[Thu Jul 26 07:07:58 2012] Detection parameters:
  Position = (442.8, 300.9) = 13 23 47.20 -35 15 2.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 313.7 +/- 21.5
  Background counts = 6.8
  Rate = 0.03 +/- 0.002

[Thu Jul 26 07:07:59 2012] Off-axis axis estimate = 10.47'
[Thu Jul 26 07:54:10 2012] Using EEF radius (= 11.66 ")to estimate initial spatial extent for simple fitting
[Thu Jul 26 07:54:10 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jul 26 07:54:10 2012] Initial guess for spatial extent in simple fitting = 11.66"
[Thu Jul 26 07:54:10 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.889
[Thu Jul 26 07:54:10 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.66"
[Thu Jul 26 08:15:20 2012] fullrun_mos2_xmm0679180901_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jul 26 08:15:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0679180901_pi300-10000_cl_pass0_src1.csv
[Thu Jul 26 08:15:20 2012] fullrun_mos2_xmm0679180901_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jul 26 08:15:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0679180901_pi300-10000_cl_pass0_src1.csv
[Thu Jul 26 08:15:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0679180901_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0679180901_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 08:15:21 2012] fullrun_mos2_xmm0679180901_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jul 26 08:15:21 2012] fullrun_mos2_xmm0679180901_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jul 26 08:15:21 2012] Fit fullrun_mos2_xmm0679180901_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Jul 26 08:15:29 2012] Spatial fit model total counts = 411.701000, observed total counts = 410.000000
[Thu Jul 26 08:15:29 2012] Offset between fit and detection position for source 1 = 0.227590 pixels
[Thu Jul 26 08:15:29 2012] 412.252000 total counts/ 192.441000 bgd. counts: snr = 15.845306
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.227590 pixels
  Position = (442.6, 300.8) = 13 23 47.28 -35 15 2.0
  Extent = 5.8 (5.2-6.5)", rotation angle = 0
  Source counts = 219.8 +/- 20.3
  Background counts = 192.4
  Rate = 0.01 +/- 0.001
[Thu Jul 26 08:15:29 2012] Vigneting correction estimate = 1.000000
[Thu Jul 26 08:15:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 26 08:15:29 2012] Assessing source extent using major axis lower bound
[Thu Jul 26 08:15:29 2012] Source does appear to be extended
[Thu Jul 26 08:15:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 26 08:55:54 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jul 26 08:55:54 2012] Initial guess for spatial extent in simple fitting = 5.78"
[Thu Jul 26 08:55:54 2012] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.897
[Thu Jul 26 08:55:54 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.78"
[Thu Jul 26 09:17:29 2012] fullrun_mos2_xmm0679180901_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jul 26 09:17:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0679180901_pi300-10000_cl_pass1_src1.csv
[Thu Jul 26 09:17:29 2012] fullrun_mos2_xmm0679180901_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jul 26 09:17:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0679180901_pi300-10000_cl_pass1_src1.csv
[Thu Jul 26 09:17:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0679180901_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0679180901_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 09:17:30 2012] fullrun_mos2_xmm0679180901_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jul 26 09:17:30 2012] fullrun_mos2_xmm0679180901_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jul 26 09:17:30 2012] Fit fullrun_mos2_xmm0679180901_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Jul 26 09:17:40 2012] Spatial fit model total counts = 333.000000, observed total counts = 333.000000
[Thu Jul 26 09:17:40 2012] Offset between fit and detection position for source 1 = 0.011028 pixels
[Thu Jul 26 09:17:40 2012] 334.741000 total counts/ 117.475000 bgd. counts: snr = 20.045599
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.011028 pixels
  Position = (442.6, 300.8) = 13 23 47.28 -35 15 2.1
  Extent = 5.7 (5.1-6.5)", rotation angle = 0
  Source counts = 217.3 +/- 18.3
  Background counts = 117.5
  Rate = 0.01 +/- 0.001
[Thu Jul 26 09:17:40 2012] Vigneting correction estimate = 1.000000
[Thu Jul 26 09:17:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 26 09:17:40 2012] Assessing source extent using major axis lower bound
[Thu Jul 26 09:17:40 2012] Source does appear to be extended
[Thu Jul 26 09:17:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 26 09:42:59 2012] XMMSAS src. selection expression = ellipse(38454.243800, 26122.531600, 341.490610, 341.490610, 0.000000, X, Y)
[Thu Jul 26 09:42:59 2012] Writing source region out to fullrun_mos2_xmm0679180901_pi300-10000_pass1_cl_src1_src.reg
[Thu Jul 26 09:42:59 2012] Extracting stamp from image fullrun_mos2_xmm0679180901_pi300-10000_cl_sm2.00.img.gz, (423, 281) - (462, 320)
[Thu Jul 26 09:42:59 2012] XMMSAS bgd. selection expression = annulus(38454.243800, 26122.531600, 569.151016, 1138.302033, X, Y)
[Thu Jul 26 09:42:59 2012] Writing fullrun_mos2_xmm0679180901_pi300-10000_pass1_cl_src1.gif
[Thu Jul 26 09:43:01 2012] Mean detx,y = (-9619.89, -7996.09) 
[Thu Jul 26 09:43:02 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 26 09:43:09 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 26 09:43:09 2012] Setting source spectrum file to fullrun_mos2_xmm0679180901_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jul 26 09:43:09 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0679180901_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Jul 26 09:51:05 2012] Updating aperture counts using extracted products
[Thu Jul 26 09:51:05 2012] Error reading totcts from fullrun_mos2_xmm0679180901_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jul 26 09:51:05 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 26 09:51:05 2012] Using photon index=1.80, rate=0.0113, arf fullrun_mos2_xmm0679180901_pi300-10000_pass1_cl_src1.arf
[Thu Jul 26 09:51:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 26 09:51:05 2012] Updating source flux to 2.8e-13
[Thu Jul 26 09:51:17 2012] Reading fit data from xmm0679180901/analysis//spectral/fullrun_mos2_xmm0679180901_pi300-10000_pass1_cl_src1_pl.csv
[Thu Jul 26 09:51:17 2012] Spectral fit parameter nH value = 5.96044e+20
[Thu Jul 26 09:51:17 2012] Spectral fit parameter PhoIndex value = 1.74414
[Thu Jul 26 09:51:17 2012] Failed to get F(0.3-8.0) from xmm0679180901/analysis//spectral/fullrun_mos2_xmm0679180901_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Jul 26 09:51:17 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 26 09:51:17 2012] Using Nh = 6e+20, photon index=1.74, rate=0.0113, arf fullrun_mos2_xmm0679180901_pi300-10000_pass1_cl_src1.arf
[Thu Jul 26 09:51:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 26 09:51:17 2012] Updating source flux to 3.1e-13