[Sun May 27 04:03:10 2012] Detection parameters:
  Position = (464.1, 377.1) = 18 31 20.04 -65 27 58.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 670.9 +/- 31.4
  Background counts = 5.4
  Rate = 0.05 +/- 0.002

[Sun May 27 04:03:10 2012] Off-axis axis estimate = 13.30'
[Sun May 27 05:13:28 2012] Using EEF radius (= 13.08 ")to estimate initial spatial extent for simple fitting
[Sun May 27 05:13:28 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 27 05:13:28 2012] Initial guess for spatial extent in simple fitting = 13.08"
[Sun May 27 05:13:28 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.997
[Sun May 27 05:13:28 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 13.08"
[Sun May 27 06:01:51 2012] fullrun_mos1_xmm0679181501_pi300-10000_cl_pass0_src1.ximg exists
[Sun May 27 06:01:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679181501_pi300-10000_cl_pass0_src1.csv
[Sun May 27 06:01:51 2012] fullrun_mos1_xmm0679181501_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun May 27 06:01:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679181501_pi300-10000_cl_pass0_src1.csv
[Sun May 27 06:01:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0679181501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0679181501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 06:01:52 2012] fullrun_mos1_xmm0679181501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun May 27 06:01:52 2012] fullrun_mos1_xmm0679181501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun May 27 06:01:52 2012] Fit fullrun_mos1_xmm0679181501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun May 27 06:44:20 2012] Spatial fit model total counts = 690.087000, observed total counts = 687.000000
[Sun May 27 06:44:20 2012] Offset between fit and detection position for source 2 = 0.294432 pixels
[Sun May 27 06:44:20 2012] 689.759000 total counts/ 212.626000 bgd. counts: snr = 32.721354
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.294432 pixels
  Position = (463.8, 377.1) = 18 31 20.24 -65 27 59.1
  Extent = 6.2 (5.8-6.7)", rotation angle = 0
  Source counts = 477.1 +/- 26.3
  Background counts = 212.6
  Rate = 0.03 +/- 0.002
[Sun May 27 06:44:20 2012] Vigneting correction estimate = 1.000000
[Sun May 27 06:44:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 06:44:20 2012] Assessing source extent using major axis lower bound
[Sun May 27 06:44:20 2012] Source does appear to be extended
[Sun May 27 06:44:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 07:44:03 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 27 07:44:03 2012] Initial guess for spatial extent in simple fitting = 6.22"
[Sun May 27 07:44:03 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.074
[Sun May 27 07:44:03 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.22"
[Sun May 27 08:23:27 2012] fullrun_mos1_xmm0679181501_pi300-10000_cl_pass1_src1.ximg exists
[Sun May 27 08:23:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679181501_pi300-10000_cl_pass1_src1.csv
[Sun May 27 08:23:27 2012] fullrun_mos1_xmm0679181501_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun May 27 08:23:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679181501_pi300-10000_cl_pass1_src1.csv
[Sun May 27 08:23:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0679181501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0679181501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 08:23:28 2012] fullrun_mos1_xmm0679181501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun May 27 08:23:28 2012] fullrun_mos1_xmm0679181501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun May 27 08:23:28 2012] Fit fullrun_mos1_xmm0679181501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun May 27 09:06:20 2012] Spatial fit model total counts = 598.881000, observed total counts = 600.000000
[Sun May 27 09:06:20 2012] Offset between fit and detection position for source 2 = 0.026454 pixels
[Sun May 27 09:06:20 2012] 598.318000 total counts/ 141.841000 bgd. counts: snr = 38.328163
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.026454 pixels
  Position = (463.8, 377.1) = 18 31 20.22 -65 27 59.1
  Extent = 5.9 (5.4-6.4)", rotation angle = 0
  Source counts = 456.5 +/- 24.5
  Background counts = 141.8
  Rate = 0.03 +/- 0.002
[Sun May 27 09:06:20 2012] Vigneting correction estimate = 1.000000
[Sun May 27 09:06:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 09:06:20 2012] Assessing source extent using major axis lower bound
[Sun May 27 09:06:20 2012] Source does appear to be extended
[Sun May 27 09:06:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 09:56:13 2012] XMMSAS src. selection expression = ellipse(40303.679620, 32761.901400, 353.464810, 353.464810, 0.000000, X, Y)
[Sun May 27 09:56:13 2012] Writing source region out to fullrun_mos1_xmm0679181501_pi300-10000_pass1_cl_src2_src.reg
[Sun May 27 09:56:13 2012] Extracting stamp from image fullrun_mos1_xmm0679181501_pi300-10000_cl_sm2.00.img.gz, (444, 357) - (484, 397)
[Sun May 27 09:56:13 2012] XMMSAS bgd. selection expression = annulus(40303.679620, 32761.901400, 589.108017, 1178.216034, X, Y)
[Sun May 27 09:56:13 2012] Writing fullrun_mos1_xmm0679181501_pi300-10000_pass1_cl_src2.gif
[Sun May 27 09:56:16 2012] Mean detx,y = (6978.66, 12178.90) 
[Sun May 27 09:56:17 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 27 09:56:25 2012] Binned source spectrum to 10 counts/bin
[Sun May 27 09:56:25 2012] Setting source spectrum file to fullrun_mos1_xmm0679181501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun May 27 09:56:25 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0679181501_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun May 27 10:55:56 2012] Updating aperture counts using extracted products
[Sun May 27 10:55:56 2012] Error reading totcts from fullrun_mos1_xmm0679181501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun May 27 10:55:58 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 27 10:55:58 2012] Using photon index=1.80, rate=0.0328, arf fullrun_mos1_xmm0679181501_pi300-10000_pass1_cl_src2.arf
[Sun May 27 10:55:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 27 10:55:58 2012] Updating source flux to 7.3e-13
[Sun May 27 10:56:35 2012] Reading fit data from xmm0679181501/analysis//spectral/fullrun_mos1_xmm0679181501_pi300-10000_pass1_cl_src2_pl.csv
[Sun May 27 10:56:35 2012] Spectral fit parameter nH value = 4.31458e+21
[Sun May 27 10:56:35 2012] Spectral fit parameter PhoIndex value = 4.78591
[Sun May 27 10:56:35 2012] Failed to get F(0.3-8.0) from xmm0679181501/analysis//spectral/fullrun_mos1_xmm0679181501_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sun May 27 10:56:35 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 27 10:56:35 2012] Using Nh = 4.3e+21, photon index=4.79, rate=0.0328, arf fullrun_mos1_xmm0679181501_pi300-10000_pass1_cl_src2.arf
[Sun May 27 10:56:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 27 10:56:35 2012] Updating source flux to 4.5e-13