[Thu Jun 13 00:38:54 2013] Detection parameters:
  Position = (389.7, 273.6) = 21 0 14.31 -33 9 24.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 32.7 +/- 7.1
  Background counts = 4.3
  Rate = 0.003 +/- 0.0007

[Thu Jun 13 00:38:54 2013] Off-axis axis estimate = 6.86'
[Thu Jun 13 00:39:11 2013] Using EEF radius (= 9.86 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 00:39:11 2013] Initial guess for spatial extent in simple fitting = 9.86"
[Thu Jun 13 00:39:11 2013] source mask rpix=2.3, npix_max = 30, mask sum = 17, frac = 0.555
[Thu Jun 13 00:39:11 2013] Giving source the simple spatial ID 7 for pass 0, mean size = 9.86"
[Thu Jun 13 00:39:12 2013] fullrun_mos1_xmm0679181201_pi300-10000_cl_pass0_src7.ximg exists
[Thu Jun 13 00:39:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679181201_pi300-10000_cl_pass0_src7.csv
[Thu Jun 13 00:39:12 2013] fullrun_mos1_xmm0679181201_pi300-10000_cl_pass0_src7_1.ximg exists
[Thu Jun 13 00:39:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679181201_pi300-10000_cl_pass0_src7.csv
[Thu Jun 13 00:39:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0679181201_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0679181201_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 00:39:12 2013] fullrun_mos1_xmm0679181201_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Thu Jun 13 00:39:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679181201_pi300-10000_cl_pass0_tfrozen_src7.csv
[Thu Jun 13 00:39:12 2013] fullrun_mos1_xmm0679181201_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Thu Jun 13 00:39:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679181201_pi300-10000_cl_pass0_tfrozen_src7.csv
[Thu Jun 13 00:39:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0679181201_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0679181201_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 00:39:21 2013] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 13.615247 pixels away
[Thu Jun 13 00:39:21 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 00:39:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 00:39:21 2013] Assessing source extent using major
[Thu Jun 13 00:39:21 2013] Source does appear to be extended
[Thu Jun 13 00:39:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 00:39:33 2013] Using EEF radius (= 9.86 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 00:39:33 2013] Initial guess for spatial extent in simple fitting = 9.86"
[Thu Jun 13 00:39:33 2013] source mask rpix=2.3, npix_max = 30, mask sum = 17, frac = 0.555
[Thu Jun 13 00:39:33 2013] Giving source the simple spatial ID 7 for pass 1, mean size = 9.86"
[Thu Jun 13 00:39:33 2013] fullrun_mos1_xmm0679181201_pi300-10000_cl_pass1_src7.ximg exists
[Thu Jun 13 00:39:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679181201_pi300-10000_cl_pass1_src7.csv
[Thu Jun 13 00:39:33 2013] fullrun_mos1_xmm0679181201_pi300-10000_cl_pass1_src7_1.ximg exists
[Thu Jun 13 00:39:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679181201_pi300-10000_cl_pass1_src7.csv
[Thu Jun 13 00:39:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0679181201_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0679181201_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 00:39:33 2013] fullrun_mos1_xmm0679181201_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Thu Jun 13 00:39:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679181201_pi300-10000_cl_pass1_tfrozen_src7.csv
[Thu Jun 13 00:39:33 2013] fullrun_mos1_xmm0679181201_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Thu Jun 13 00:39:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679181201_pi300-10000_cl_pass1_tfrozen_src7.csv
[Thu Jun 13 00:39:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0679181201_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0679181201_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 00:39:43 2013] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 18.010005 pixels away
[Thu Jun 13 00:39:43 2013] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 39.686387 pixels away
[Thu Jun 13 00:39:43 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 00:39:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 00:39:43 2013] Assessing source extent using major
[Thu Jun 13 00:39:43 2013] Source does appear to be extended
[Thu Jun 13 00:39:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 00:39:57 2013] XMMSAS src. selection expression = ellipse(33856.534760, 23753.808441, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 13 00:39:57 2013] Not overwriting source region fullrun_mos1_xmm0679181201_pi300-10000_pass1_cl_src12_src.reg
[Thu Jun 13 00:39:57 2013] Extracting stamp from image fullrun_mos1_xmm0679181201_pi300-10000_cl_sm2.00.img.gz, (352, 236) - (427, 311)
[Thu Jun 13 00:39:57 2013] XMMSAS bgd. selection expression = annulus(33856.534760, 23753.808441, 1087.500000, 2175.000000, X, Y)
[Thu Jun 13 00:39:57 2013] Writing fullrun_mos1_xmm0679181201_pi300-10000_pass1_cl_src12.gif
[Thu Jun 13 00:39:57 2013] ../../xmm0679181201/products/events/fullrun_mos1_xmm0679181201_pi300-10000_pass1_cl_src12_src.evt and ../../xmm0679181201/products/events/fullrun_mos1_xmm0679181201_pi300-10000_pass1_cl_src12_bgd.evt exist, delete to re-create
[Thu Jun 13 00:39:57 2013] Mean detx,y = (-1001.70, 6892.19) 
[Thu Jun 13 00:39:57 2013] ../../xmm0679181201/products/images/fullrun_mos1_xmm0679181201_pi300-10000_pass1_cl_src12_src.img and ../../xmm0679181201/products/images/fullrun_mos1_xmm0679181201_pi300-10000_pass1_cl_src12_bgd.img exist, delete to re-create
[Thu Jun 13 00:39:57 2013] ../../xmm0679181201/products/spectra/fullrun_mos1_xmm0679181201_pi300-10000_pass1_cl_src12_src_b10.pi.gz and ../../xmm0679181201/products/spectra/fullrun_mos1_xmm0679181201_pi300-10000_pass1_cl_src12_bgd.pi exist, delete to re-create
[Thu Jun 13 00:39:57 2013] Setting source spectrum file to fullrun_mos1_xmm0679181201_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Thu Jun 13 00:39:57 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0679181201_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Thu Jun 13 00:39:57 2013] ../../xmm0679181201/products/lightcurves/fullrun_mos1_xmm0679181201_pi300-10000_pass1_cl_src12_src.lc and ../../xmm0679181201/products/lightcurves/fullrun_mos1_xmm0679181201_pi300-10000_pass1_cl_src12_bgd.lc exist, delete to re-create
[Thu Jun 13 00:39:59 2013] Not generating rmf since there are only 32 counts
[Thu Jun 13 00:39:59 2013] rmf not generated due to insufficient counts
[Thu Jun 13 00:39:59 2013] fullrun_mos1_xmm0679181201_pi300-10000_pass1_cl_src12.arf exists, delete to re-create
[Thu Jun 13 00:44:24 2013] Updating aperture counts using extracted products
[Thu Jun 13 00:44:25 2013] Total counts from fullrun_mos1_xmm0679181201_pi300-10000_pass1_cl_src12_src_b10.pi.gz = 54.00
[Thu Jun 13 00:44:25 2013] Total counts from fullrun_mos1_xmm0679181201_pi300-10000_pass1_cl_src12_bgd.pi.gz = 233.00
[Thu Jun 13 00:44:25 2013] Got source and background scale factors 1057752.000000, 9180218.000000
[Thu Jun 13 00:44:25 2013] User source parameters:
  Position = (389.7, 273.6) = 21 0 14.31 -33 9 24.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 27.2 +/- 8.4
  Background aperture counts = 26.8
  Rate = 0.002 +/- 0.0006

[Thu Jun 13 00:44:25 2013] Updating counts from extracted products
[Thu Jun 13 00:44:25 2013] Set source signif. to 27.15/5.18 = 5.24
[Thu Jun 13 00:44:27 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 13 00:44:27 2013] Using photon index=1.80, rate=0.00195, arf fullrun_mos1_xmm0679181201_pi300-10000_pass1_cl_src12.arf
[Thu Jun 13 00:44:27 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 13 00:44:27 2013] Updating source flux to 2.8e-14
[Thu Jun 13 00:44:32 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 13 00:44:34 2013] xmm0679181201/analysis//spectral/fullrun_mos1_xmm0679181201_pi300-10000_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete