[Thu Jun 13 00:39:29 2013] Detection parameters:
  Position = (225.9, 431.8) = 16 45 33.89 57 42 57.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 95.6 +/- 12.0
  Background counts = 8.4
  Rate = 0.003 +/- 0.0004

[Thu Jun 13 00:39:30 2013] Off-axis axis estimate = 11.01'
[Thu Jun 13 00:39:53 2013] Using EEF radius (= 11.93 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 00:39:53 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 13 00:39:53 2013] Initial guess for spatial extent in simple fitting = 11.93"
[Thu Jun 13 00:39:53 2013] source mask rpix=2.7, npix_max = 42, mask sum = 36, frac = 0.856
[Thu Jun 13 00:39:53 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 11.93"
[Thu Jun 13 00:39:53 2013] fullrun_mos2_xmm0678380901_pi300-10000_cl_pass0_src3.ximg exists
[Thu Jun 13 00:39:53 2013] fullrun_mos2_xmm0678380901_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Jun 13 00:39:53 2013] Fit fullrun_mos2_xmm0678380901_pi300-10000_cl_pass0_src3 appears to have run properly
[Thu Jun 13 00:39:53 2013] fullrun_mos2_xmm0678380901_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Jun 13 00:39:53 2013] fullrun_mos2_xmm0678380901_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Jun 13 00:39:53 2013] Fit fullrun_mos2_xmm0678380901_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Jun 13 00:40:05 2013] Spatial fit model total counts = 175.997000, observed total counts = 176.000000
[Thu Jun 13 00:40:05 2013] Offset between fit and detection position for source 4 = 0.391029 pixels
[Thu Jun 13 00:40:05 2013] 177.639800 total counts/ 114.110000 bgd. counts: snr = 5.947242
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.391029 pixels
  Position = (225.5, 431.6) = 16 45 34.09 57 42 55.8
  Extent = 5.3 (4.2-6.8)", rotation angle = 0
  Source counts = 63.5 +/- 13.3
  Background counts = 114.1
  Rate = 0.002 +/- 0.0005
[Thu Jun 13 00:40:05 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 00:40:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 00:40:05 2013] Assessing source extent using major axis lower bound
[Thu Jun 13 00:40:05 2013] Source does appear to be extended
[Thu Jun 13 00:40:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 00:40:15 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 13 00:40:15 2013] Initial guess for spatial extent in simple fitting = 5.35"
[Thu Jun 13 00:40:15 2013] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.752
[Thu Jun 13 00:40:15 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 5.35"
[Thu Jun 13 00:40:16 2013] fullrun_mos2_xmm0678380901_pi300-10000_cl_pass1_src3.ximg exists
[Thu Jun 13 00:40:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0678380901_pi300-10000_cl_pass1_src3.csv
[Thu Jun 13 00:40:16 2013] fullrun_mos2_xmm0678380901_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Jun 13 00:40:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0678380901_pi300-10000_cl_pass1_src3.csv
[Thu Jun 13 00:40:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0678380901_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0678380901_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 00:40:17 2013] fullrun_mos2_xmm0678380901_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Jun 13 00:40:17 2013] fullrun_mos2_xmm0678380901_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Jun 13 00:40:17 2013] Fit fullrun_mos2_xmm0678380901_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Thu Jun 13 00:40:28 2013] Spatial fit model total counts = 163.977000, observed total counts = 164.000000
[Thu Jun 13 00:40:28 2013] Offset between fit and detection position for source 4 = 0.005210 pixels
[Thu Jun 13 00:40:28 2013] 165.607800 total counts/ 102.971000 bgd. counts: snr = 6.172656
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.005210 pixels
  Position = (225.5, 431.6) = 16 45 34.09 57 42 55.8
  Extent = 5.3 (4.1-6.7)", rotation angle = 0
  Source counts = 62.6 +/- 12.9
  Background counts = 103.0
  Rate = 0.002 +/- 0.0005
[Thu Jun 13 00:40:28 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 00:40:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 00:40:28 2013] Assessing source extent using major axis lower bound
[Thu Jun 13 00:40:28 2013] Source does appear to be extended
[Thu Jun 13 00:40:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 01:25:41 2013] XMMSAS src. selection expression = ellipse(19569.795600, 37501.131400, 315.577209, 315.577209, 0.000000, X, Y)
[Thu Jun 13 01:25:41 2013] Writing source region out to fullrun_mos2_xmm0678380901_pi300-10000_pass1_cl_src4_src.reg
[Thu Jun 13 01:25:41 2013] Extracting stamp from image fullrun_mos2_xmm0678380901_pi300-10000_cl_sm2.00.img.gz, (207, 413) - (244, 450)
[Thu Jun 13 01:25:41 2013] XMMSAS bgd. selection expression = annulus(19569.795600, 37501.131400, 525.962015, 1051.924030, X, Y)
[Thu Jun 13 01:25:41 2013] Writing fullrun_mos2_xmm0678380901_pi300-10000_pass1_cl_src4.gif
[Thu Jun 13 01:26:08 2013] Mean detx,y = (5713.89, 10770.35) 
[Thu Jun 13 01:26:08 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 13 01:26:15 2013] Binned source spectrum to 10 counts/bin
[Thu Jun 13 01:26:15 2013] Setting source spectrum file to fullrun_mos2_xmm0678380901_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Thu Jun 13 01:26:15 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0678380901_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Thu Jun 13 01:30:57 2013] Not generating rmf since there are only 62 counts
[Thu Jun 13 01:30:57 2013] rmf not generated due to insufficient counts
[Thu Jun 13 01:37:16 2013] Updating aperture counts using extracted products
[Thu Jun 13 01:37:16 2013] Total counts from fullrun_mos2_xmm0678380901_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 80.00
[Thu Jun 13 01:37:16 2013] Total counts from fullrun_mos2_xmm0678380901_pi300-10000_pass1_cl_src4_bgd.pi.gz = 126.00
[Thu Jun 13 01:37:16 2013] Got source and background scale factors 316800.000000, 2549032.000000
[Thu Jun 13 01:37:16 2013] User source parameters:
  Position = (225.5, 431.6) = 16 45 34.09 57 42 55.8
  Extent = 5.3 (4.1-6.7)", rotation angle = 0
  Source aperture counts = 64.3 +/- 10.0
  Background aperture counts = 15.7
  Rate = 0.002 +/- 0.0004

[Thu Jun 13 01:37:18 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 13 01:37:18 2013] Using photon index=1.80, rate=0.00221, arf fullrun_mos2_xmm0678380901_pi300-10000_pass1_cl_src4.arf
[Thu Jun 13 01:37:18 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 13 01:37:18 2013] Updating source flux to 7.5e-14
[Thu Jun 13 01:37:21 2013] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Jun 13 01:37:22 2013] xmm0678380901/analysis//spectral/fullrun_mos2_xmm0678380901_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete