[Thu Jun 13 00:38:54 2013] Detection parameters:
  Position = (326.0, 313.7) = 21 0 36.38 -33 6 32.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 41.9 +/- 8.7
  Background counts = 5.0
  Rate = 0.003 +/- 0.0007

[Thu Jun 13 00:38:54 2013] Off-axis axis estimate = 2.28'
[Thu Jun 13 00:39:11 2013] Using EEF radius (= 7.57 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 00:39:11 2013] Initial guess for spatial extent in simple fitting = 7.57"
[Thu Jun 13 00:39:11 2013] source mask rpix=1.7, npix_max = 20, mask sum = 14, frac = 0.697
[Thu Jun 13 00:39:11 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 7.57"
[Thu Jun 13 00:39:12 2013] fullrun_mos1_xmm0679181201_pi300-10000_cl_pass0_src8.ximg exists
[Thu Jun 13 00:39:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679181201_pi300-10000_cl_pass0_src8.csv
[Thu Jun 13 00:39:12 2013] fullrun_mos1_xmm0679181201_pi300-10000_cl_pass0_src8_1.ximg exists
[Thu Jun 13 00:39:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679181201_pi300-10000_cl_pass0_src8.csv
[Thu Jun 13 00:39:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0679181201_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0679181201_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 00:39:12 2013] fullrun_mos1_xmm0679181201_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Thu Jun 13 00:39:12 2013] fullrun_mos1_xmm0679181201_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Thu Jun 13 00:39:12 2013] Fit fullrun_mos1_xmm0679181201_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Thu Jun 13 00:39:21 2013] Spatial fit model total counts = 147.609000, observed total counts = 134.000000
[Thu Jun 13 00:39:21 2013] Poor agreement between spatial fit and data for source 10
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 13 00:39:21 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 00:39:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 00:39:21 2013] Assessing source extent using major
[Thu Jun 13 00:39:21 2013] Source does appear to be extended
[Thu Jun 13 00:39:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 00:39:33 2013] Using EEF radius (= 7.57 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 00:39:33 2013] Initial guess for spatial extent in simple fitting = 7.57"
[Thu Jun 13 00:39:33 2013] source mask rpix=1.7, npix_max = 20, mask sum = 14, frac = 0.697
[Thu Jun 13 00:39:33 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 7.57"
[Thu Jun 13 00:39:33 2013] fullrun_mos1_xmm0679181201_pi300-10000_cl_pass1_src8.ximg exists
[Thu Jun 13 00:39:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679181201_pi300-10000_cl_pass1_src8.csv
[Thu Jun 13 00:39:33 2013] fullrun_mos1_xmm0679181201_pi300-10000_cl_pass1_src8_1.ximg exists
[Thu Jun 13 00:39:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679181201_pi300-10000_cl_pass1_src8.csv
[Thu Jun 13 00:39:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0679181201_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0679181201_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 00:39:33 2013] fullrun_mos1_xmm0679181201_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Thu Jun 13 00:39:33 2013] fullrun_mos1_xmm0679181201_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Thu Jun 13 00:39:33 2013] Fit fullrun_mos1_xmm0679181201_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Thu Jun 13 00:39:43 2013] Spatial fit model total counts = 147.571000, observed total counts = 134.000000
[Thu Jun 13 00:39:43 2013] Poor agreement between spatial fit and data for source 10
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 13 00:39:43 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 00:39:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 00:39:43 2013] Assessing source extent using major
[Thu Jun 13 00:39:43 2013] Source does appear to be extended
[Thu Jun 13 00:39:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 00:39:57 2013] XMMSAS src. selection expression = ellipse(28314.960266, 27241.433685, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 13 00:39:57 2013] Not overwriting source region fullrun_mos1_xmm0679181201_pi300-10000_pass1_cl_src10_src.reg
[Thu Jun 13 00:39:57 2013] Extracting stamp from image fullrun_mos1_xmm0679181201_pi300-10000_cl_sm2.00.img.gz, (289, 276) - (364, 351)
[Thu Jun 13 00:39:57 2013] XMMSAS bgd. selection expression = annulus(28314.960266, 27241.433685, 1087.500000, 2175.000000, X, Y) && !ellipse(27975.979880, 25676.870000, 1573.704045, 1573.704045, 0.000000, X, Y) && !ellipse(28510.327800, 28008.302800, 480.596014, 480.596014, 0.000000, X, Y) && !ellipse(28027.111400, 26283.616000, 1171.960034, 1171.960034, 0.000000, X, Y)
[Thu Jun 13 00:39:57 2013] Writing fullrun_mos1_xmm0679181201_pi300-10000_pass1_cl_src10.gif
[Thu Jun 13 00:39:57 2013] ../../xmm0679181201/products/events/fullrun_mos1_xmm0679181201_pi300-10000_pass1_cl_src10_src.evt and ../../xmm0679181201/products/events/fullrun_mos1_xmm0679181201_pi300-10000_pass1_cl_src10_bgd.evt exist, delete to re-create
[Thu Jun 13 00:39:57 2013] Mean detx,y = (626.52, 511.94) 
[Thu Jun 13 00:39:57 2013] ../../xmm0679181201/products/images/fullrun_mos1_xmm0679181201_pi300-10000_pass1_cl_src10_src.img and ../../xmm0679181201/products/images/fullrun_mos1_xmm0679181201_pi300-10000_pass1_cl_src10_bgd.img exist, delete to re-create
[Thu Jun 13 00:39:57 2013] ../../xmm0679181201/products/spectra/fullrun_mos1_xmm0679181201_pi300-10000_pass1_cl_src10_src_b10.pi.gz and ../../xmm0679181201/products/spectra/fullrun_mos1_xmm0679181201_pi300-10000_pass1_cl_src10_bgd.pi exist, delete to re-create
[Thu Jun 13 00:39:57 2013] Setting source spectrum file to fullrun_mos1_xmm0679181201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Thu Jun 13 00:39:57 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0679181201_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Thu Jun 13 00:39:57 2013] ../../xmm0679181201/products/lightcurves/fullrun_mos1_xmm0679181201_pi300-10000_pass1_cl_src10_src.lc and ../../xmm0679181201/products/lightcurves/fullrun_mos1_xmm0679181201_pi300-10000_pass1_cl_src10_bgd.lc exist, delete to re-create
[Thu Jun 13 00:39:59 2013] Not generating rmf since there are only 41 counts
[Thu Jun 13 00:39:59 2013] rmf not generated due to insufficient counts
[Thu Jun 13 00:39:59 2013] fullrun_mos1_xmm0679181201_pi300-10000_pass1_cl_src10.arf exists, delete to re-create
[Thu Jun 13 00:44:25 2013] Updating aperture counts using extracted products
[Thu Jun 13 00:44:25 2013] Total counts from fullrun_mos1_xmm0679181201_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 88.00
[Thu Jun 13 00:44:25 2013] Total counts from fullrun_mos1_xmm0679181201_pi300-10000_pass1_cl_src10_bgd.pi.gz = 229.00
[Thu Jun 13 00:44:25 2013] Got source and background scale factors 1264288.000000, 7148960.000000
[Thu Jun 13 00:44:25 2013] User source parameters:
  Position = (326.0, 313.7) = 21 0 36.38 -33 6 32.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 47.5 +/- 10.4
  Background aperture counts = 40.5
  Rate = 0.003 +/- 0.0007

[Thu Jun 13 00:44:25 2013] Updating counts from extracted products
[Thu Jun 13 00:44:25 2013] Set source signif. to 47.50/6.36 = 7.46
[Thu Jun 13 00:44:27 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 13 00:44:27 2013] Using photon index=1.80, rate=0.00341, arf fullrun_mos1_xmm0679181201_pi300-10000_pass1_cl_src10.arf
[Thu Jun 13 00:44:27 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 13 00:44:27 2013] Updating source flux to 3.6e-14
[Thu Jun 13 00:44:32 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 13 00:44:34 2013] xmm0679181201/analysis//spectral/fullrun_mos1_xmm0679181201_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete