[Tue Aug 28 00:29:21 2012] Detection parameters:
  Position = (284.1, 292.6) = 4 46 46.73 -37 4 33.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 35.1 +/- 9.1
  Background counts = 8.3
  Rate = 0.002 +/- 0.0006

[Tue Aug 28 00:29:21 2012] Off-axis axis estimate = 1.12'
[Tue Aug 28 01:17:25 2012] Using EEF radius (= 6.99 ")to estimate initial spatial extent for simple fitting
[Tue Aug 28 01:17:25 2012] Initial guess for spatial extent in simple fitting = 6.99"
[Tue Aug 28 01:17:25 2012] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.126
[Tue Aug 28 01:17:25 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 6.99"
[Tue Aug 28 01:56:59 2012] fullrun_mos1_xmm0679181001_pi300-10000_cl_pass0_src21.ximg exists
[Tue Aug 28 01:56:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679181001_pi300-10000_cl_pass0_src21.csv
[Tue Aug 28 01:56:59 2012] fullrun_mos1_xmm0679181001_pi300-10000_cl_pass0_src21_1.ximg exists
[Tue Aug 28 01:56:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679181001_pi300-10000_cl_pass0_src21.csv
[Tue Aug 28 01:56:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0679181001_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0679181001_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 01:56:59 2012] fullrun_mos1_xmm0679181001_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Tue Aug 28 01:56:59 2012] fullrun_mos1_xmm0679181001_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Tue Aug 28 01:56:59 2012] Fit fullrun_mos1_xmm0679181001_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Tue Aug 28 02:42:33 2012] Source 15 is offset by 2.587011 and -6.840040 pixels which is larger than
2 X fitted extent = 6.427724 x 6.427724, not incorporating fit results
[Tue Aug 28 02:42:33 2012] Vigneting correction estimate = 1.000000
[Tue Aug 28 02:42:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 28 02:42:33 2012] Assessing source extent using major
[Tue Aug 28 02:42:33 2012] Source does appear to be extended
[Tue Aug 28 02:42:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 28 02:42:33 2012] Source is confused with source 11
[Tue Aug 28 03:28:15 2012] Using EEF radius (= 6.99 ")to estimate initial spatial extent for simple fitting
[Tue Aug 28 03:28:15 2012] Initial guess for spatial extent in simple fitting = 6.99"
[Tue Aug 28 03:28:15 2012] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.126
[Tue Aug 28 03:28:15 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 6.99"
[Tue Aug 28 04:09:18 2012] fullrun_mos1_xmm0679181001_pi300-10000_cl_pass1_src20.ximg exists
[Tue Aug 28 04:09:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679181001_pi300-10000_cl_pass1_src20.csv
[Tue Aug 28 04:09:18 2012] fullrun_mos1_xmm0679181001_pi300-10000_cl_pass1_src20_1.ximg exists
[Tue Aug 28 04:09:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679181001_pi300-10000_cl_pass1_src20.csv
[Tue Aug 28 04:09:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0679181001_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0679181001_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 04:09:18 2012] fullrun_mos1_xmm0679181001_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Tue Aug 28 04:09:18 2012] fullrun_mos1_xmm0679181001_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Tue Aug 28 04:09:18 2012] Fit fullrun_mos1_xmm0679181001_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Tue Aug 28 04:57:56 2012] Source 15 is offset by -7.045932 and 2.724673 pixels which is larger than
2 X fitted extent = 1.704621 x 1.704621, not incorporating fit results
[Tue Aug 28 04:57:56 2012] Source 15 is offset by 2.540505 and -6.840040 pixels which is larger than
2 X fitted extent = 6.427724 x 6.427724, not incorporating fit results
[Tue Aug 28 04:57:56 2012] Vigneting correction estimate = 1.000000
[Tue Aug 28 04:57:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 28 04:57:56 2012] Assessing source extent using major
[Tue Aug 28 04:57:56 2012] Source does appear to be extended
[Tue Aug 28 04:57:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 28 05:17:15 2012] XMMSAS src. selection expression = ellipse(24667.419952, 25406.630554, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Aug 28 05:17:15 2012] Writing source region out to fullrun_mos1_xmm0679181001_pi300-10000_pass1_cl_src15_src.reg
[Tue Aug 28 05:17:15 2012] Extracting stamp from image fullrun_mos1_xmm0679181001_pi300-10000_cl_sm2.00.img.gz, (247, 255) - (322, 330)
[Tue Aug 28 05:17:15 2012] XMMSAS bgd. selection expression = annulus(24667.419952, 25406.630554, 1087.500000, 2175.000000, X, Y) && !ellipse(24613.544400, 26410.152800, 905.464026, 905.464026, 0.409239, X, Y) && !ellipse(24111.164000, 26296.539000, 1186.416034, 1186.416034, 0.000000, X, Y) && !ellipse(22415.684020, 27105.421200, 396.466411, 267.363208, 104.414000, X, Y) && !ellipse(26816.316560, 24924.242400, 431.446412, 431.446412, 0.000000, X, Y) && !ellipse(23754.656000, 26125.896000, 1650.688047, 1599.984046, 358.515899, X, Y) && !ellipse(22380.118082, 23622.298877, 437.190544, 212.638699, 334.200718, X, Y) && !ellipse(26853.206365, 26435.987595, 449.239252, 323.523693, 64.536460, X, Y) && !ellipse(23113.269348, 26311.618530, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Aug 28 05:17:15 2012] Writing fullrun_mos1_xmm0679181001_pi300-10000_pass1_cl_src15.gif
[Tue Aug 28 05:20:37 2012] Mean detx,y = (-610.44, -274.71) 
[Tue Aug 28 05:20:38 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 28 05:20:46 2012] grppha failed
[Tue Aug 28 05:20:46 2012] Setting source spectrum file to fullrun_mos1_xmm0679181001_pi300-10000_pass1_cl_src15_src.pi.gz
[Tue Aug 28 05:20:46 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0679181001_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Tue Aug 28 05:21:50 2012] Not generating rmf since there are only 35 counts
[Tue Aug 28 05:21:50 2012] rmf not generated due to insufficient counts
[Tue Aug 28 05:27:00 2012] Updating aperture counts using extracted products
[Tue Aug 28 05:27:00 2012] Error reading totcts from fullrun_mos1_xmm0679181001_pi300-10000_pass1_cl_src15_src.pi.gz
[Tue Aug 28 05:27:00 2012] No arf file for this source, not re-computing flux
[Tue Aug 28 05:27:02 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Aug 28 05:27:03 2012] xmm0679181001/analysis//spectral/fullrun_mos1_xmm0679181001_pi300-10000_pass1_cl_src15_pl.csv not found, spectral fit skipped or did not complete