[Thu Jun 13 00:38:54 2013] Detection parameters:
  Position = (414.0, 384.1) = 21 0 5.95 -33 1 23.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 64.6 +/- 10.0
  Background counts = 3.7
  Rate = 0.009 +/- 0.001

[Thu Jun 13 00:38:55 2013] Off-axis axis estimate = 10.43'
[Thu Jun 13 00:39:12 2013] Using EEF radius (= 11.64 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 00:39:12 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 13 00:39:12 2013] Initial guess for spatial extent in simple fitting = 11.64"
[Thu Jun 13 00:39:12 2013] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.892
[Thu Jun 13 00:39:12 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 11.64"
[Thu Jun 13 00:39:13 2013] fullrun_mos2_xmm0679181201_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jun 13 00:39:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0679181201_pi300-10000_cl_pass0_src1.csv
[Thu Jun 13 00:39:13 2013] fullrun_mos2_xmm0679181201_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jun 13 00:39:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0679181201_pi300-10000_cl_pass0_src1.csv
[Thu Jun 13 00:39:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0679181201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0679181201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 00:39:13 2013] fullrun_mos2_xmm0679181201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jun 13 00:39:13 2013] fullrun_mos2_xmm0679181201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jun 13 00:39:13 2013] Fit fullrun_mos2_xmm0679181201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Jun 13 00:39:24 2013] Spatial fit model total counts = 124.210000, observed total counts = 112.000000
[Thu Jun 13 00:39:24 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 13 00:39:24 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 00:39:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 00:39:24 2013] Assessing source extent using major
[Thu Jun 13 00:39:24 2013] Source does appear to be extended
[Thu Jun 13 00:39:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 00:39:33 2013] Using EEF radius (= 11.64 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 00:39:33 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 13 00:39:33 2013] Initial guess for spatial extent in simple fitting = 11.64"
[Thu Jun 13 00:39:33 2013] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.892
[Thu Jun 13 00:39:33 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 11.64"
[Thu Jun 13 00:39:34 2013] fullrun_mos2_xmm0679181201_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jun 13 00:39:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0679181201_pi300-10000_cl_pass1_src1.csv
[Thu Jun 13 00:39:34 2013] fullrun_mos2_xmm0679181201_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jun 13 00:39:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0679181201_pi300-10000_cl_pass1_src1.csv
[Thu Jun 13 00:39:34 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0679181201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0679181201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 00:39:34 2013] fullrun_mos2_xmm0679181201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jun 13 00:39:34 2013] fullrun_mos2_xmm0679181201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jun 13 00:39:34 2013] Fit fullrun_mos2_xmm0679181201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Jun 13 00:39:45 2013] Spatial fit model total counts = 111.677000, observed total counts = 112.000000
[Thu Jun 13 00:39:45 2013] Offset between fit and detection position for source 1 = 0.312061 pixels
[Thu Jun 13 00:39:45 2013] 114.508100 total counts/ 71.488300 bgd. counts: snr = 5.088045
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.312061 pixels
  Position = (413.7, 384.1) = 21 0 6.06 -33 1 23.5
  Extent = 4.5 (3.7-5.8)", rotation angle = 0
  Source counts = 43.0 +/- 10.7
  Background counts = 71.5
  Rate = 0.003 +/- 0.0008
[Thu Jun 13 00:39:45 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 00:39:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 00:39:45 2013] Assessing source extent using major axis lower bound
[Thu Jun 13 00:39:45 2013] Source does appear to be extended
[Thu Jun 13 00:39:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 00:39:59 2013] XMMSAS src. selection expression = ellipse(35944.934740, 33369.122600, 272.013008, 272.013008, 0.000000, X, Y)
[Thu Jun 13 00:39:59 2013] Not overwriting source region fullrun_mos2_xmm0679181201_pi300-10000_pass1_cl_src1_src.reg
[Thu Jun 13 00:39:59 2013] Extracting stamp from image fullrun_mos2_xmm0679181201_pi300-10000_cl_sm2.00.img.gz, (398, 368) - (429, 400)
[Thu Jun 13 00:39:59 2013] XMMSAS bgd. selection expression = annulus(35944.934740, 33369.122600, 453.355013, 906.710026, X, Y)
[Thu Jun 13 00:39:59 2013] Writing fullrun_mos2_xmm0679181201_pi300-10000_pass1_cl_src1.gif
[Thu Jun 13 00:39:59 2013] ../../xmm0679181201/products/events/fullrun_mos2_xmm0679181201_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0679181201/products/events/fullrun_mos2_xmm0679181201_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Thu Jun 13 00:39:59 2013] Mean detx,y = (-5939.77, 8629.17) 
[Thu Jun 13 00:39:59 2013] ../../xmm0679181201/products/images/fullrun_mos2_xmm0679181201_pi300-10000_pass1_cl_src1_src.img and ../../xmm0679181201/products/images/fullrun_mos2_xmm0679181201_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Thu Jun 13 00:39:59 2013] ../../xmm0679181201/products/spectra/fullrun_mos2_xmm0679181201_pi300-10000_pass1_cl_src1_src_b10.pi.gz and ../../xmm0679181201/products/spectra/fullrun_mos2_xmm0679181201_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Thu Jun 13 00:39:59 2013] Setting source spectrum file to fullrun_mos2_xmm0679181201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jun 13 00:39:59 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0679181201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Jun 13 00:39:59 2013] ../../xmm0679181201/products/lightcurves/fullrun_mos2_xmm0679181201_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0679181201/products/lightcurves/fullrun_mos2_xmm0679181201_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Thu Jun 13 00:42:24 2013] Not generating rmf since there are only 43 counts
[Thu Jun 13 00:42:24 2013] rmf not generated due to insufficient counts
[Thu Jun 13 00:44:28 2013] Updating aperture counts using extracted products
[Thu Jun 13 00:44:28 2013] Total counts from fullrun_mos2_xmm0679181201_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 47.00
[Thu Jun 13 00:44:28 2013] Total counts from fullrun_mos2_xmm0679181201_pi300-10000_pass1_cl_src1_bgd.pi.gz = 45.00
[Thu Jun 13 00:44:28 2013] Got source and background scale factors 236800.000000, 1940800.000000
[Thu Jun 13 00:44:28 2013] User source parameters:
  Position = (413.7, 384.1) = 21 0 6.06 -33 1 23.5
  Extent = 4.5 (3.7-5.8)", rotation angle = 0
  Source aperture counts = 41.5 +/- 7.9
  Background aperture counts = 5.5
  Rate = 0.003 +/- 0.0006

[Thu Jun 13 00:44:30 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 13 00:44:30 2013] Using photon index=1.80, rate=0.00309, arf fullrun_mos2_xmm0679181201_pi300-10000_pass1_cl_src1.arf
[Thu Jun 13 00:44:30 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 13 00:44:30 2013] Updating source flux to 1e-13
[Thu Jun 13 00:44:34 2013] Flag p found in src. 1 procflags, skipping spectral fitting
[Thu Jun 13 00:44:34 2013] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Jun 13 00:44:35 2013] xmm0679181201/analysis//spectral/fullrun_mos2_xmm0679181201_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete