[Fri Jun 29 10:12:48 2012] Detection parameters:
  Position = (281.3, 297.6) = 4 54 44.45 -20 16 21.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 64.1 +/- 10.5
  Background counts = 7.3
  Rate = 0.005 +/- 0.0007

[Fri Jun 29 10:12:48 2012] Off-axis axis estimate = 1.24'
[Fri Jun 29 12:40:42 2012] Using EEF radius (= 7.05 ")to estimate initial spatial extent for simple fitting
[Fri Jun 29 12:40:42 2012] Initial guess for spatial extent in simple fitting = 7.05"
[Fri Jun 29 12:40:42 2012] source mask rpix=1.6, npix_max = 17, mask sum = 12, frac = 0.667
[Fri Jun 29 12:40:42 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 7.05"
[Fri Jun 29 14:08:39 2012] fullrun_mos2_xmm0679180501_pi300-10000_cl_pass0_src11.ximg exists
[Fri Jun 29 14:08:39 2012] fullrun_mos2_xmm0679180501_pi300-10000_cl_pass0_src11_1.ximg exists
[Fri Jun 29 14:08:39 2012] Fit fullrun_mos2_xmm0679180501_pi300-10000_cl_pass0_src11 appears to have run properly
[Fri Jun 29 14:08:40 2012] fullrun_mos2_xmm0679180501_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Fri Jun 29 14:08:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0679180501_pi300-10000_cl_pass0_tfrozen_src11.csv
[Fri Jun 29 14:08:40 2012] fullrun_mos2_xmm0679180501_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Fri Jun 29 14:08:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0679180501_pi300-10000_cl_pass0_tfrozen_src11.csv
[Fri Jun 29 14:08:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0679180501_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0679180501_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 29 14:09:06 2012] Warning, spatial fit 11 centroid is now closest to src. 23
[Fri Jun 29 14:09:06 2012] Vigneting correction estimate = 1.000000
[Fri Jun 29 14:09:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 29 14:09:06 2012] Assessing source extent using major
[Fri Jun 29 14:09:06 2012] Source does appear to be extended
[Fri Jun 29 14:09:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 29 14:09:06 2012] Source is confused with source 13
[Fri Jun 29 16:05:55 2012] Using EEF radius (= 7.05 ")to estimate initial spatial extent for simple fitting
[Fri Jun 29 16:05:55 2012] Initial guess for spatial extent in simple fitting = 7.05"
[Fri Jun 29 16:05:55 2012] source mask rpix=1.6, npix_max = 17, mask sum = 12, frac = 0.667
[Fri Jun 29 16:05:55 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 7.05"
[Fri Jun 29 17:17:26 2012] fullrun_mos2_xmm0679180501_pi300-10000_cl_pass1_src11.ximg exists
[Fri Jun 29 17:17:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0679180501_pi300-10000_cl_pass1_src11.csv
[Fri Jun 29 17:17:26 2012] fullrun_mos2_xmm0679180501_pi300-10000_cl_pass1_src11_1.ximg exists
[Fri Jun 29 17:17:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0679180501_pi300-10000_cl_pass1_src11.csv
[Fri Jun 29 17:17:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0679180501_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0679180501_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 29 17:17:27 2012] fullrun_mos2_xmm0679180501_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Fri Jun 29 17:17:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0679180501_pi300-10000_cl_pass1_tfrozen_src11.csv
[Fri Jun 29 17:17:27 2012] fullrun_mos2_xmm0679180501_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Fri Jun 29 17:17:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0679180501_pi300-10000_cl_pass1_tfrozen_src11.csv
[Fri Jun 29 17:17:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0679180501_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0679180501_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 29 17:17:44 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 27.753428 pixels away
[Fri Jun 29 17:17:44 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 13.161329 pixels away
[Fri Jun 29 17:17:44 2012] Vigneting correction estimate = 1.000000
[Fri Jun 29 17:17:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 29 17:17:44 2012] Assessing source extent using major
[Fri Jun 29 17:17:44 2012] Source does appear to be extended
[Fri Jun 29 17:17:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 29 18:30:15 2012] XMMSAS src. selection expression = ellipse(24423.951111, 25844.667908, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 29 18:30:15 2012] Writing source region out to fullrun_mos2_xmm0679180501_pi300-10000_pass1_cl_src12_src.reg
[Fri Jun 29 18:30:15 2012] Extracting stamp from image fullrun_mos2_xmm0679180501_pi300-10000_cl_sm2.00.img.gz, (244, 260) - (319, 335)
[Fri Jun 29 18:30:15 2012] XMMSAS bgd. selection expression = annulus(24423.951111, 25844.667908, 1087.500000, 2175.000000, X, Y) && !ellipse(24239.779880, 25077.375240, 625.949618, 625.949618, -0.000000, X, Y) && !ellipse(23661.599274, 25110.475311, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23808.978740, 27210.300200, 261.906408, 261.906408, 0.000000, X, Y) && !ellipse(23825.515472, 25619.309021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23479.525330, 24519.120636, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23736.040985, 25969.926880, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23825.443787, 23526.652100, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23069.538361, 25285.805481, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 29 18:30:15 2012] Writing fullrun_mos2_xmm0679180501_pi300-10000_pass1_cl_src12.gif
[Fri Jun 29 18:33:02 2012] Mean detx,y = (-222.74, -1043.39) 
[Fri Jun 29 18:33:03 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 29 18:33:12 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 29 18:33:13 2012] Setting source spectrum file to fullrun_mos2_xmm0679180501_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Fri Jun 29 18:33:13 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0679180501_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Fri Jun 29 18:42:03 2012] Not generating rmf since there are only 64 counts
[Fri Jun 29 18:42:03 2012] rmf not generated due to insufficient counts
[Fri Jun 29 18:44:23 2012] Updating aperture counts using extracted products
[Fri Jun 29 18:44:23 2012] Error reading totcts from fullrun_mos2_xmm0679180501_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Fri Jun 29 18:44:24 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 29 18:44:24 2012] Using photon index=1.80, rate=0.00451, arf fullrun_mos2_xmm0679180501_pi300-10000_pass1_cl_src12.arf
[Fri Jun 29 18:44:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 29 18:44:24 2012] Updating source flux to 4.6e-14
[Fri Jun 29 18:44:42 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting