[Tue Aug 28 00:29:45 2012] Detection parameters:
  Position = (282.2, 292.3) = 4 46 47.40 -37 4 36.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 34.5 +/- 9.2
  Background counts = 8.6
  Rate = 0.002 +/- 0.0006

[Tue Aug 28 00:29:45 2012] Off-axis axis estimate = 1.25'
[Tue Aug 28 01:56:59 2012] Using EEF radius (= 7.06 ")to estimate initial spatial extent for simple fitting
[Tue Aug 28 01:56:59 2012] Initial guess for spatial extent in simple fitting = 7.06"
[Tue Aug 28 01:56:59 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.888
[Tue Aug 28 01:56:59 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 7.06"
[Tue Aug 28 02:42:23 2012] fullrun_mos2_xmm0679181001_pi300-10000_cl_pass0_src27.ximg exists
[Tue Aug 28 02:42:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0679181001_pi300-10000_cl_pass0_src27.csv
[Tue Aug 28 02:42:23 2012] fullrun_mos2_xmm0679181001_pi300-10000_cl_pass0_src27_1.ximg exists
[Tue Aug 28 02:42:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0679181001_pi300-10000_cl_pass0_src27.csv
[Tue Aug 28 02:42:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0679181001_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0679181001_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 02:42:23 2012] fullrun_mos2_xmm0679181001_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Tue Aug 28 02:42:23 2012] fullrun_mos2_xmm0679181001_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Tue Aug 28 02:42:23 2012] Fit fullrun_mos2_xmm0679181001_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Tue Aug 28 02:42:37 2012] Source 25 is offset by -1.327051 and -7.172167 pixels which is larger than
2 X fitted extent = 4.077835 x 4.077835, not incorporating fit results
[Tue Aug 28 02:42:37 2012] Source 25 is offset by 6.352999 and 1.212339 pixels which is larger than
2 X fitted extent = 0.862037 x 0.862037, not incorporating fit results
[Tue Aug 28 02:42:37 2012] Vigneting correction estimate = 1.000000
[Tue Aug 28 02:42:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 28 02:42:37 2012] Assessing source extent using major
[Tue Aug 28 02:42:37 2012] Source does appear to be extended
[Tue Aug 28 02:42:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 28 04:09:18 2012] Using EEF radius (= 7.06 ")to estimate initial spatial extent for simple fitting
[Tue Aug 28 04:09:18 2012] Initial guess for spatial extent in simple fitting = 7.06"
[Tue Aug 28 04:09:18 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.888
[Tue Aug 28 04:09:18 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 7.06"
[Tue Aug 28 04:57:44 2012] fullrun_mos2_xmm0679181001_pi300-10000_cl_pass1_src25.ximg exists
[Tue Aug 28 04:57:44 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0679181001_pi300-10000_cl_pass1_src25.csv
[Tue Aug 28 04:57:44 2012] fullrun_mos2_xmm0679181001_pi300-10000_cl_pass1_src25_1.ximg exists
[Tue Aug 28 04:57:44 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0679181001_pi300-10000_cl_pass1_src25.csv
[Tue Aug 28 04:57:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0679181001_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0679181001_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 04:57:44 2012] fullrun_mos2_xmm0679181001_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Tue Aug 28 04:57:44 2012] fullrun_mos2_xmm0679181001_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Tue Aug 28 04:57:44 2012] Fit fullrun_mos2_xmm0679181001_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Tue Aug 28 04:58:01 2012] Warning, spatial fit 25 centroid is now closest to src. 2
[Tue Aug 28 04:58:01 2012] Vigneting correction estimate = 1.000000
[Tue Aug 28 04:58:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 28 04:58:01 2012] Assessing source extent using major
[Tue Aug 28 04:58:01 2012] Source does appear to be extended
[Tue Aug 28 04:58:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 28 04:58:01 2012] Source is confused with source 2
[Tue Aug 28 05:21:51 2012] XMMSAS src. selection expression = ellipse(24507.188934, 25382.995483, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Aug 28 05:21:51 2012] Writing source region out to fullrun_mos2_xmm0679181001_pi300-10000_pass1_cl_src25_src.reg
[Tue Aug 28 05:21:51 2012] Extracting stamp from image fullrun_mos2_xmm0679181001_pi300-10000_cl_sm2.00.img.gz, (245, 255) - (320, 330)
[Tue Aug 28 05:21:51 2012] XMMSAS bgd. selection expression = annulus(24507.188934, 25382.995483, 1087.500000, 2175.000000, X, Y) && !ellipse(24619.477600, 26006.974000, 684.491220, 684.491220, 0.000000, X, Y) && !ellipse(23949.640000, 26219.308000, 688.766420, 688.766420, 0.000000, X, Y) && !ellipse(25256.613434, 25888.428101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26770.085400, 24901.057400, 299.524009, 299.524009, 0.000000, X, Y) && !ellipse(26887.499200, 26436.108800, 291.832008, 291.832008, 0.000000, X, Y) && !ellipse(24218.629730, 27219.025238, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22389.151040, 23641.245200, 286.896008, 286.896008, 0.000000, X, Y) && !ellipse(23501.493042, 26654.226166, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23346.057007, 25832.807892, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Aug 28 05:21:51 2012] Writing fullrun_mos2_xmm0679181001_pi300-10000_pass1_cl_src25.gif
[Tue Aug 28 05:26:05 2012] Mean detx,y = (47.88, -730.99) 
[Tue Aug 28 05:26:06 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 28 05:26:13 2012] grppha failed
[Tue Aug 28 05:26:13 2012] Setting source spectrum file to fullrun_mos2_xmm0679181001_pi300-10000_pass1_cl_src25_src.pi.gz
[Tue Aug 28 05:26:13 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0679181001_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Tue Aug 28 05:26:45 2012] Not generating rmf since there are only 34 counts
[Tue Aug 28 05:26:45 2012] rmf not generated due to insufficient counts
[Tue Aug 28 05:27:01 2012] Updating aperture counts using extracted products
[Tue Aug 28 05:27:01 2012] Error reading totcts from fullrun_mos2_xmm0679181001_pi300-10000_pass1_cl_src25_src.pi.gz
[Tue Aug 28 05:27:01 2012] No arf file for this source, not re-computing flux
[Tue Aug 28 05:27:03 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Aug 28 05:27:04 2012] xmm0679181001/analysis//spectral/fullrun_mos2_xmm0679181001_pi300-10000_pass1_cl_src25_pl.csv not found, spectral fit skipped or did not complete