[Wed Aug 29 01:19:32 2012] Detection parameters:
  Position = (297.5, 318.7) = 2 56 22.62 40 18 22.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 34.7 +/- 8.4
  Background counts = 6.8
  Rate = 0.002 +/- 0.0006

[Wed Aug 29 01:19:32 2012] Off-axis axis estimate = 1.47'
[Wed Aug 29 02:15:50 2012] Using EEF radius (= 7.16 ")to estimate initial spatial extent for simple fitting
[Wed Aug 29 02:15:50 2012] Initial guess for spatial extent in simple fitting = 7.16"
[Wed Aug 29 02:15:50 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.868
[Wed Aug 29 02:15:50 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 7.16"
[Wed Aug 29 02:52:43 2012] fullrun_mos2_xmm0679181301_pi300-10000_cl_pass0_src17.ximg exists
[Wed Aug 29 02:52:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0679181301_pi300-10000_cl_pass0_src17.csv
[Wed Aug 29 02:52:43 2012] fullrun_mos2_xmm0679181301_pi300-10000_cl_pass0_src17_1.ximg exists
[Wed Aug 29 02:52:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0679181301_pi300-10000_cl_pass0_src17.csv
[Wed Aug 29 02:52:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0679181301_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0679181301_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 29 02:52:43 2012] fullrun_mos2_xmm0679181301_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Wed Aug 29 02:52:43 2012] fullrun_mos2_xmm0679181301_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Wed Aug 29 02:52:43 2012] Fit fullrun_mos2_xmm0679181301_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Wed Aug 29 02:52:55 2012] Source 13 is offset by 4.914264 and -1.849469 pixels which is larger than
2 X fitted extent = 0.821582 x 0.821582, not incorporating fit results
[Wed Aug 29 02:52:55 2012] Warning, spatial fit 17 centroid is now closest to src. 5
[Wed Aug 29 02:52:55 2012] Vigneting correction estimate = 1.000000
[Wed Aug 29 02:52:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 29 02:52:55 2012] Assessing source extent using major
[Wed Aug 29 02:52:55 2012] Source does appear to be extended
[Wed Aug 29 02:52:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 29 02:52:55 2012] Source is confused with source 5
[Wed Aug 29 03:36:28 2012] Using EEF radius (= 7.16 ")to estimate initial spatial extent for simple fitting
[Wed Aug 29 03:36:28 2012] Initial guess for spatial extent in simple fitting = 7.16"
[Wed Aug 29 03:36:28 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.868
[Wed Aug 29 03:36:28 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 7.16"
[Wed Aug 29 04:04:34 2012] fullrun_mos2_xmm0679181301_pi300-10000_cl_pass1_src15.ximg exists
[Wed Aug 29 04:04:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0679181301_pi300-10000_cl_pass1_src15.csv
[Wed Aug 29 04:04:34 2012] fullrun_mos2_xmm0679181301_pi300-10000_cl_pass1_src15_1.ximg exists
[Wed Aug 29 04:04:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0679181301_pi300-10000_cl_pass1_src15.csv
[Wed Aug 29 04:04:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0679181301_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0679181301_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 29 04:04:34 2012] fullrun_mos2_xmm0679181301_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Wed Aug 29 04:04:34 2012] fullrun_mos2_xmm0679181301_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Wed Aug 29 04:04:34 2012] Fit fullrun_mos2_xmm0679181301_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Wed Aug 29 04:04:43 2012] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 49.754574 pixels away
[Wed Aug 29 04:04:43 2012] Warning, spatial fit 15 centroid is now closest to src. 5
[Wed Aug 29 04:04:43 2012] Vigneting correction estimate = 1.000000
[Wed Aug 29 04:04:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 29 04:04:43 2012] Assessing source extent using major
[Wed Aug 29 04:04:43 2012] Source does appear to be extended
[Wed Aug 29 04:04:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 29 04:13:54 2012] XMMSAS src. selection expression = ellipse(25832.860992, 27680.416229, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Aug 29 04:13:54 2012] Writing source region out to fullrun_mos2_xmm0679181301_pi300-10000_pass1_cl_src13_src.reg
[Wed Aug 29 04:13:54 2012] Extracting stamp from image fullrun_mos2_xmm0679181301_pi300-10000_cl_sm2.00.img.gz, (260, 281) - (335, 356)
[Wed Aug 29 04:13:54 2012] XMMSAS bgd. selection expression = annulus(25832.860992, 27680.416229, 1087.500000, 2175.000000, X, Y) && !ellipse(24746.221000, 26199.877200, 1104.064032, 1104.064032, 0.000000, X, Y) && !ellipse(25850.837800, 27131.320000, 1145.608033, 1145.608033, 0.000000, X, Y) && !ellipse(24830.489197, 27257.886902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25249.187317, 25494.931519, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26380.322723, 25891.215881, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug 29 04:13:54 2012] Writing fullrun_mos2_xmm0679181301_pi300-10000_pass1_cl_src13.gif
[Wed Aug 29 04:15:58 2012] Mean detx,y = (554.11, -3121.84) 
[Wed Aug 29 04:15:59 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 29 04:16:04 2012] grppha failed
[Wed Aug 29 04:16:04 2012] Setting source spectrum file to fullrun_mos2_xmm0679181301_pi300-10000_pass1_cl_src13_src.pi.gz
[Wed Aug 29 04:16:04 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0679181301_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Wed Aug 29 04:16:56 2012] Not generating rmf since there are only 34 counts
[Wed Aug 29 04:16:56 2012] rmf not generated due to insufficient counts
[Wed Aug 29 04:17:07 2012] Updating aperture counts using extracted products
[Wed Aug 29 04:17:07 2012] Error reading totcts from fullrun_mos2_xmm0679181301_pi300-10000_pass1_cl_src13_src.pi.gz
[Wed Aug 29 04:17:07 2012] No arf file for this source, not re-computing flux
[Wed Aug 29 04:17:09 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Aug 29 04:17:10 2012] xmm0679181301/analysis//spectral/fullrun_mos2_xmm0679181301_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete