[Thu Jun 13 00:39:28 2013] Detection parameters:
  Position = (357.2, 320.3) = 16 44 22.69 57 34 52.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 92.2 +/- 13.9
  Background counts = 33.1
  Rate = 0.004 +/- 0.0006

[Thu Jun 13 00:39:28 2013] Off-axis axis estimate = 4.55'
[Thu Jun 13 00:39:49 2013] Using EEF radius (= 8.70 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 00:39:49 2013] Initial guess for spatial extent in simple fitting = 8.70"
[Thu Jun 13 00:39:49 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 1.000
[Thu Jun 13 00:39:49 2013] Giving source the simple spatial ID 18 for pass 0, mean size = 8.70"
[Thu Jun 13 00:39:50 2013] fullrun_pn_xmm0678380901_pi300-10000_cl_pass0_src18.ximg exists
[Thu Jun 13 00:39:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0678380901_pi300-10000_cl_pass0_src18.csv
[Thu Jun 13 00:39:50 2013] fullrun_pn_xmm0678380901_pi300-10000_cl_pass0_src18_1.ximg exists
[Thu Jun 13 00:39:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0678380901_pi300-10000_cl_pass0_src18.csv
[Thu Jun 13 00:39:50 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0678380901_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0678380901_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 00:39:51 2013] fullrun_pn_xmm0678380901_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Thu Jun 13 00:39:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0678380901_pi300-10000_cl_pass0_tfrozen_src18.csv
[Thu Jun 13 00:39:51 2013] fullrun_pn_xmm0678380901_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Thu Jun 13 00:39:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0678380901_pi300-10000_cl_pass0_tfrozen_src18.csv
[Thu Jun 13 00:39:51 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0678380901_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0678380901_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 00:39:59 2013] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 11.003934 pixels away
[Thu Jun 13 00:39:59 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 00:39:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 00:39:59 2013] Assessing source extent using major
[Thu Jun 13 00:39:59 2013] Source does appear to be extended
[Thu Jun 13 00:39:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 00:40:13 2013] Using EEF radius (= 8.70 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 00:40:13 2013] Initial guess for spatial extent in simple fitting = 8.70"
[Thu Jun 13 00:40:13 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 1.000
[Thu Jun 13 00:40:13 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 8.70"
[Thu Jun 13 00:40:13 2013] fullrun_pn_xmm0678380901_pi300-10000_cl_pass1_src17.ximg exists
[Thu Jun 13 00:40:13 2013] fullrun_pn_xmm0678380901_pi300-10000_cl_pass1_src17_1.ximg exists
[Thu Jun 13 00:40:13 2013] Fit fullrun_pn_xmm0678380901_pi300-10000_cl_pass1_src17 appears to have run properly
[Thu Jun 13 00:40:14 2013] fullrun_pn_xmm0678380901_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Thu Jun 13 00:40:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0678380901_pi300-10000_cl_pass1_tfrozen_src17.csv
[Thu Jun 13 00:40:14 2013] fullrun_pn_xmm0678380901_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Thu Jun 13 00:40:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0678380901_pi300-10000_cl_pass1_tfrozen_src17.csv
[Thu Jun 13 00:40:14 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0678380901_pi300-10000_cl_pass1_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0678380901_pi300-10000_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 00:40:23 2013] Source 19 is offset by -7.981096 and -4.485454 pixels which is larger than
2 X fitted extent = 1.023940 x 1.023940, not incorporating fit results
[Thu Jun 13 00:40:23 2013] Spatial fit model total counts = 355.593000, observed total counts = 332.000000
[Thu Jun 13 00:40:23 2013] Offset between fit and detection position for source 19 = 1.210644 pixels
[Thu Jun 13 00:40:23 2013] 355.356700 total counts/ 294.077000 bgd. counts: snr = 3.573437
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 1.210644 pixels
  Position = (356.7, 321.4) = 16 44 22.98 57 34 56.6
  Extent = 5.2" x 4.1", rotation angle = 248
  Source counts = 61.3 +/- 18.9
  Background counts = 294.1
  Rate = 0.002 +/- 0.0007
[Thu Jun 13 00:40:23 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 00:40:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 00:40:23 2013] Assessing source extent using major
[Thu Jun 13 00:40:23 2013] Source does appear to be extended
[Thu Jun 13 00:40:23 2013] Computing asymmetry using major and minor axis, asym = 1.29
[Thu Jun 13 00:40:37 2013] XMMSAS src. selection expression = ellipse(30983.892745, 27914.895832, 314.981799, 243.889570, 247.961115, X, Y)
[Thu Jun 13 00:40:37 2013] Not overwriting source region fullrun_pn_xmm0678380901_pi300-10000_pass1_cl_src19_src.reg
[Thu Jun 13 00:40:37 2013] Extracting stamp from image fullrun_pn_xmm0678380901_pi300-10000_cl_sm2.00.img.gz, (339, 303) - (375, 340)
[Thu Jun 13 00:40:37 2013] XMMSAS bgd. selection expression = annulus(30983.892745, 27914.895832, 524.969665, 1049.939329, X, Y) && !ellipse(31167.855621, 29708.178925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31083.677917, 28866.346130, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 13 00:40:37 2013] Writing fullrun_pn_xmm0678380901_pi300-10000_pass1_cl_src19.gif
[Thu Jun 13 00:40:40 2013] ../../xmm0678380901/products/events/fullrun_pn_xmm0678380901_pi300-10000_pass1_cl_src19_src.evt and ../../xmm0678380901/products/events/fullrun_pn_xmm0678380901_pi300-10000_pass1_cl_src19_bgd.evt exist, delete to re-create
[Thu Jun 13 00:40:40 2013] Mean detx,y = (4274.01, 362.51) 
[Thu Jun 13 00:40:40 2013] ../../xmm0678380901/products/images/fullrun_pn_xmm0678380901_pi300-10000_pass1_cl_src19_src.img and ../../xmm0678380901/products/images/fullrun_pn_xmm0678380901_pi300-10000_pass1_cl_src19_bgd.img exist, delete to re-create
[Thu Jun 13 00:40:40 2013] ../../xmm0678380901/products/spectra/fullrun_pn_xmm0678380901_pi300-10000_pass1_cl_src19_src_b10.pi.gz and ../../xmm0678380901/products/spectra/fullrun_pn_xmm0678380901_pi300-10000_pass1_cl_src19_bgd.pi exist, delete to re-create
[Thu Jun 13 00:40:40 2013] Setting source spectrum file to fullrun_pn_xmm0678380901_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Thu Jun 13 00:40:40 2013] Setting bgd. spectrum file to fullrun_pn_xmm0678380901_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Thu Jun 13 00:40:40 2013] ../../xmm0678380901/products/lightcurves/fullrun_pn_xmm0678380901_pi300-10000_pass1_cl_src19_src.lc and ../../xmm0678380901/products/lightcurves/fullrun_pn_xmm0678380901_pi300-10000_pass1_cl_src19_bgd.lc exist, delete to re-create
[Thu Jun 13 00:40:44 2013] Not generating rmf since there are only 61 counts
[Thu Jun 13 00:40:44 2013] rmf not generated due to insufficient counts
[Thu Jun 13 00:40:44 2013] fullrun_pn_xmm0678380901_pi300-10000_pass1_cl_src19.arf exists, delete to re-create
[Thu Jun 13 01:37:11 2013] Updating aperture counts using extracted products
[Thu Jun 13 01:37:11 2013] Total counts from fullrun_pn_xmm0678380901_pi300-10000_pass1_cl_src19_src_b10.pi.gz = 101.00
[Thu Jun 13 01:37:11 2013] Total counts from fullrun_pn_xmm0678380901_pi300-10000_pass1_cl_src19_bgd.pi.gz = 168.00
[Thu Jun 13 01:37:11 2013] Got source and background scale factors 243200.000000, 1068842.000000
[Thu Jun 13 01:37:11 2013] User source parameters:
  Position = (356.7, 321.4) = 16 44 22.98 57 34 56.6
  Extent = 5.2" x 4.1", rotation angle = 248
  Source aperture counts = 62.8 +/- 11.1
  Background aperture counts = 38.2
  Rate = 0.002 +/- 0.0004

[Thu Jun 13 01:37:13 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 13 01:37:13 2013] Using photon index=1.80, rate=0.0023, arf fullrun_pn_xmm0678380901_pi300-10000_pass1_cl_src19.arf
[Thu Jun 13 01:37:13 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 13 01:37:13 2013] Updating source flux to 9e-15
[Thu Jun 13 01:37:22 2013] Flag b found in src. 19 procflags, skipping spectral fitting
[Thu Jun 13 01:37:22 2013] Source 19 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Jun 13 01:37:26 2013] xmm0678380901/analysis//spectral/fullrun_pn_xmm0678380901_pi300-10000_pass1_cl_src19_pl.csv not found, spectral fit skipped or did not complete