[Thu Jun 13 00:38:55 2013] Detection parameters:
  Position = (323.8, 282.9) = 21 0 37.14 -33 8 45.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 33.9 +/- 8.3
  Background counts = 5.9
  Rate = 0.003 +/- 0.0006

[Thu Jun 13 00:38:55 2013] Off-axis axis estimate = 2.16'
[Thu Jun 13 00:39:12 2013] Using EEF radius (= 7.51 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 00:39:12 2013] Initial guess for spatial extent in simple fitting = 7.51"
[Thu Jun 13 00:39:12 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.807
[Thu Jun 13 00:39:12 2013] Giving source the simple spatial ID 12 for pass 0, mean size = 7.51"
[Thu Jun 13 00:39:13 2013] fullrun_mos2_xmm0679181201_pi300-10000_cl_pass0_src12.ximg exists
[Thu Jun 13 00:39:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0679181201_pi300-10000_cl_pass0_src12.csv
[Thu Jun 13 00:39:13 2013] fullrun_mos2_xmm0679181201_pi300-10000_cl_pass0_src12_1.ximg exists
[Thu Jun 13 00:39:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0679181201_pi300-10000_cl_pass0_src12.csv
[Thu Jun 13 00:39:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0679181201_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0679181201_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 00:39:13 2013] fullrun_mos2_xmm0679181201_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Thu Jun 13 00:39:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0679181201_pi300-10000_cl_pass0_tfrozen_src12.csv
[Thu Jun 13 00:39:13 2013] fullrun_mos2_xmm0679181201_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Thu Jun 13 00:39:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0679181201_pi300-10000_cl_pass0_tfrozen_src12.csv
[Thu Jun 13 00:39:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0679181201_pi300-10000_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0679181201_pi300-10000_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 00:39:24 2013] Source 15 is offset by 2.084718 and -7.676268 pixels which is larger than
2 X fitted extent = 0.935025 x 0.935025, not incorporating fit results
[Thu Jun 13 00:39:24 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 00:39:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 00:39:24 2013] Assessing source extent using major
[Thu Jun 13 00:39:24 2013] Source does appear to be extended
[Thu Jun 13 00:39:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 00:39:33 2013] Using EEF radius (= 7.51 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 00:39:33 2013] Initial guess for spatial extent in simple fitting = 7.51"
[Thu Jun 13 00:39:33 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.807
[Thu Jun 13 00:39:33 2013] Giving source the simple spatial ID 12 for pass 1, mean size = 7.51"
[Thu Jun 13 00:39:34 2013] fullrun_mos2_xmm0679181201_pi300-10000_cl_pass1_src12.ximg exists
[Thu Jun 13 00:39:34 2013] fullrun_mos2_xmm0679181201_pi300-10000_cl_pass1_src12_1.ximg exists
[Thu Jun 13 00:39:34 2013] Fit fullrun_mos2_xmm0679181201_pi300-10000_cl_pass1_src12 appears to have run properly
[Thu Jun 13 00:39:34 2013] fullrun_mos2_xmm0679181201_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Thu Jun 13 00:39:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0679181201_pi300-10000_cl_pass1_tfrozen_src12.csv
[Thu Jun 13 00:39:34 2013] fullrun_mos2_xmm0679181201_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Thu Jun 13 00:39:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0679181201_pi300-10000_cl_pass1_tfrozen_src12.csv
[Thu Jun 13 00:39:34 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0679181201_pi300-10000_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0679181201_pi300-10000_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 00:39:45 2013] Source 15 is offset by 2.149647 and -7.669464 pixels which is larger than
2 X fitted extent = 0.863080 x 0.863080, not incorporating fit results
[Thu Jun 13 00:39:45 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 00:39:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 00:39:45 2013] Assessing source extent using major
[Thu Jun 13 00:39:45 2013] Source does appear to be extended
[Thu Jun 13 00:39:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 00:39:59 2013] XMMSAS src. selection expression = ellipse(28122.019287, 24562.004669, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 13 00:39:59 2013] Not overwriting source region fullrun_mos2_xmm0679181201_pi300-10000_pass1_cl_src15_src.reg
[Thu Jun 13 00:39:59 2013] Extracting stamp from image fullrun_mos2_xmm0679181201_pi300-10000_cl_sm2.00.img.gz, (286, 245) - (361, 320)
[Thu Jun 13 00:39:59 2013] XMMSAS bgd. selection expression = annulus(28122.019287, 24562.004669, 1087.500000, 2175.000000, X, Y) && !ellipse(28270.000000, 27256.957642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28045.796020, 25327.421600, 909.832026, 576.320817, 82.018000, X, Y) && !ellipse(28009.010620, 25941.491516, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 13 00:39:59 2013] Writing fullrun_mos2_xmm0679181201_pi300-10000_pass1_cl_src15.gif
[Thu Jun 13 00:41:43 2013] Mean detx,y = (-1224.61, -2104.80) 
[Thu Jun 13 00:41:43 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 13 00:41:51 2013] Binned source spectrum to 10 counts/bin
[Thu Jun 13 00:41:51 2013] Setting source spectrum file to fullrun_mos2_xmm0679181201_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Thu Jun 13 00:41:51 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0679181201_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Thu Jun 13 00:43:50 2013] Not generating rmf since there are only 33 counts
[Thu Jun 13 00:43:50 2013] rmf not generated due to insufficient counts
[Thu Jun 13 00:44:29 2013] Updating aperture counts using extracted products
[Thu Jun 13 00:44:29 2013] Total counts from fullrun_mos2_xmm0679181201_pi300-10000_pass1_cl_src15_src_b10.pi.gz = 121.00
[Thu Jun 13 00:44:30 2013] Total counts from fullrun_mos2_xmm0679181201_pi300-10000_pass1_cl_src15_bgd.pi.gz = 353.00
[Thu Jun 13 00:44:30 2013] Got source and background scale factors 1329600.000000, 9161652.000000
[Thu Jun 13 00:44:30 2013] User source parameters:
  Position = (323.8, 282.9) = 21 0 37.14 -33 8 45.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 69.8 +/- 12.0
  Background aperture counts = 51.2
  Rate = 0.005 +/- 0.0009

[Thu Jun 13 00:44:30 2013] Updating counts from extracted products
[Thu Jun 13 00:44:30 2013] Set source signif. to 69.77/7.16 = 9.75
[Thu Jun 13 00:44:30 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 13 00:44:30 2013] Using photon index=1.80, rate=0.00501, arf fullrun_mos2_xmm0679181201_pi300-10000_pass1_cl_src15.arf
[Thu Jun 13 00:44:30 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 13 00:44:30 2013] Updating source flux to 5e-14
[Thu Jun 13 00:44:34 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 13 00:44:35 2013] xmm0679181201/analysis//spectral/fullrun_mos2_xmm0679181201_pi300-10000_pass1_cl_src15_pl.csv not found, spectral fit skipped or did not complete