[Thu Jun 14 16:23:52 2012] Detection parameters:
  Position = (243.0, 101.0) = 16 45 6.64 57 20 3.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 136.6 +/- 23.5
  Background counts = 121.1
  Rate = 0.005 +/- 0.0009

[Thu Jun 14 16:23:52 2012] Off-axis axis estimate = 14.87'
[Thu Jun 14 16:26:05 2012] Using EEF radius (= 13.86 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 16:26:05 2012] Initial guess for spatial extent in simple fitting = 13.86"
[Thu Jun 14 16:26:05 2012] source mask rpix=3.2, npix_max = 54, mask sum = 64, frac = 1.177
[Thu Jun 14 16:26:05 2012] Giving source the simple spatial ID 22 for pass 0, mean size = 13.86"
[Thu Jun 14 17:46:13 2012] fullrun_pn_xmm0678380301_pi300-10000_cl_pass0_src22.ximg exists
[Thu Jun 14 17:46:13 2012] fullrun_pn_xmm0678380301_pi300-10000_cl_pass0_src22_1.ximg exists
[Thu Jun 14 17:46:13 2012] Fit fullrun_pn_xmm0678380301_pi300-10000_cl_pass0_src22 appears to have run properly
[Thu Jun 14 17:46:14 2012] fullrun_pn_xmm0678380301_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Thu Jun 14 17:46:14 2012] fullrun_pn_xmm0678380301_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Thu Jun 14 17:46:14 2012] Fit fullrun_pn_xmm0678380301_pi300-10000_cl_pass0_tfrozen_src22 appears to have run properly
[Thu Jun 14 17:57:15 2012] Warning, spatial fit 22 centroid is now closest to src. 21
[Thu Jun 14 17:57:15 2012] Spatial fit model total counts = 399.267000, observed total counts = 397.000000
[Thu Jun 14 17:57:15 2012] Offset between fit and detection position for source 22 = 3.086995 pixels
[Thu Jun 14 17:57:15 2012] Warning, changing simple spatial fit ID from 22 to 23
[Thu Jun 14 17:57:15 2012] 390.931900 total counts/ 321.996000 bgd. counts: snr = 3.841671
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 3.086995 pixels
  Position = (242.4, 98.0) = 16 45 6.98 57 19 50.5
  Extent = 27.9 (27.9-55.8)", rotation angle = 0
  Source counts = 68.9 +/- 19.8
  Background counts = 322.0
  Rate = 0.005 +/- 0.002
[Thu Jun 14 17:57:15 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 17:57:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 17:57:15 2012] Assessing source extent using major axis lower bound
[Thu Jun 14 17:57:15 2012] Source does appear to be extended
[Thu Jun 14 17:57:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 17:57:15 2012] Source is confused with source 3
[Thu Jun 14 17:57:21 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 14 17:57:21 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 14 17:57:21 2012] Initial guess for spatial extent in simple fitting = 27.92"
[Thu Jun 14 17:57:21 2012] source mask rpix=6.4, npix_max = 191, mask sum = 196, frac = 1.023
[Thu Jun 14 17:57:21 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 27.92"
[Thu Jun 14 19:10:59 2012] fullrun_pn_xmm0678380301_pi300-10000_cl_pass1_src19.ximg exists
[Thu Jun 14 19:10:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0678380301_pi300-10000_cl_pass1_src19.csv
[Thu Jun 14 19:10:59 2012] fullrun_pn_xmm0678380301_pi300-10000_cl_pass1_src19_1.ximg exists
[Thu Jun 14 19:10:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0678380301_pi300-10000_cl_pass1_src19.csv
[Thu Jun 14 19:10:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0678380301_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0678380301_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 19:10:59 2012] fullrun_pn_xmm0678380301_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Thu Jun 14 19:10:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0678380301_pi300-10000_cl_pass1_tfrozen_src19.csv
[Thu Jun 14 19:10:59 2012] fullrun_pn_xmm0678380301_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Thu Jun 14 19:10:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0678380301_pi300-10000_cl_pass1_tfrozen_src19.csv
[Thu Jun 14 19:10:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0678380301_pi300-10000_cl_pass1_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0678380301_pi300-10000_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 19:19:09 2012] Warning, spatial fit 19 centroid is now closest to src. 3
[Thu Jun 14 19:19:09 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 19:19:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 19:19:09 2012] Assessing source extent using major axis lower bound
[Thu Jun 14 19:19:09 2012] Source does appear to be extended
[Thu Jun 14 19:19:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 19:19:17 2012] XMMSAS src. selection expression = ellipse(21039.596000, 8473.961000, 1675.428048, 1675.428048, 0.000000, X, Y)
[Thu Jun 14 19:19:17 2012] Writing source region out to fullrun_pn_xmm0678380301_pi300-10000_pass1_cl_src22_src.reg
[Thu Jun 14 19:19:17 2012] Extracting stamp from image fullrun_pn_xmm0678380301_pi300-10000_cl_sm2.00.img.gz, (146, 2) - (339, 194)
[Thu Jun 14 19:19:17 2012] XMMSAS bgd. selection expression = annulus(21039.596000, 8473.961000, 2792.380080, 5584.760161, X, Y) && !ellipse(20335.813995, 9689.566010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21115.118195, 9704.959206, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20263.141861, 9265.743019, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19846.607590, 10572.767479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19900.379898, 9978.638298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21997.551697, 9274.442886, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22454.262000, 8591.976000, 2233.904064, 2233.904064, 0.000000, X, Y) && !ellipse(20839.400040, 7519.071594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21316.048157, 7688.344978, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21090.776886, 6922.635857, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 14 19:19:17 2012] Writing fullrun_pn_xmm0678380301_pi300-10000_pass1_cl_src22.gif
[Thu Jun 14 19:28:06 2012] Mean detx,y = (-16208.30, -8126.51) 
[Thu Jun 14 19:28:08 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 14 19:28:46 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 14 19:28:46 2012] Setting source spectrum file to fullrun_pn_xmm0678380301_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Thu Jun 14 19:28:46 2012] Setting bgd. spectrum file to fullrun_pn_xmm0678380301_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Thu Jun 14 19:42:32 2012] Not generating rmf since there are only 68 counts
[Thu Jun 14 19:42:32 2012] rmf not generated due to insufficient counts
[Thu Jun 14 20:01:01 2012] Updating aperture counts using extracted products
[Thu Jun 14 20:01:01 2012] Error reading totcts from fullrun_pn_xmm0678380301_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Thu Jun 14 20:01:02 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 20:01:02 2012] Using photon index=1.80, rate=0.00524, arf fullrun_pn_xmm0678380301_pi300-10000_pass1_cl_src22.arf
[Thu Jun 14 20:01:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 20:01:02 2012] Updating source flux to 7.3e-14
[Thu Jun 14 20:01:30 2012] Flag c found in src. 22 procflags, skipping spectral fitting
[Thu Jun 14 20:01:30 2012] Source 22 has fewer than 100.000000 counts, skipping spectral fitting