[Thu Jul 26 07:07:38 2012] Detection parameters:
  Position = (422.8, 443.3) = 13 23 54.37 -35 4 42.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 29.5 +/- 7.8
  Background counts = 8.1
  Rate = 0.002 +/- 0.0004

[Thu Jul 26 07:07:38 2012] Off-axis axis estimate = 13.85'
[Thu Jul 26 07:34:17 2012] Using EEF radius (= 13.35 ")to estimate initial spatial extent for simple fitting
[Thu Jul 26 07:34:17 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jul 26 07:34:17 2012] Initial guess for spatial extent in simple fitting = 13.35"
[Thu Jul 26 07:34:17 2012] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.962
[Thu Jul 26 07:34:17 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 13.35"
[Thu Jul 26 07:54:09 2012] fullrun_mos1_xmm0679180901_pi300-10000_cl_pass0_src13.ximg exists
[Thu Jul 26 07:54:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679180901_pi300-10000_cl_pass0_src13.csv
[Thu Jul 26 07:54:09 2012] fullrun_mos1_xmm0679180901_pi300-10000_cl_pass0_src13_1.ximg exists
[Thu Jul 26 07:54:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679180901_pi300-10000_cl_pass0_src13.csv
[Thu Jul 26 07:54:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0679180901_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0679180901_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 07:54:09 2012] fullrun_mos1_xmm0679180901_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Thu Jul 26 07:54:09 2012] fullrun_mos1_xmm0679180901_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Thu Jul 26 07:54:10 2012] Fit fullrun_mos1_xmm0679180901_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Thu Jul 26 08:15:27 2012] Spatial fit model total counts = 143.280000, observed total counts = 143.000000
[Thu Jul 26 08:15:27 2012] Offset between fit and detection position for source 10 = 0.727312 pixels
[Thu Jul 26 08:15:27 2012] 141.035600 total counts/ 124.306000 bgd. counts: snr = 1.500512
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.727312 pixels
  Position = (422.1, 443.5) = 13 23 54.63 -35 4 41.6
  Extent = 4.2 (3.3-6.8)", rotation angle = 0
  Source counts = 16.7 +/- 11.9
  Background counts = 124.3
  Rate = 0.0009 +/- 0.0006
  Deleting source due to low Poisson probability