[Fri Aug 10 11:36:50 2012] Detection parameters:
  Position = (297.3, 420.2) = 2 0 14.89 -24 45 55.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 492.8 +/- 26.3
  Background counts = 3.5
  Rate = 0.04 +/- 0.002

[Fri Aug 10 11:36:51 2012] Off-axis axis estimate = 8.83'
[Fri Aug 10 12:58:55 2012] Using EEF radius (= 10.84 ")to estimate initial spatial extent for simple fitting
[Fri Aug 10 12:58:55 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug 10 12:58:55 2012] Initial guess for spatial extent in simple fitting = 10.84"
[Fri Aug 10 12:58:55 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.005
[Fri Aug 10 12:58:55 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.84"
[Fri Aug 10 13:45:44 2012] fullrun_mos2_xmm0679180601_pi300-10000_cl_pass0_src1.ximg exists
[Fri Aug 10 13:45:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0679180601_pi300-10000_cl_pass0_src1.csv
[Fri Aug 10 13:45:44 2012] fullrun_mos2_xmm0679180601_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Aug 10 13:45:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0679180601_pi300-10000_cl_pass0_src1.csv
[Fri Aug 10 13:45:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0679180601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0679180601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 10 13:45:45 2012] fullrun_mos2_xmm0679180601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Aug 10 13:45:45 2012] fullrun_mos2_xmm0679180601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Aug 10 13:45:45 2012] Fit fullrun_mos2_xmm0679180601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Aug 10 13:46:00 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 14.469970 pixels away
[Fri Aug 10 13:46:00 2012] Vigneting correction estimate = 1.000000
[Fri Aug 10 13:46:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 10 13:46:00 2012] Assessing source extent using major
[Fri Aug 10 13:46:00 2012] Source does appear to be extended
[Fri Aug 10 13:46:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 10 14:44:21 2012] Using EEF radius (= 10.84 ")to estimate initial spatial extent for simple fitting
[Fri Aug 10 14:44:21 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug 10 14:44:21 2012] Initial guess for spatial extent in simple fitting = 10.84"
[Fri Aug 10 14:44:21 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.005
[Fri Aug 10 14:44:21 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 10.84"
[Fri Aug 10 15:30:14 2012] fullrun_mos2_xmm0679180601_pi300-10000_cl_pass1_src1.ximg exists
[Fri Aug 10 15:30:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0679180601_pi300-10000_cl_pass1_src1.csv
[Fri Aug 10 15:30:14 2012] fullrun_mos2_xmm0679180601_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Aug 10 15:30:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0679180601_pi300-10000_cl_pass1_src1.csv
[Fri Aug 10 15:30:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0679180601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0679180601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 10 15:30:14 2012] fullrun_mos2_xmm0679180601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Aug 10 15:30:14 2012] fullrun_mos2_xmm0679180601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Aug 10 15:30:14 2012] Fit fullrun_mos2_xmm0679180601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Aug 10 15:30:27 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 14.469970 pixels away
[Fri Aug 10 15:30:27 2012] Vigneting correction estimate = 1.000000
[Fri Aug 10 15:30:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 10 15:30:27 2012] Assessing source extent using major
[Fri Aug 10 15:30:27 2012] Source does appear to be extended
[Fri Aug 10 15:30:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 10 16:05:35 2012] XMMSAS src. selection expression = ellipse(25814.915649, 36511.094116, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Aug 10 16:05:35 2012] Writing source region out to fullrun_mos2_xmm0679180601_pi300-10000_pass1_cl_src8_src.reg
[Fri Aug 10 16:05:35 2012] Extracting stamp from image fullrun_mos2_xmm0679180601_pi300-10000_cl_sm2.00.img.gz, (260, 383) - (335, 458)
[Fri Aug 10 16:05:35 2012] XMMSAS bgd. selection expression = annulus(25814.915649, 36511.094116, 1087.500000, 2175.000000, X, Y)
[Fri Aug 10 16:05:35 2012] Writing fullrun_mos2_xmm0679180601_pi300-10000_pass1_cl_src8.gif
[Fri Aug 10 16:05:38 2012] Mean detx,y = (-1412.77, -11853.30) 
[Fri Aug 10 16:05:41 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 10 16:06:17 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 10 16:06:17 2012] Setting source spectrum file to fullrun_mos2_xmm0679180601_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Fri Aug 10 16:06:17 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0679180601_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Fri Aug 10 16:12:21 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Aug 10 16:12:21 2012] rmf not generated due to insufficient counts
[Fri Aug 10 16:18:59 2012] Updating aperture counts using extracted products
[Fri Aug 10 16:18:59 2012] Error reading totcts from fullrun_mos2_xmm0679180601_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Fri Aug 10 16:19:00 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 10 16:19:00 2012] Using photon index=1.80, rate=0.0362, arf fullrun_mos2_xmm0679180601_pi300-10000_pass1_cl_src8.arf
[Fri Aug 10 16:19:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 10 16:19:00 2012] Updating source flux to 6.4e-13
[Fri Aug 10 16:19:16 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Aug 10 16:19:25 2012] xmm0679180601/analysis//spectral/fullrun_mos2_xmm0679180601_pi300-10000_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete