[Thu Jun 13 00:38:53 2013] Detection parameters:
  Position = (321.1, 293.9) = 21 0 38.08 -33 7 56.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 157.1 +/- 16.5
  Background counts = 11.3
  Rate = 0.02 +/- 0.002

[Thu Jun 13 00:38:53 2013] Off-axis axis estimate = 1.68'
[Thu Jun 13 00:39:09 2013] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 00:39:09 2013] Initial guess for spatial extent in simple fitting = 7.27"
[Thu Jun 13 00:39:09 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.849
[Thu Jun 13 00:39:09 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 7.27"
[Thu Jun 13 00:39:11 2013] fullrun_pn_xmm0679181201_pi300-10000_cl_pass0_src19.ximg exists
[Thu Jun 13 00:39:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0679181201_pi300-10000_cl_pass0_src19.csv
[Thu Jun 13 00:39:11 2013] fullrun_pn_xmm0679181201_pi300-10000_cl_pass0_src19_1.ximg exists
[Thu Jun 13 00:39:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0679181201_pi300-10000_cl_pass0_src19.csv
[Thu Jun 13 00:39:11 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0679181201_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0679181201_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 00:39:11 2013] fullrun_pn_xmm0679181201_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Thu Jun 13 00:39:11 2013] fullrun_pn_xmm0679181201_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Thu Jun 13 00:39:11 2013] Fit fullrun_pn_xmm0679181201_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Thu Jun 13 00:39:19 2013] Spatial fit model total counts = 369.386000, observed total counts = 370.000000
[Thu Jun 13 00:39:19 2013] Offset between fit and detection position for source 20 = 2.204071 pixels
[Thu Jun 13 00:39:19 2013] Warning, changing simple spatial fit ID from 19 to 17
[Thu Jun 13 00:39:19 2013] 354.016100 total counts/ 287.165000 bgd. counts: snr = 3.944962
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 2.204071 pixels
  Position = (323.0, 292.8) = 21 0 37.41 -33 8 1.0
  Extent = 10.9 (5.6-15.1)", rotation angle = 0
  Source counts = 66.9 +/- 18.8
  Background counts = 287.2
  Rate = 0.007 +/- 0.002
[Thu Jun 13 00:39:19 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 00:39:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 00:39:19 2013] Assessing source extent using major axis lower bound
[Thu Jun 13 00:39:19 2013] Source does appear to be extended
[Thu Jun 13 00:39:19 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 00:39:19 2013] Source is confused with source 23
[Thu Jun 13 00:39:32 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 13 00:39:32 2013] Initial guess for spatial extent in simple fitting = 10.92"
[Thu Jun 13 00:39:32 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.993
[Thu Jun 13 00:39:32 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 10.92"
[Thu Jun 13 00:39:32 2013] fullrun_pn_xmm0679181201_pi300-10000_cl_pass1_src17.ximg exists
[Thu Jun 13 00:39:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0679181201_pi300-10000_cl_pass1_src17.csv
[Thu Jun 13 00:39:32 2013] fullrun_pn_xmm0679181201_pi300-10000_cl_pass1_src17_1.ximg exists
[Thu Jun 13 00:39:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0679181201_pi300-10000_cl_pass1_src17.csv
[Thu Jun 13 00:39:32 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0679181201_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0679181201_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 00:39:33 2013] fullrun_pn_xmm0679181201_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Thu Jun 13 00:39:33 2013] fullrun_pn_xmm0679181201_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Thu Jun 13 00:39:33 2013] Fit fullrun_pn_xmm0679181201_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Thu Jun 13 00:39:39 2013] Spatial fit model total counts = 369.114000, observed total counts = 370.000000
[Thu Jun 13 00:39:39 2013] Offset between fit and detection position for source 20 = 0.274184 pixels
[Thu Jun 13 00:39:39 2013] Warning, changing simple spatial fit ID from 17 to 15
[Thu Jun 13 00:39:39 2013] 359.575300 total counts/ 285.356000 bgd. counts: snr = 4.393629
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.274184 pixels
  Position = (323.0, 293.1) = 21 0 37.41 -33 7 59.8
  Extent = 10.4 (7.0-15.1)", rotation angle = 0
  Source counts = 74.2 +/- 19.0
  Background counts = 285.4
  Rate = 0.007 +/- 0.002
[Thu Jun 13 00:39:39 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 00:39:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 00:39:39 2013] Assessing source extent using major axis lower bound
[Thu Jun 13 00:39:39 2013] Source does appear to be extended
[Thu Jun 13 00:39:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 00:39:53 2013] XMMSAS src. selection expression = ellipse(28056.160000, 25450.384000, 624.834018, 624.834018, 0.000000, X, Y)
[Thu Jun 13 00:39:53 2013] Not overwriting source region fullrun_pn_xmm0679181201_pi300-10000_pass1_cl_src20_src.reg
[Thu Jun 13 00:39:53 2013] Extracting stamp from image fullrun_pn_xmm0679181201_pi300-10000_cl_sm2.00.img.gz, (287, 257) - (359, 329)
[Thu Jun 13 00:39:53 2013] XMMSAS bgd. selection expression = annulus(28056.160000, 25450.384000, 1041.390030, 2082.780060, X, Y) && !ellipse(28254.879608, 26386.986847, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28644.229034, 25789.390198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27192.836029, 25042.825165, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27748.352000, 25430.140000, 1131.704033, 503.714414, 328.761000, X, Y)
[Thu Jun 13 00:39:53 2013] Writing fullrun_pn_xmm0679181201_pi300-10000_pass1_cl_src20.gif
[Thu Jun 13 00:39:54 2013] ../../xmm0679181201/products/events/fullrun_pn_xmm0679181201_pi300-10000_pass1_cl_src20_src.evt and ../../xmm0679181201/products/events/fullrun_pn_xmm0679181201_pi300-10000_pass1_cl_src20_bgd.evt exist, delete to re-create
[Thu Jun 13 00:39:54 2013] Mean detx,y = (1082.47, 1292.49) 
[Thu Jun 13 00:39:54 2013] ../../xmm0679181201/products/images/fullrun_pn_xmm0679181201_pi300-10000_pass1_cl_src20_src.img and ../../xmm0679181201/products/images/fullrun_pn_xmm0679181201_pi300-10000_pass1_cl_src20_bgd.img exist, delete to re-create
[Thu Jun 13 00:39:54 2013] ../../xmm0679181201/products/spectra/fullrun_pn_xmm0679181201_pi300-10000_pass1_cl_src20_src_b10.pi.gz and ../../xmm0679181201/products/spectra/fullrun_pn_xmm0679181201_pi300-10000_pass1_cl_src20_bgd.pi exist, delete to re-create
[Thu Jun 13 00:39:54 2013] Setting source spectrum file to fullrun_pn_xmm0679181201_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Thu Jun 13 00:39:54 2013] Setting bgd. spectrum file to fullrun_pn_xmm0679181201_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Thu Jun 13 00:39:54 2013] ../../xmm0679181201/products/lightcurves/fullrun_pn_xmm0679181201_pi300-10000_pass1_cl_src20_src.lc and ../../xmm0679181201/products/lightcurves/fullrun_pn_xmm0679181201_pi300-10000_pass1_cl_src20_bgd.lc exist, delete to re-create
[Thu Jun 13 00:39:57 2013] Not generating rmf since there are only 74 counts
[Thu Jun 13 00:39:57 2013] rmf not generated due to insufficient counts
[Thu Jun 13 00:39:57 2013] fullrun_pn_xmm0679181201_pi300-10000_pass1_cl_src20.arf exists, delete to re-create
[Thu Jun 13 00:44:22 2013] Updating aperture counts using extracted products
[Thu Jun 13 00:44:22 2013] Total counts from fullrun_pn_xmm0679181201_pi300-10000_pass1_cl_src20_src_b10.pi.gz = 395.00
[Thu Jun 13 00:44:22 2013] Total counts from fullrun_pn_xmm0679181201_pi300-10000_pass1_cl_src20_bgd.pi.gz = 598.00
[Thu Jun 13 00:44:22 2013] Got source and background scale factors 1222400.000000, 6968836.000000
[Thu Jun 13 00:44:22 2013] User source parameters:
  Position = (323.0, 293.1) = 21 0 37.41 -33 7 59.8
  Extent = 10.4 (7.0-15.1)", rotation angle = 0
  Source aperture counts = 290.1 +/- 20.9
  Background aperture counts = 104.9
  Rate = 0.03 +/- 0.002

[Thu Jun 13 00:44:24 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 13 00:44:24 2013] Using photon index=1.80, rate=0.00739, arf fullrun_pn_xmm0679181201_pi300-10000_pass1_cl_src20.arf
[Thu Jun 13 00:44:24 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 13 00:44:24 2013] Updating source flux to 2.1e-14
[Thu Jun 13 00:44:35 2013] Flag c found in src. 20 procflags, skipping spectral fitting
[Thu Jun 13 00:44:35 2013] Source 20 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Jun 13 00:44:36 2013] xmm0679181201/analysis//spectral/fullrun_pn_xmm0679181201_pi300-10000_pass1_cl_src20_pl.csv not found, spectral fit skipped or did not complete