[Thu Jun 13 00:38:54 2013] Detection parameters:
  Position = (277.2, 342.2) = 21 0 53.27 -33 4 19.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 39.6 +/- 8.4
  Background counts = 4.0
  Rate = 0.004 +/- 0.0008

[Thu Jun 13 00:38:54 2013] Off-axis axis estimate = 3.53'
[Thu Jun 13 00:39:11 2013] Using EEF radius (= 8.19 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 00:39:11 2013] Initial guess for spatial extent in simple fitting = 8.19"
[Thu Jun 13 00:39:11 2013] source mask rpix=1.9, npix_max = 22, mask sum = 22, frac = 0.968
[Thu Jun 13 00:39:11 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 8.19"
[Thu Jun 13 00:39:12 2013] fullrun_mos1_xmm0679181201_pi300-10000_cl_pass0_src5.ximg exists
[Thu Jun 13 00:39:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679181201_pi300-10000_cl_pass0_src5.csv
[Thu Jun 13 00:39:12 2013] fullrun_mos1_xmm0679181201_pi300-10000_cl_pass0_src5_1.ximg exists
[Thu Jun 13 00:39:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679181201_pi300-10000_cl_pass0_src5.csv
[Thu Jun 13 00:39:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0679181201_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0679181201_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 00:39:12 2013] fullrun_mos1_xmm0679181201_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Thu Jun 13 00:39:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679181201_pi300-10000_cl_pass0_tfrozen_src5.csv
[Thu Jun 13 00:39:12 2013] fullrun_mos1_xmm0679181201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Thu Jun 13 00:39:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679181201_pi300-10000_cl_pass0_tfrozen_src5.csv
[Thu Jun 13 00:39:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0679181201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0679181201_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 00:39:21 2013] Spatial fit model total counts = 49.136700, observed total counts = 60.000000
[Thu Jun 13 00:39:21 2013] Poor agreement between spatial fit and data for source 7
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 13 00:39:21 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 00:39:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 00:39:21 2013] Assessing source extent using major
[Thu Jun 13 00:39:21 2013] Source does appear to be extended
[Thu Jun 13 00:39:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 00:39:33 2013] Using EEF radius (= 8.19 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 00:39:33 2013] Initial guess for spatial extent in simple fitting = 8.19"
[Thu Jun 13 00:39:33 2013] source mask rpix=1.9, npix_max = 22, mask sum = 22, frac = 0.968
[Thu Jun 13 00:39:33 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 8.19"
[Thu Jun 13 00:39:33 2013] fullrun_mos1_xmm0679181201_pi300-10000_cl_pass1_src5.ximg exists
[Thu Jun 13 00:39:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679181201_pi300-10000_cl_pass1_src5.csv
[Thu Jun 13 00:39:33 2013] fullrun_mos1_xmm0679181201_pi300-10000_cl_pass1_src5_1.ximg exists
[Thu Jun 13 00:39:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679181201_pi300-10000_cl_pass1_src5.csv
[Thu Jun 13 00:39:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0679181201_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0679181201_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 00:39:33 2013] fullrun_mos1_xmm0679181201_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Thu Jun 13 00:39:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679181201_pi300-10000_cl_pass1_tfrozen_src5.csv
[Thu Jun 13 00:39:33 2013] fullrun_mos1_xmm0679181201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Thu Jun 13 00:39:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679181201_pi300-10000_cl_pass1_tfrozen_src5.csv
[Thu Jun 13 00:39:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0679181201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0679181201_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 00:39:43 2013] Source 7 is offset by -4.685541 and 4.108331 pixels which is larger than
2 X fitted extent = 0.613457 x 4.907678, not incorporating fit results
[Thu Jun 13 00:39:43 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 00:39:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 00:39:43 2013] Assessing source extent using major
[Thu Jun 13 00:39:43 2013] Source does appear to be extended
[Thu Jun 13 00:39:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 00:39:57 2013] XMMSAS src. selection expression = ellipse(24069.825958, 29722.956818, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 13 00:39:57 2013] Not overwriting source region fullrun_mos1_xmm0679181201_pi300-10000_pass1_cl_src7_src.reg
[Thu Jun 13 00:39:57 2013] Extracting stamp from image fullrun_mos1_xmm0679181201_pi300-10000_cl_sm2.00.img.gz, (240, 305) - (315, 380)
[Thu Jun 13 00:39:57 2013] XMMSAS bgd. selection expression = annulus(24069.825958, 29722.956818, 1087.500000, 2175.000000, X, Y)
[Thu Jun 13 00:39:57 2013] Writing fullrun_mos1_xmm0679181201_pi300-10000_pass1_cl_src7.gif
[Thu Jun 13 00:39:57 2013] ../../xmm0679181201/products/events/fullrun_mos1_xmm0679181201_pi300-10000_pass1_cl_src7_src.evt and ../../xmm0679181201/products/events/fullrun_mos1_xmm0679181201_pi300-10000_pass1_cl_src7_bgd.evt exist, delete to re-create
[Thu Jun 13 00:39:57 2013] Mean detx,y = (1622.02, -4340.19) 
[Thu Jun 13 00:39:57 2013] ../../xmm0679181201/products/images/fullrun_mos1_xmm0679181201_pi300-10000_pass1_cl_src7_src.img and ../../xmm0679181201/products/images/fullrun_mos1_xmm0679181201_pi300-10000_pass1_cl_src7_bgd.img exist, delete to re-create
[Thu Jun 13 00:39:57 2013] ../../xmm0679181201/products/spectra/fullrun_mos1_xmm0679181201_pi300-10000_pass1_cl_src7_src_b10.pi.gz and ../../xmm0679181201/products/spectra/fullrun_mos1_xmm0679181201_pi300-10000_pass1_cl_src7_bgd.pi exist, delete to re-create
[Thu Jun 13 00:39:57 2013] Setting source spectrum file to fullrun_mos1_xmm0679181201_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Thu Jun 13 00:39:57 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0679181201_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Thu Jun 13 00:39:57 2013] ../../xmm0679181201/products/lightcurves/fullrun_mos1_xmm0679181201_pi300-10000_pass1_cl_src7_src.lc and ../../xmm0679181201/products/lightcurves/fullrun_mos1_xmm0679181201_pi300-10000_pass1_cl_src7_bgd.lc exist, delete to re-create
[Thu Jun 13 00:39:59 2013] Not generating rmf since there are only 39 counts
[Thu Jun 13 00:39:59 2013] rmf not generated due to insufficient counts
[Thu Jun 13 00:39:59 2013] fullrun_mos1_xmm0679181201_pi300-10000_pass1_cl_src7.arf exists, delete to re-create
[Thu Jun 13 00:44:24 2013] Updating aperture counts using extracted products
[Thu Jun 13 00:44:24 2013] Total counts from fullrun_mos1_xmm0679181201_pi300-10000_pass1_cl_src7_src_b10.pi.gz = 52.00
[Thu Jun 13 00:44:24 2013] Total counts from fullrun_mos1_xmm0679181201_pi300-10000_pass1_cl_src7_bgd.pi.gz = 257.00
[Thu Jun 13 00:44:24 2013] Got source and background scale factors 1265740.000000, 10737492.000000
[Thu Jun 13 00:44:24 2013] User source parameters:
  Position = (277.2, 342.2) = 21 0 53.27 -33 4 19.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 21.7 +/- 8.3
  Background aperture counts = 30.3
  Rate = 0.002 +/- 0.0006

[Thu Jun 13 00:44:24 2013] Updating counts from extracted products
[Thu Jun 13 00:44:24 2013] Set source signif. to 21.70/5.50 = 3.94
[Thu Jun 13 00:44:27 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 13 00:44:27 2013] Using photon index=1.80, rate=0.00156, arf fullrun_mos1_xmm0679181201_pi300-10000_pass1_cl_src7.arf
[Thu Jun 13 00:44:27 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 13 00:44:27 2013] Updating source flux to 2e-14
[Thu Jun 13 00:44:32 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 13 00:44:34 2013] xmm0679181201/analysis//spectral/fullrun_mos1_xmm0679181201_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete