[Wed Aug 29 01:19:17 2012] Detection parameters:
  Position = (191.8, 242.5) = 2 57 2.75 40 12 36.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 355.5 +/- 26.4
  Background counts = 6.3
  Rate = 0.04 +/- 0.003

[Wed Aug 29 01:19:17 2012] Off-axis axis estimate = 8.73'
[Wed Aug 29 01:52:47 2012] Using EEF radius (= 10.79 ")to estimate initial spatial extent for simple fitting
[Wed Aug 29 01:52:47 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Aug 29 01:52:47 2012] Initial guess for spatial extent in simple fitting = 10.79"
[Wed Aug 29 01:52:47 2012] source mask rpix=2.5, npix_max = 35, mask sum = 22, frac = 0.619
[Wed Aug 29 01:52:47 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.79"
[Wed Aug 29 02:15:49 2012] fullrun_mos1_xmm0679181301_pi300-10000_cl_pass0_src1.ximg exists
[Wed Aug 29 02:15:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679181301_pi300-10000_cl_pass0_src1.csv
[Wed Aug 29 02:15:49 2012] fullrun_mos1_xmm0679181301_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Aug 29 02:15:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679181301_pi300-10000_cl_pass0_src1.csv
[Wed Aug 29 02:15:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0679181301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0679181301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 29 02:15:49 2012] fullrun_mos1_xmm0679181301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Aug 29 02:15:49 2012] fullrun_mos1_xmm0679181301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Aug 29 02:15:49 2012] Fit fullrun_mos1_xmm0679181301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Aug 29 02:52:51 2012] Spatial fit model total counts = 314.679000, observed total counts = 333.000000
[Wed Aug 29 02:52:51 2012] Offset between fit and detection position for source 1 = 0.862361 pixels
[Wed Aug 29 02:52:51 2012] 315.535000 total counts/ 174.048000 bgd. counts: snr = 10.724623
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.862361 pixels
  Position = (192.0, 241.7) = 2 57 2.70 40 12 42.0
  Extent = 5.5 (4.5-6.6)", rotation angle = 0
  Source counts = 141.5 +/- 17.8
  Background counts = 174.0
  Rate = 0.009 +/- 0.001
[Wed Aug 29 02:52:51 2012] Vigneting correction estimate = 1.000000
[Wed Aug 29 02:52:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 29 02:52:51 2012] Assessing source extent using major axis lower bound
[Wed Aug 29 02:52:51 2012] Source does appear to be extended
[Wed Aug 29 02:52:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 29 03:21:45 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug 29 03:21:45 2012] Initial guess for spatial extent in simple fitting = 5.54"
[Wed Aug 29 03:21:45 2012] source mask rpix=1.3, npix_max = 12, mask sum = 7, frac = 0.557
[Wed Aug 29 03:21:45 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.54"
[Wed Aug 29 03:36:28 2012] fullrun_mos1_xmm0679181301_pi300-10000_cl_pass1_src1.ximg exists
[Wed Aug 29 03:36:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679181301_pi300-10000_cl_pass1_src1.csv
[Wed Aug 29 03:36:28 2012] fullrun_mos1_xmm0679181301_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Aug 29 03:36:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679181301_pi300-10000_cl_pass1_src1.csv
[Wed Aug 29 03:36:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0679181301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0679181301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 29 03:36:28 2012] fullrun_mos1_xmm0679181301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Aug 29 03:36:28 2012] fullrun_mos1_xmm0679181301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Aug 29 03:36:28 2012] Fit fullrun_mos1_xmm0679181301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Aug 29 04:04:40 2012] Spatial fit model total counts = 260.860000, observed total counts = 288.000000
[Wed Aug 29 04:04:40 2012] Offset between fit and detection position for source 1 = 0.007672 pixels
[Wed Aug 29 04:04:40 2012] 263.410000 total counts/ 123.551000 bgd. counts: snr = 12.582510
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.007672 pixels
  Position = (192.0, 241.7) = 2 57 2.70 40 12 42.0
  Extent = 5.3 (4.5-6.5)", rotation angle = 0
  Source counts = 139.9 +/- 16.2
  Background counts = 123.6
  Rate = 0.008 +/- 0.001
[Wed Aug 29 04:04:40 2012] Vigneting correction estimate = 1.000000
[Wed Aug 29 04:04:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 29 04:04:40 2012] Assessing source extent using major axis lower bound
[Wed Aug 29 04:04:40 2012] Source does appear to be extended
[Wed Aug 29 04:04:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 29 04:11:58 2012] XMMSAS src. selection expression = ellipse(16651.799960, 20975.588800, 320.196609, 320.196609, 0.000000, X, Y)
[Wed Aug 29 04:11:58 2012] Writing source region out to fullrun_mos1_xmm0679181301_pi300-10000_pass1_cl_src1_src.reg
[Wed Aug 29 04:11:58 2012] Extracting stamp from image fullrun_mos1_xmm0679181301_pi300-10000_cl_sm2.00.img.gz, (174, 223) - (210, 260)
[Wed Aug 29 04:11:58 2012] XMMSAS bgd. selection expression = annulus(16651.799960, 20975.588800, 533.661015, 1067.322031, X, Y)
[Wed Aug 29 04:11:58 2012] Writing fullrun_mos1_xmm0679181301_pi300-10000_pass1_cl_src1.gif
[Wed Aug 29 04:11:59 2012] Mean detx,y = (6207.72, 5869.24) 
[Wed Aug 29 04:12:00 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 29 04:12:08 2012] grppha failed
[Wed Aug 29 04:12:08 2012] Setting source spectrum file to fullrun_mos1_xmm0679181301_pi300-10000_pass1_cl_src1_src.pi.gz
[Wed Aug 29 04:12:08 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0679181301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Aug 29 04:17:07 2012] Updating aperture counts using extracted products
[Wed Aug 29 04:17:07 2012] Error reading totcts from fullrun_mos1_xmm0679181301_pi300-10000_pass1_cl_src1_src.pi.gz
[Wed Aug 29 04:17:07 2012] No arf file for this source, not re-computing flux
[Wed Aug 29 04:17:08 2012] Source 1 has no response, skipping
[Wed Aug 29 04:17:09 2012] xmm0679181301/analysis//spectral/fullrun_mos1_xmm0679181301_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete