[Fri Jul 20 22:05:37 2012] Detection parameters:
  Position = (289.2, 278.9) = 1 30 50.89 45 15 59.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 38.2 +/- 10.1
  Background counts = 16.6
  Rate = 0.005 +/- 0.001

[Fri Jul 20 22:05:37 2012] Off-axis axis estimate = 1.57'
[Fri Jul 20 22:07:14 2012] Using EEF radius (= 7.21 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 22:07:14 2012] Initial guess for spatial extent in simple fitting = 7.21"
[Fri Jul 20 22:07:14 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.859
[Fri Jul 20 22:07:14 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 7.21"
[Fri Jul 20 23:34:24 2012] fullrun_pn_xmm0679180801_pi300-10000_cl_pass0_src30.ximg exists
[Fri Jul 20 23:34:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0679180801_pi300-10000_cl_pass0_src30.csv
[Fri Jul 20 23:34:24 2012] fullrun_pn_xmm0679180801_pi300-10000_cl_pass0_src30_1.ximg exists
[Fri Jul 20 23:34:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0679180801_pi300-10000_cl_pass0_src30.csv
[Fri Jul 20 23:34:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0679180801_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0679180801_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 23:34:25 2012] fullrun_pn_xmm0679180801_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Fri Jul 20 23:34:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0679180801_pi300-10000_cl_pass0_tfrozen_src30.csv
[Fri Jul 20 23:34:25 2012] fullrun_pn_xmm0679180801_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Fri Jul 20 23:34:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0679180801_pi300-10000_cl_pass0_tfrozen_src30.csv
[Fri Jul 20 23:34:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0679180801_pi300-10000_cl_pass0_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0679180801_pi300-10000_cl_pass0_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 01:55:49 2012] Warning: source 29 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 30 at 14.948418 pixels away
[Sat Jul 21 01:55:49 2012] Source 30 is offset by 4.401602 and 6.488534 pixels which is larger than
2 X fitted extent = 0.829140 x 0.829140, not incorporating fit results
[Sat Jul 21 01:55:49 2012] Vigneting correction estimate = 1.000000
[Sat Jul 21 01:55:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 21 01:55:49 2012] Assessing source extent using major
[Sat Jul 21 01:55:49 2012] Source does appear to be extended
[Sat Jul 21 01:55:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 01:55:49 2012] Deleting source due to low Poisson probability 0.9