[Fri Aug 10 11:35:37 2012] Detection parameters:
  Position = (262.5, 321.0) = 2 0 26.00 -24 53 3.7
  Extent = 21.7" x 21.7", rotation angle = 0 degrees
  Source counts = 37.4 +/- 8.9
  Background counts = 27.5
  Rate = 0.02 +/- 0.004

[Fri Aug 10 11:35:37 2012] Off-axis axis estimate = 3.07'
[Fri Aug 10 11:37:56 2012] Using EEF radius (= 7.97 ")to estimate initial spatial extent for simple fitting
[Fri Aug 10 11:37:56 2012] Initial guess for spatial extent in simple fitting = 7.97"
[Fri Aug 10 11:37:56 2012] source mask rpix=1.8, npix_max = 21, mask sum = 12, frac = 0.552
[Fri Aug 10 11:37:56 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 7.97"
[Fri Aug 10 12:19:25 2012] fullrun_pn_xmm0679180601_pi300-10000_cl_pass0_src15.ximg exists
[Fri Aug 10 12:19:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0679180601_pi300-10000_cl_pass0_src15.csv
[Fri Aug 10 12:19:25 2012] fullrun_pn_xmm0679180601_pi300-10000_cl_pass0_src15_1.ximg exists
[Fri Aug 10 12:19:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0679180601_pi300-10000_cl_pass0_src15.csv
[Fri Aug 10 12:19:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0679180601_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0679180601_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 10 12:19:26 2012] fullrun_pn_xmm0679180601_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Fri Aug 10 12:19:26 2012] fullrun_pn_xmm0679180601_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Fri Aug 10 12:19:26 2012] Fit fullrun_pn_xmm0679180601_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Fri Aug 10 13:45:50 2012] Spatial fit model total counts = 128.189000, observed total counts = 123.000000
[Fri Aug 10 13:45:50 2012] Offset between fit and detection position for source 15 = 1.840779 pixels
[Fri Aug 10 13:45:50 2012] 126.295200 total counts/ 86.335200 bgd. counts: snr = 4.300625
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 1.840779 pixels
  Position = (261.2, 322.2) = 2 0 26.43 -24 53 3.3
  Extent = 6.5 (3.3-9.2)", rotation angle = 0
  Source counts = 40.0 +/- 11.2
  Background counts = 86.3
  Rate = 0.01 +/- 0.003
[Fri Aug 10 13:45:50 2012] Vigneting correction estimate = 1.000000
[Fri Aug 10 13:45:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 10 13:45:50 2012] Assessing source extent using major axis lower bound
[Fri Aug 10 13:45:50 2012] Source does appear to be extended
[Fri Aug 10 13:45:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 10 13:46:10 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 10 13:46:10 2012] Initial guess for spatial extent in simple fitting = 6.53"
[Fri Aug 10 13:46:10 2012] source mask rpix=1.5, npix_max = 16, mask sum = 5, frac = 0.312
[Fri Aug 10 13:46:10 2012] Skipping simple spatial due to low active detector fraction
[Fri Aug 10 15:30:19 2012] Vigneting correction estimate = 1.000000
[Fri Aug 10 15:30:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 10 15:30:19 2012] Assessing source extent using major axis lower bound
[Fri Aug 10 15:30:19 2012] Source does appear to be extended
[Fri Aug 10 15:30:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 10 15:30:38 2012] XMMSAS src. selection expression = ellipse(22674.616400, 27985.312840, 391.529411, 391.529411, 0.000000, X, Y)
[Fri Aug 10 15:30:38 2012] Writing source region out to fullrun_pn_xmm0679180601_pi300-10000_pass1_cl_src15_src.reg
[Fri Aug 10 15:30:38 2012] Extracting stamp from image fullrun_pn_xmm0679180601_pi300-10000_cl_sm2.00.img.gz, (239, 300) - (284, 345)
[Fri Aug 10 15:30:38 2012] XMMSAS bgd. selection expression = annulus(22674.616400, 27985.312840, 652.549019, 1305.098038, X, Y)
[Fri Aug 10 15:30:38 2012] Writing fullrun_pn_xmm0679180601_pi300-10000_pass1_cl_src15.gif
[Fri Aug 10 15:38:15 2012] Mean detx,y = (2548.92, 2747.90) 
[Fri Aug 10 15:38:19 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 10 15:38:47 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 10 15:38:48 2012] Setting source spectrum file to fullrun_pn_xmm0679180601_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Fri Aug 10 15:38:48 2012] Setting bgd. spectrum file to fullrun_pn_xmm0679180601_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Fri Aug 10 15:51:34 2012] Not generating rmf since there are only 39 counts
[Fri Aug 10 15:51:34 2012] rmf not generated due to insufficient counts
[Fri Aug 10 16:18:57 2012] Updating aperture counts using extracted products
[Fri Aug 10 16:18:57 2012] Error reading totcts from fullrun_pn_xmm0679180601_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Fri Aug 10 16:18:57 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 10 16:18:57 2012] Using photon index=1.80, rate=0.0116, arf fullrun_pn_xmm0679180601_pi300-10000_pass1_cl_src15.arf
[Fri Aug 10 16:18:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 10 16:18:58 2012] Updating source flux to 5.7e-14
[Fri Aug 10 16:19:26 2012] Source 15 has fewer than 100.000000 counts, skipping spectral fitting