233.784036, 1233.784036, 0.000000, X, Y) && !ellipse(24125.954000, 34911.896000, 1661.600048, 1661.600048, 0.000000, X, Y) && !ellipse(23322.897200, 34693.755400, 954.928027, 954.928027, 152.152572, X, Y) && !ellipse(28727.121704, 26316.994965, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23811.619049, 33940.492096, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27120.021851, 27519.672791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25571.432200, 30835.330200, 427.080012, 427.080012, 0.000000, X, Y) && !ellipse(26500.831848, 26237.352051, 870.000000, 870.000000, 0.000000, X, Y) [Sun May 27 09:56:15 2012] Writing fullrun_mos1_xmm0679181501_pi300-10000_pass1_cl_src23.gif [Sun May 27 10:03:36 2012] Mean detx,y = (584.43, 811.43) [Sun May 27 10:03:37 2012] Setting backscal keywords in source and bgd. spectrum [Sun May 27 10:04:27 2012] Binned source spectrum to 10 counts/bin [Sun May 27 10:04:27 2012] Setting source spectrum file to fullrun_mos1_xmm0679181501_pi300-10000_pass1_cl_src23_src_b10.pi.gz [Sun May 27 10:04:27 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0679181501_pi300-10000_pass1_cl_src23_bgd.pi.gz [Sun May 27 10:55:58 2012] Updating aperture counts using extracted products [Sun May 27 10:55:58 2012] Error reading totcts from fullrun_mos1_xmm0679181501_pi300-10000_pass1_cl_src23_src_b10.pi.gz [Sun May 27 10:55:59 2012] Calculating source flux in energy range 0.30-8.00 [Sun May 27 10:55:59 2012] Using photon index=1.80, rate=0.0154, arf fullrun_mos1_xmm0679181501_pi300-10000_pass1_cl_src23.arf [Sun May 27 10:55:59 2012] Assuming count rate is from the 0.30-10.00 bandpass [Sun May 27 10:55:59 2012] Updating source flux to 1.4e-13 [Sun May 27 10:56:02 2012] Flag b found in src. 23 procflags, skipping spectral fitting [Sun May 27 10:56:02 2012] Flag c found in src. 23 procflags, skipping spectral fitting