[Sun May 27 04:03:10 2012] Detection parameters:
  Position = (220.1, 360.8) = 18 34 10.51 -65 29 12.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 23.9 +/- 6.8
  Background counts = 5.3
  Rate = 0.003 +/- 0.0009

[Sun May 27 04:03:10 2012] Off-axis axis estimate = 7.26'
[Sun May 27 05:13:28 2012] Using EEF radius (= 10.06 ")to estimate initial spatial extent for simple fitting
[Sun May 27 05:13:28 2012] Initial guess for spatial extent in simple fitting = 10.06"
[Sun May 27 05:13:28 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.138
[Sun May 27 05:13:28 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 10.06"
[Sun May 27 06:01:52 2012] fullrun_mos1_xmm0679181501_pi300-10000_cl_pass0_src20.ximg exists
[Sun May 27 06:01:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679181501_pi300-10000_cl_pass0_src20.csv
[Sun May 27 06:01:52 2012] fullrun_mos1_xmm0679181501_pi300-10000_cl_pass0_src20_1.ximg exists
[Sun May 27 06:01:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679181501_pi300-10000_cl_pass0_src20.csv
[Sun May 27 06:01:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0679181501_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0679181501_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 06:01:52 2012] fullrun_mos1_xmm0679181501_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Sun May 27 06:01:52 2012] fullrun_mos1_xmm0679181501_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Sun May 27 06:01:52 2012] Fit fullrun_mos1_xmm0679181501_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Sun May 27 06:44:20 2012] Spatial fit model total counts = 83.995400, observed total counts = 84.000000
[Sun May 27 06:44:20 2012] Offset between fit and detection position for source 19 = 0.814944 pixels
[Sun May 27 06:44:20 2012] 82.465400 total counts/ 40.212200 bgd. counts: snr = 6.663167
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.814944 pixels
  Position = (220.6, 361.3) = 18 34 10.11 -65 29 10.0
  Extent = 11.9 (7.1-20.1)", rotation angle = 0
  Source counts = 42.3 +/- 9.1
  Background counts = 40.2
  Rate = 0.003 +/- 0.0007
[Sun May 27 06:44:20 2012] Vigneting correction estimate = 1.000000
[Sun May 27 06:44:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 06:44:20 2012] Assessing source extent using major axis lower bound
[Sun May 27 06:44:20 2012] Source does appear to be extended
[Sun May 27 06:44:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 07:44:03 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 27 07:44:03 2012] Initial guess for spatial extent in simple fitting = 11.94"
[Sun May 27 07:44:03 2012] source mask rpix=2.7, npix_max = 42, mask sum = 49, frac = 1.164
[Sun May 27 07:44:03 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 11.94"
[Sun May 27 08:23:28 2012] fullrun_mos1_xmm0679181501_pi300-10000_cl_pass1_src18.ximg exists
[Sun May 27 08:23:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679181501_pi300-10000_cl_pass1_src18.csv
[Sun May 27 08:23:28 2012] fullrun_mos1_xmm0679181501_pi300-10000_cl_pass1_src18_1.ximg exists
[Sun May 27 08:23:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679181501_pi300-10000_cl_pass1_src18.csv
[Sun May 27 08:23:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0679181501_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0679181501_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 08:23:28 2012] fullrun_mos1_xmm0679181501_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Sun May 27 08:23:28 2012] fullrun_mos1_xmm0679181501_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Sun May 27 08:23:28 2012] Fit fullrun_mos1_xmm0679181501_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Sun May 27 09:06:20 2012] Warning, spatial fit 18 centroid is now closest to src. 18
[Sun May 27 09:06:20 2012] Vigneting correction estimate = 1.000000
[Sun May 27 09:06:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 09:06:20 2012] Assessing source extent using major axis lower bound
[Sun May 27 09:06:20 2012] Source does appear to be extended
[Sun May 27 09:06:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 09:56:14 2012] XMMSAS src. selection expression = ellipse(19146.897200, 31387.755400, 716.196021, 716.196021, 0.000000, X, Y)
[Sun May 27 09:56:14 2012] Writing source region out to fullrun_mos1_xmm0679181501_pi300-10000_pass1_cl_src19_src.reg
[Sun May 27 09:56:14 2012] Extracting stamp from image fullrun_mos1_xmm0679181501_pi300-10000_cl_sm2.00.img.gz, (179, 320) - (262, 402)
[Sun May 27 09:56:14 2012] XMMSAS bgd. selection expression = annulus(19146.897200, 31387.755400, 1193.660034, 2387.320069, X, Y)
[Sun May 27 09:56:14 2012] Writing fullrun_mos1_xmm0679181501_pi300-10000_pass1_cl_src19.gif
[Sun May 27 10:02:20 2012] Mean detx,y = (3297.39, -8740.11) 
[Sun May 27 10:02:21 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 27 10:02:41 2012] Binned source spectrum to 10 counts/bin
[Sun May 27 10:02:41 2012] Setting source spectrum file to fullrun_mos1_xmm0679181501_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Sun May 27 10:02:41 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0679181501_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Sun May 27 10:19:33 2012] Not generating rmf since there are only 42 counts
[Sun May 27 10:19:33 2012] rmf not generated due to insufficient counts
[Sun May 27 10:55:57 2012] Updating aperture counts using extracted products
[Sun May 27 10:55:58 2012] Error reading totcts from fullrun_mos1_xmm0679181501_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Sun May 27 10:55:59 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 27 10:55:59 2012] Using photon index=1.80, rate=0.00304, arf fullrun_mos1_xmm0679181501_pi300-10000_pass1_cl_src19.arf
[Sun May 27 10:55:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 27 10:55:59 2012] Updating source flux to 5.1e-14
[Sun May 27 10:56:02 2012] Source 19 has fewer than 100.000000 counts, skipping spectral fitting