[Fri Aug 10 11:36:11 2012] Detection parameters:
  Position = (178.2, 217.1) = 2 0 53.01 -25 0 39.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 27.5 +/- 6.9
  Background counts = 5.1
  Rate = 0.002 +/- 0.0005

[Fri Aug 10 11:36:11 2012] Off-axis axis estimate = 10.53'
[Fri Aug 10 12:19:26 2012] Using EEF radius (= 11.69 ")to estimate initial spatial extent for simple fitting
[Fri Aug 10 12:19:26 2012] Initial guess for spatial extent in simple fitting = 11.69"
[Fri Aug 10 12:19:26 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.886
[Fri Aug 10 12:19:26 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 11.69"
[Fri Aug 10 12:58:55 2012] fullrun_mos1_xmm0679180601_pi300-10000_cl_pass0_src10.ximg exists
[Fri Aug 10 12:58:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679180601_pi300-10000_cl_pass0_src10.csv
[Fri Aug 10 12:58:55 2012] fullrun_mos1_xmm0679180601_pi300-10000_cl_pass0_src10_1.ximg exists
[Fri Aug 10 12:58:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679180601_pi300-10000_cl_pass0_src10.csv
[Fri Aug 10 12:58:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0679180601_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0679180601_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 10 12:58:55 2012] fullrun_mos1_xmm0679180601_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Fri Aug 10 12:58:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679180601_pi300-10000_cl_pass0_tfrozen_src10.csv
[Fri Aug 10 12:58:55 2012] fullrun_mos1_xmm0679180601_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Fri Aug 10 12:58:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679180601_pi300-10000_cl_pass0_tfrozen_src10.csv
[Fri Aug 10 12:58:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0679180601_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0679180601_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 10 13:45:54 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 14.678666 pixels away
[Fri Aug 10 13:45:54 2012] Vigneting correction estimate = 1.000000
[Fri Aug 10 13:45:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 10 13:45:54 2012] Assessing source extent using major
[Fri Aug 10 13:45:54 2012] Source does appear to be extended
[Fri Aug 10 13:45:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 10 14:12:29 2012] Using EEF radius (= 11.69 ")to estimate initial spatial extent for simple fitting
[Fri Aug 10 14:12:29 2012] Initial guess for spatial extent in simple fitting = 11.69"
[Fri Aug 10 14:12:29 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.886
[Fri Aug 10 14:12:29 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 11.69"
[Fri Aug 10 14:44:21 2012] fullrun_mos1_xmm0679180601_pi300-10000_cl_pass1_src9.ximg exists
[Fri Aug 10 14:44:21 2012] fullrun_mos1_xmm0679180601_pi300-10000_cl_pass1_src9_1.ximg exists
[Fri Aug 10 14:44:21 2012] Fit fullrun_mos1_xmm0679180601_pi300-10000_cl_pass1_src9 appears to have run properly
[Fri Aug 10 14:44:21 2012] fullrun_mos1_xmm0679180601_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Fri Aug 10 14:44:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679180601_pi300-10000_cl_pass1_tfrozen_src9.csv
[Fri Aug 10 14:44:21 2012] fullrun_mos1_xmm0679180601_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Fri Aug 10 14:44:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679180601_pi300-10000_cl_pass1_tfrozen_src9.csv
[Fri Aug 10 14:44:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0679180601_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0679180601_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 10 15:30:22 2012] Spatial fit model total counts = 58.780600, observed total counts = 60.000000
[Fri Aug 10 15:30:22 2012] Offset between fit and detection position for source 11 = 0.141398 pixels
[Fri Aug 10 15:30:22 2012] 56.737300 total counts/ 46.513000 bgd. counts: snr = 1.499155
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.141398 pixels
  Position = (178.1, 217.2) = 2 0 53.02 -25 0 39.7
  Extent = 3.1" x 2.8", rotation angle = 93
  Source counts = 10.2 +/- 7.5
  Background counts = 46.5
  Rate = 0.0008 +/- 0.0006
  Deleting source due to low Poisson probability