[Thu Jun 13 00:39:27 2013] Detection parameters:
  Position = (279.1, 359.0) = 16 45 4.95 57 37 39.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 423.5 +/- 24.8
  Background counts = 29.1
  Rate = 0.02 +/- 0.001

[Thu Jun 13 00:39:28 2013] Off-axis axis estimate = 4.61'
[Thu Jun 13 00:39:49 2013] Using EEF radius (= 8.73 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 00:39:49 2013] Initial guess for spatial extent in simple fitting = 8.73"
[Thu Jun 13 00:39:49 2013] source mask rpix=2.0, npix_max = 25, mask sum = 17, frac = 0.676
[Thu Jun 13 00:39:49 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 8.73"
[Thu Jun 13 00:39:49 2013] fullrun_pn_xmm0678380901_pi300-10000_cl_pass0_src2.ximg exists
[Thu Jun 13 00:39:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0678380901_pi300-10000_cl_pass0_src2.csv
[Thu Jun 13 00:39:49 2013] fullrun_pn_xmm0678380901_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu Jun 13 00:39:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0678380901_pi300-10000_cl_pass0_src2.csv
[Thu Jun 13 00:39:49 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0678380901_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0678380901_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 00:39:50 2013] fullrun_pn_xmm0678380901_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu Jun 13 00:39:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0678380901_pi300-10000_cl_pass0_tfrozen_src2.csv
[Thu Jun 13 00:39:50 2013] fullrun_pn_xmm0678380901_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu Jun 13 00:39:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0678380901_pi300-10000_cl_pass0_tfrozen_src2.csv
[Thu Jun 13 00:39:50 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0678380901_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0678380901_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 00:39:59 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 10.429626 pixels away
[Thu Jun 13 00:39:59 2013] Source 2 is offset by -5.304560 and 0.145710 pixels which is larger than
2 X fitted extent = 1.312841 x 1.312841, not incorporating fit results
[Thu Jun 13 00:39:59 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 00:39:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 00:39:59 2013] Assessing source extent using major
[Thu Jun 13 00:39:59 2013] Source does appear to be extended
[Thu Jun 13 00:39:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 00:40:13 2013] Using EEF radius (= 8.73 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 00:40:13 2013] Initial guess for spatial extent in simple fitting = 8.73"
[Thu Jun 13 00:40:13 2013] source mask rpix=2.0, npix_max = 25, mask sum = 17, frac = 0.676
[Thu Jun 13 00:40:13 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 8.73"
[Thu Jun 13 00:40:13 2013] fullrun_pn_xmm0678380901_pi300-10000_cl_pass1_src2.ximg exists
[Thu Jun 13 00:40:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0678380901_pi300-10000_cl_pass1_src2.csv
[Thu Jun 13 00:40:13 2013] fullrun_pn_xmm0678380901_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu Jun 13 00:40:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0678380901_pi300-10000_cl_pass1_src2.csv
[Thu Jun 13 00:40:13 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0678380901_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0678380901_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 00:40:13 2013] fullrun_pn_xmm0678380901_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu Jun 13 00:40:13 2013] fullrun_pn_xmm0678380901_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu Jun 13 00:40:13 2013] Fit fullrun_pn_xmm0678380901_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Thu Jun 13 00:40:22 2013] Spatial fit model total counts = 612.641000, observed total counts = 617.000000
[Thu Jun 13 00:40:22 2013] Offset between fit and detection position for source 2 = 0.067046 pixels
[Thu Jun 13 00:40:22 2013] 644.969000 total counts/ 356.659000 bgd. counts: snr = 15.266276
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.067046 pixels
  Position = (279.1, 358.9) = 16 45 4.94 57 37 39.8
  Extent = 5.0 (4.4-5.9)", rotation angle = 0
  Source counts = 288.3 +/- 25.4
  Background counts = 356.7
  Rate = 0.01 +/- 0.001
[Thu Jun 13 00:40:23 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 00:40:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 00:40:23 2013] Assessing source extent using major axis lower bound
[Thu Jun 13 00:40:23 2013] Source does appear to be extended
[Thu Jun 13 00:40:23 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 00:40:36 2013] XMMSAS src. selection expression = ellipse(24236.303680, 31174.909500, 302.058009, 302.058009, 0.000000, X, Y)
[Thu Jun 13 00:40:36 2013] Not overwriting source region fullrun_pn_xmm0678380901_pi300-10000_pass1_cl_src2_src.reg
[Thu Jun 13 00:40:36 2013] Extracting stamp from image fullrun_pn_xmm0678380901_pi300-10000_cl_sm2.00.img.gz, (262, 342) - (296, 376)
[Thu Jun 13 00:40:36 2013] XMMSAS bgd. selection expression = annulus(24236.303680, 31174.909500, 503.430014, 1006.860029, X, Y) && !ellipse(25326.254852, 31841.919769, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 13 00:40:36 2013] Writing fullrun_pn_xmm0678380901_pi300-10000_pass1_cl_src2.gif
[Thu Jun 13 00:40:37 2013] ../../xmm0678380901/products/events/fullrun_pn_xmm0678380901_pi300-10000_pass1_cl_src2_src.evt and ../../xmm0678380901/products/events/fullrun_pn_xmm0678380901_pi300-10000_pass1_cl_src2_bgd.evt exist, delete to re-create
[Thu Jun 13 00:40:37 2013] Mean detx,y = (-1871.59, -3977.94) 
[Thu Jun 13 00:40:37 2013] ../../xmm0678380901/products/images/fullrun_pn_xmm0678380901_pi300-10000_pass1_cl_src2_src.img and ../../xmm0678380901/products/images/fullrun_pn_xmm0678380901_pi300-10000_pass1_cl_src2_bgd.img exist, delete to re-create
[Thu Jun 13 00:40:37 2013] ../../xmm0678380901/products/spectra/fullrun_pn_xmm0678380901_pi300-10000_pass1_cl_src2_src_b10.pi.gz and ../../xmm0678380901/products/spectra/fullrun_pn_xmm0678380901_pi300-10000_pass1_cl_src2_bgd.pi exist, delete to re-create
[Thu Jun 13 00:40:37 2013] Setting source spectrum file to fullrun_pn_xmm0678380901_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Jun 13 00:40:37 2013] Setting bgd. spectrum file to fullrun_pn_xmm0678380901_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu Jun 13 00:40:37 2013] ../../xmm0678380901/products/lightcurves/fullrun_pn_xmm0678380901_pi300-10000_pass1_cl_src2_src.lc and ../../xmm0678380901/products/lightcurves/fullrun_pn_xmm0678380901_pi300-10000_pass1_cl_src2_bgd.lc exist, delete to re-create
[Thu Jun 13 00:40:44 2013] fullrun_pn_xmm0678380901_pi300-10000_pass1_cl_src2.rmf exists, delete to re-create
[Thu Jun 13 00:40:44 2013] fullrun_pn_xmm0678380901_pi300-10000_pass1_cl_src2.arf exists, delete to re-create
[Thu Jun 13 01:37:08 2013] Updating aperture counts using extracted products
[Thu Jun 13 01:37:08 2013] Total counts from fullrun_pn_xmm0678380901_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 344.00
[Thu Jun 13 01:37:08 2013] Total counts from fullrun_pn_xmm0678380901_pi300-10000_pass1_cl_src2_bgd.pi.gz = 186.00
[Thu Jun 13 01:37:08 2013] Got source and background scale factors 243764.000000, 997852.000000
[Thu Jun 13 01:37:08 2013] User source parameters:
  Position = (279.1, 358.9) = 16 45 4.94 57 37 39.8
  Extent = 5.0 (4.4-5.9)", rotation angle = 0
  Source aperture counts = 298.6 +/- 19.6
  Background aperture counts = 45.4
  Rate = 0.01 +/- 0.0007

[Thu Jun 13 01:37:13 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 13 01:37:13 2013] Using photon index=1.80, rate=0.0108, arf fullrun_pn_xmm0678380901_pi300-10000_pass1_cl_src2.arf
[Thu Jun 13 01:37:13 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 13 01:37:13 2013] Updating source flux to 6.8e-14
[Thu Jun 13 01:37:22 2013] Flag b found in src. 2 procflags, skipping spectral fitting
[Thu Jun 13 01:37:26 2013] xmm0678380901/analysis//spectral/fullrun_pn_xmm0678380901_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete