[Thu Jun 13 00:39:29 2013] Detection parameters:
  Position = (397.6, 269.9) = 16 44 0.96 57 31 10.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 56.8 +/- 9.3
  Background counts = 9.4
  Rate = 0.003 +/- 0.0006

[Thu Jun 13 00:39:29 2013] Off-axis axis estimate = 7.48'
[Thu Jun 13 00:39:52 2013] Using EEF radius (= 10.17 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 00:39:52 2013] Initial guess for spatial extent in simple fitting = 10.17"
[Thu Jun 13 00:39:52 2013] source mask rpix=2.3, npix_max = 32, mask sum = 19, frac = 0.590
[Thu Jun 13 00:39:52 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 10.17"
[Thu Jun 13 00:39:52 2013] fullrun_mos1_xmm0678380901_pi300-10000_cl_pass0_src6.ximg exists
[Thu Jun 13 00:39:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0678380901_pi300-10000_cl_pass0_src6.csv
[Thu Jun 13 00:39:52 2013] fullrun_mos1_xmm0678380901_pi300-10000_cl_pass0_src6_1.ximg exists
[Thu Jun 13 00:39:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0678380901_pi300-10000_cl_pass0_src6.csv
[Thu Jun 13 00:39:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0678380901_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0678380901_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 00:39:52 2013] fullrun_mos1_xmm0678380901_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Thu Jun 13 00:39:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0678380901_pi300-10000_cl_pass0_tfrozen_src6.csv
[Thu Jun 13 00:39:52 2013] fullrun_mos1_xmm0678380901_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Thu Jun 13 00:39:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0678380901_pi300-10000_cl_pass0_tfrozen_src6.csv
[Thu Jun 13 00:39:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0678380901_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0678380901_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 00:40:02 2013] Source 11 is offset by 2.925088 and 9.242256 pixels which is larger than
2 X fitted extent = 1.168713 x 1.168713, not incorporating fit results
[Thu Jun 13 00:40:03 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 00:40:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 00:40:03 2013] Assessing source extent using major
[Thu Jun 13 00:40:03 2013] Source does appear to be extended
[Thu Jun 13 00:40:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 00:40:14 2013] Using EEF radius (= 10.17 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 00:40:14 2013] Initial guess for spatial extent in simple fitting = 10.17"
[Thu Jun 13 00:40:14 2013] source mask rpix=2.3, npix_max = 32, mask sum = 19, frac = 0.590
[Thu Jun 13 00:40:14 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 10.17"
[Thu Jun 13 00:40:14 2013] fullrun_mos1_xmm0678380901_pi300-10000_cl_pass1_src6.ximg exists
[Thu Jun 13 00:40:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0678380901_pi300-10000_cl_pass1_src6.csv
[Thu Jun 13 00:40:14 2013] fullrun_mos1_xmm0678380901_pi300-10000_cl_pass1_src6_1.ximg exists
[Thu Jun 13 00:40:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0678380901_pi300-10000_cl_pass1_src6.csv
[Thu Jun 13 00:40:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0678380901_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0678380901_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 00:40:14 2013] fullrun_mos1_xmm0678380901_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Thu Jun 13 00:40:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0678380901_pi300-10000_cl_pass1_tfrozen_src6.csv
[Thu Jun 13 00:40:14 2013] fullrun_mos1_xmm0678380901_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Thu Jun 13 00:40:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0678380901_pi300-10000_cl_pass1_tfrozen_src6.csv
[Thu Jun 13 00:40:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0678380901_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0678380901_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 00:40:25 2013] Source 11 is offset by 4.565564 and 0.647661 pixels which is larger than
2 X fitted extent = 1.876092 x 1.168713, not incorporating fit results
[Thu Jun 13 00:40:25 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 00:40:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 00:40:25 2013] Assessing source extent using major
[Thu Jun 13 00:40:25 2013] Source does appear to be extended
[Thu Jun 13 00:40:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 00:40:44 2013] XMMSAS src. selection expression = ellipse(34539.156067, 23432.154297, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 13 00:40:44 2013] Not overwriting source region fullrun_mos1_xmm0678380901_pi300-10000_pass1_cl_src11_src.reg
[Thu Jun 13 00:40:44 2013] Extracting stamp from image fullrun_mos1_xmm0678380901_pi300-10000_cl_sm2.00.img.gz, (360, 232) - (435, 307)
[Thu Jun 13 00:40:44 2013] XMMSAS bgd. selection expression = annulus(34539.156067, 23432.154297, 1087.500000, 2175.000000, X, Y)
[Thu Jun 13 00:40:44 2013] Writing fullrun_mos1_xmm0678380901_pi300-10000_pass1_cl_src11.gif
[Thu Jun 13 00:40:44 2013] ../../xmm0678380901/products/events/fullrun_mos1_xmm0678380901_pi300-10000_pass1_cl_src11_src.evt and ../../xmm0678380901/products/events/fullrun_mos1_xmm0678380901_pi300-10000_pass1_cl_src11_bgd.evt exist, delete to re-create
[Thu Jun 13 00:40:44 2013] Mean detx,y = (-5221.35, 6883.23) 
[Thu Jun 13 00:40:44 2013] ../../xmm0678380901/products/images/fullrun_mos1_xmm0678380901_pi300-10000_pass1_cl_src11_src.img and ../../xmm0678380901/products/images/fullrun_mos1_xmm0678380901_pi300-10000_pass1_cl_src11_bgd.img exist, delete to re-create
[Thu Jun 13 00:40:44 2013] ../../xmm0678380901/products/spectra/fullrun_mos1_xmm0678380901_pi300-10000_pass1_cl_src11_src_b10.pi.gz and ../../xmm0678380901/products/spectra/fullrun_mos1_xmm0678380901_pi300-10000_pass1_cl_src11_bgd.pi exist, delete to re-create
[Thu Jun 13 00:40:44 2013] Setting source spectrum file to fullrun_mos1_xmm0678380901_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Thu Jun 13 00:40:44 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0678380901_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Thu Jun 13 00:40:44 2013] ../../xmm0678380901/products/lightcurves/fullrun_mos1_xmm0678380901_pi300-10000_pass1_cl_src11_src.lc and ../../xmm0678380901/products/lightcurves/fullrun_mos1_xmm0678380901_pi300-10000_pass1_cl_src11_bgd.lc exist, delete to re-create
[Thu Jun 13 01:24:45 2013] Not generating rmf since there are only 56 counts
[Thu Jun 13 01:24:45 2013] rmf not generated due to insufficient counts
[Thu Jun 13 01:37:14 2013] Updating aperture counts using extracted products
[Thu Jun 13 01:37:14 2013] Total counts from fullrun_mos1_xmm0678380901_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 94.00
[Thu Jun 13 01:37:14 2013] Total counts from fullrun_mos1_xmm0678380901_pi300-10000_pass1_cl_src11_bgd.pi.gz = 304.00
[Thu Jun 13 01:37:14 2013] Got source and background scale factors 924138.000000, 5753324.000000
[Thu Jun 13 01:37:14 2013] User source parameters:
  Position = (397.6, 269.9) = 16 44 0.96 57 31 10.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 45.2 +/- 10.7
  Background aperture counts = 48.8
  Rate = 0.002 +/- 0.0004

[Thu Jun 13 01:37:14 2013] Updating counts from extracted products
[Thu Jun 13 01:37:14 2013] Set source signif. to 45.17/6.99 = 6.46
[Thu Jun 13 01:37:16 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 13 01:37:16 2013] Using photon index=1.80, rate=0.00158, arf fullrun_mos1_xmm0678380901_pi300-10000_pass1_cl_src11.arf
[Thu Jun 13 01:37:16 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 13 01:37:16 2013] Updating source flux to 2.4e-14
[Thu Jun 13 01:37:20 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 13 01:37:21 2013] xmm0678380901/analysis//spectral/fullrun_mos1_xmm0678380901_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete