[Fri Jul 20 22:05:59 2012] Detection parameters:
  Position = (298.5, 305.1) = 1 30 47.06 45 17 50.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 53.8 +/- 11.0
  Background counts = 12.3
  Rate = 0.004 +/- 0.0009

[Fri Jul 20 22:06:00 2012] Off-axis axis estimate = 0.48'
[Fri Jul 20 23:34:25 2012] Using EEF radius (= 6.67 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 23:34:25 2012] Initial guess for spatial extent in simple fitting = 6.67"
[Fri Jul 20 23:34:25 2012] source mask rpix=1.5, npix_max = 16, mask sum = 20, frac = 1.210
[Fri Jul 20 23:34:25 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 6.67"
[Sat Jul 21 00:25:04 2012] fullrun_mos1_xmm0679180801_pi300-10000_cl_pass0_src11.ximg exists
[Sat Jul 21 00:25:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679180801_pi300-10000_cl_pass0_src11.csv
[Sat Jul 21 00:25:04 2012] fullrun_mos1_xmm0679180801_pi300-10000_cl_pass0_src11_1.ximg exists
[Sat Jul 21 00:25:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679180801_pi300-10000_cl_pass0_src11.csv
[Sat Jul 21 00:25:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0679180801_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0679180801_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 00:25:04 2012] fullrun_mos1_xmm0679180801_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sat Jul 21 00:25:04 2012] fullrun_mos1_xmm0679180801_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sat Jul 21 00:25:04 2012] Fit fullrun_mos1_xmm0679180801_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Sat Jul 21 01:55:53 2012] Source 13 is offset by 6.019602 and 0.348830 pixels which is larger than
2 X fitted extent = 0.806602 x 0.806602, not incorporating fit results
[Sat Jul 21 01:55:53 2012] Warning, spatial fit 11 centroid is now closest to src. 11
[Sat Jul 21 01:55:53 2012] Vigneting correction estimate = 1.000000
[Sat Jul 21 01:55:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 21 01:55:53 2012] Assessing source extent using major
[Sat Jul 21 01:55:53 2012] Source does appear to be extended
[Sat Jul 21 01:55:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 01:55:53 2012] Source is confused with source 12
[Sat Jul 21 02:57:52 2012] Using EEF radius (= 6.67 ")to estimate initial spatial extent for simple fitting
[Sat Jul 21 02:57:52 2012] Initial guess for spatial extent in simple fitting = 6.67"
[Sat Jul 21 02:57:52 2012] source mask rpix=1.5, npix_max = 16, mask sum = 20, frac = 1.210
[Sat Jul 21 02:57:52 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 6.67"
[Sat Jul 21 03:55:15 2012] fullrun_mos1_xmm0679180801_pi300-10000_cl_pass1_src11.ximg exists
[Sat Jul 21 03:55:15 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0679180801_pi300-10000_cl_pass1_src11.csv
[Sat Jul 21 03:55:15 2012] fullrun_mos1_xmm0679180801_pi300-10000_cl_pass1_src11_1.ximg exists
[Sat Jul 21 03:55:15 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0679180801_pi300-10000_cl_pass1_src11.csv
[Sat Jul 21 03:55:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0679180801_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0679180801_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 03:55:16 2012] fullrun_mos1_xmm0679180801_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sat Jul 21 03:55:16 2012] fullrun_mos1_xmm0679180801_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sat Jul 21 03:55:16 2012] Fit fullrun_mos1_xmm0679180801_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Sat Jul 21 04:43:33 2012] Source 13 is offset by 6.024229 and 0.354416 pixels which is larger than
2 X fitted extent = 0.806497 x 0.806497, not incorporating fit results
[Sat Jul 21 04:43:33 2012] Source 13 is offset by -3.662274 and -1.369809 pixels which is larger than
2 X fitted extent = 0.767499 x 0.767499, not incorporating fit results
[Sat Jul 21 04:43:33 2012] Vigneting correction estimate = 1.000000
[Sat Jul 21 04:43:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 21 04:43:33 2012] Assessing source extent using major
[Sat Jul 21 04:43:33 2012] Source does appear to be extended
[Sat Jul 21 04:43:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 09:54:49 2012] XMMSAS src. selection expression = ellipse(25920.360138, 26491.778198, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jul 21 09:54:49 2012] Writing source region out to fullrun_mos1_xmm0679180801_pi300-10000_pass1_cl_src13_src.reg
[Sat Jul 21 09:54:49 2012] Extracting stamp from image fullrun_mos1_xmm0679180801_pi300-10000_cl_sm2.00.img.gz, (261, 268) - (336, 343)
[Sat Jul 21 09:54:49 2012] XMMSAS bgd. selection expression = annulus(25920.360138, 26491.778198, 1087.500000, 2175.000000, X, Y) && !ellipse(25070.831800, 26928.576000, 519.460015, 519.460015, 0.000000, X, Y) && !ellipse(24745.309098, 26299.345320, 1107.616032, 683.232020, 149.887000, X, Y) && !ellipse(25542.339722, 25875.906982, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25633.574493, 27005.775940, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25909.914000, 27470.214000, 1103.648032, 1103.648032, 0.000000, X, Y) && !ellipse(25087.904000, 26794.040000, 2289.008066, 2289.008066, 0.000000, X, Y) && !ellipse(24900.090790, 25535.378235, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24182.098000, 25820.542000, 1790.848052, 1790.848052, 0.000000, X, Y) && !ellipse(24653.393433, 24936.047852, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24276.254486, 27865.163788, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 21 09:54:49 2012] Writing fullrun_mos1_xmm0679180801_pi300-10000_pass1_cl_src13.gif
[Sat Jul 21 09:57:36 2012] Mean detx,y = (-1875.21, -995.21) 
[Sat Jul 21 09:57:38 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 21 09:57:47 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 21 09:57:47 2012] Setting source spectrum file to fullrun_mos1_xmm0679180801_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sat Jul 21 09:57:47 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0679180801_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Sat Jul 21 10:33:59 2012] Not generating rmf since there are only 53 counts
[Sat Jul 21 10:33:59 2012] rmf not generated due to insufficient counts
[Sat Jul 21 11:06:08 2012] Updating aperture counts using extracted products
[Sat Jul 21 11:06:09 2012] Error reading totcts from fullrun_mos1_xmm0679180801_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sat Jul 21 11:06:09 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 21 11:06:09 2012] Using photon index=1.80, rate=0.0042, arf fullrun_mos1_xmm0679180801_pi300-10000_pass1_cl_src13.arf
[Sat Jul 21 11:06:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 21 11:06:09 2012] Updating source flux to 4.2e-14
[Sat Jul 21 11:06:14 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting