[Thu Jun 13 00:39:30 2013] Detection parameters:
  Position = (388.2, 210.9) = 16 44 6.13 57 26 54.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 45.3 +/- 9.5
  Background counts = 9.7
  Rate = 0.003 +/- 0.0006

[Thu Jun 13 00:39:30 2013] Off-axis axis estimate = 9.09'
[Thu Jun 13 00:39:53 2013] Using EEF radius (= 10.97 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 00:39:53 2013] Initial guess for spatial extent in simple fitting = 10.97"
[Thu Jun 13 00:39:53 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.985
[Thu Jun 13 00:39:53 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 10.97"
[Thu Jun 13 00:39:53 2013] fullrun_mos2_xmm0678380901_pi300-10000_cl_pass0_src8.ximg exists
[Thu Jun 13 00:39:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0678380901_pi300-10000_cl_pass0_src8.csv
[Thu Jun 13 00:39:53 2013] fullrun_mos2_xmm0678380901_pi300-10000_cl_pass0_src8_1.ximg exists
[Thu Jun 13 00:39:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0678380901_pi300-10000_cl_pass0_src8.csv
[Thu Jun 13 00:39:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0678380901_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0678380901_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 00:39:54 2013] fullrun_mos2_xmm0678380901_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Thu Jun 13 00:39:54 2013] fullrun_mos2_xmm0678380901_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Thu Jun 13 00:39:54 2013] Fit fullrun_mos2_xmm0678380901_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Thu Jun 13 00:40:05 2013] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 13.612344 pixels away
[Thu Jun 13 00:40:05 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 00:40:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 00:40:05 2013] Assessing source extent using major
[Thu Jun 13 00:40:05 2013] Source does appear to be extended
[Thu Jun 13 00:40:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 00:40:15 2013] Using EEF radius (= 10.97 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 00:40:15 2013] Initial guess for spatial extent in simple fitting = 10.97"
[Thu Jun 13 00:40:15 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.985
[Thu Jun 13 00:40:15 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 10.97"
[Thu Jun 13 00:40:16 2013] fullrun_mos2_xmm0678380901_pi300-10000_cl_pass1_src8.ximg exists
[Thu Jun 13 00:40:16 2013] fullrun_mos2_xmm0678380901_pi300-10000_cl_pass1_src8_1.ximg exists
[Thu Jun 13 00:40:16 2013] Fit fullrun_mos2_xmm0678380901_pi300-10000_cl_pass1_src8 appears to have run properly
[Thu Jun 13 00:40:17 2013] fullrun_mos2_xmm0678380901_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Thu Jun 13 00:40:17 2013] fullrun_mos2_xmm0678380901_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Thu Jun 13 00:40:17 2013] Fit fullrun_mos2_xmm0678380901_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Thu Jun 13 00:40:28 2013] Warning, spatial fit 8 centroid is now closest to src. 15
[Thu Jun 13 00:40:28 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 00:40:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 00:40:28 2013] Assessing source extent using major
[Thu Jun 13 00:40:28 2013] Source does appear to be extended
[Thu Jun 13 00:40:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 01:25:41 2013] XMMSAS src. selection expression = ellipse(33721.627411, 18296.602814, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 13 01:25:41 2013] Writing source region out to fullrun_mos2_xmm0678380901_pi300-10000_pass1_cl_src16_src.reg
[Thu Jun 13 01:25:41 2013] Extracting stamp from image fullrun_mos2_xmm0678380901_pi300-10000_cl_sm2.00.img.gz, (351, 173) - (426, 248)
[Thu Jun 13 01:25:41 2013] XMMSAS bgd. selection expression = annulus(33721.627411, 18296.602814, 1087.500000, 2175.000000, X, Y) && !ellipse(31716.636902, 15888.849670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31898.562164, 21159.052292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35093.234131, 19102.122772, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 13 01:25:41 2013] Writing fullrun_mos2_xmm0678380901_pi300-10000_pass1_cl_src16.gif
[Thu Jun 13 01:27:09 2013] Mean detx,y = (-5364.16, -10299.74) 
[Thu Jun 13 01:27:10 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 13 01:27:17 2013] Binned source spectrum to 10 counts/bin
[Thu Jun 13 01:27:17 2013] Setting source spectrum file to fullrun_mos2_xmm0678380901_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Thu Jun 13 01:27:17 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0678380901_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Thu Jun 13 01:31:23 2013] Not generating rmf since there are only 45 counts
[Thu Jun 13 01:31:23 2013] rmf not generated due to insufficient counts
[Thu Jun 13 01:37:17 2013] Updating aperture counts using extracted products
[Thu Jun 13 01:37:17 2013] Total counts from fullrun_mos2_xmm0678380901_pi300-10000_pass1_cl_src16_src_b10.pi.gz = 107.00
[Thu Jun 13 01:37:17 2013] Total counts from fullrun_mos2_xmm0678380901_pi300-10000_pass1_cl_src16_bgd.pi.gz = 425.00
[Thu Jun 13 01:37:17 2013] Got source and background scale factors 1340800.000000, 9237992.000000
[Thu Jun 13 01:37:17 2013] User source parameters:
  Position = (388.2, 210.9) = 16 44 6.13 57 26 54.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 45.3 +/- 11.4
  Background aperture counts = 61.7
  Rate = 0.002 +/- 0.0004

[Thu Jun 13 01:37:17 2013] Updating counts from extracted products
[Thu Jun 13 01:37:17 2013] Set source signif. to 45.32/7.85 = 5.77
[Thu Jun 13 01:37:18 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 13 01:37:18 2013] Using photon index=1.80, rate=0.0016, arf fullrun_mos2_xmm0678380901_pi300-10000_pass1_cl_src16.arf
[Thu Jun 13 01:37:18 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 13 01:37:18 2013] Updating source flux to 2.9e-14
[Thu Jun 13 01:37:21 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 13 01:37:22 2013] xmm0678380901/analysis//spectral/fullrun_mos2_xmm0678380901_pi300-10000_pass1_cl_src16_pl.csv not found, spectral fit skipped or did not complete