[Thu Jun 14 16:23:51 2012] Detection parameters:
  Position = (274.6, 306.7) = 16 44 49.78 57 34 58.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 23017.9 +/- 180.6
  Background counts = 264.6
  Rate = 0.9 +/- 0.007

[Thu Jun 14 16:23:52 2012] Off-axis axis estimate = 1.83'
[Thu Jun 14 16:26:05 2012] Using EEF radius (= 7.34 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 16:26:05 2012] Initial guess for spatial extent in simple fitting = 7.34"
[Thu Jun 14 16:26:05 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.044
[Thu Jun 14 16:26:05 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.34"
[Thu Jun 14 17:46:13 2012] fullrun_pn_xmm0678380301_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jun 14 17:46:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0678380301_pi300-10000_cl_pass0_src1.csv
[Thu Jun 14 17:46:13 2012] fullrun_pn_xmm0678380301_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jun 14 17:46:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0678380301_pi300-10000_cl_pass0_src1.csv
[Thu Jun 14 17:46:13 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0678380301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0678380301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 17:46:14 2012] fullrun_pn_xmm0678380301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jun 14 17:46:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0678380301_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu Jun 14 17:46:14 2012] fullrun_pn_xmm0678380301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jun 14 17:46:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0678380301_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu Jun 14 17:46:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0678380301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0678380301_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 17:57:15 2012] Warning, spatial fit 1 centroid is now closest to src. 11
[Thu Jun 14 17:57:15 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 17:57:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 17:57:15 2012] Assessing source extent using major
[Thu Jun 14 17:57:15 2012] Source does appear to be extended
[Thu Jun 14 17:57:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 17:57:21 2012] Using EEF radius (= 7.34 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 17:57:21 2012] Initial guess for spatial extent in simple fitting = 7.34"
[Thu Jun 14 17:57:21 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.044
[Thu Jun 14 17:57:21 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.34"
[Thu Jun 14 19:10:58 2012] fullrun_pn_xmm0678380301_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jun 14 19:10:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0678380301_pi300-10000_cl_pass1_src1.csv
[Thu Jun 14 19:10:58 2012] fullrun_pn_xmm0678380301_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jun 14 19:10:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0678380301_pi300-10000_cl_pass1_src1.csv
[Thu Jun 14 19:10:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0678380301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0678380301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 19:10:59 2012] fullrun_pn_xmm0678380301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jun 14 19:10:59 2012] fullrun_pn_xmm0678380301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jun 14 19:10:59 2012] Fit fullrun_pn_xmm0678380301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Jun 14 19:19:09 2012] Spatial fit model total counts = 10158.900000, observed total counts = 9942.000000
[Thu Jun 14 19:19:09 2012] Offset between fit and detection position for source 1 = 0.210101 pixels
[Thu Jun 14 19:19:09 2012] 10166.270000 total counts/ 2477.250000 bgd. counts: snr = 154.484913
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.210101 pixels
  Position = (274.5, 306.5) = 16 44 49.80 57 34 57.9
  Extent = 5.7 (5.6-5.8)", rotation angle = 0
  Source counts = 7689.0 +/- 100.8
  Background counts = 2477.2
  Rate = 0.6 +/- 0.008
[Thu Jun 14 19:19:09 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 19:19:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 19:19:09 2012] Assessing source extent using major axis lower bound
[Thu Jun 14 19:19:09 2012] Source does appear to be extended
[Thu Jun 14 19:19:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 19:19:17 2012] Counts = 7689.020000, rescaling region sizes by 2.000000
[Thu Jun 14 19:19:17 2012] XMMSAS src. selection expression = ellipse(23836.497800, 26618.396800, 681.993620, 681.993620, 0.000000, X, Y)
[Thu Jun 14 19:19:17 2012] Writing source region out to fullrun_pn_xmm0678380301_pi300-10000_pass1_cl_src1_src.reg
[Thu Jun 14 19:19:17 2012] Extracting stamp from image fullrun_pn_xmm0678380301_pi300-10000_cl_sm2.00.img.gz, (235, 267) - (314, 346)
[Thu Jun 14 19:19:17 2012] XMMSAS bgd. selection expression = annulus(23836.497800, 26618.396800, 2273.312065, 4546.624131, X, Y) && !ellipse(21431.135712, 29856.361420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28345.571200, 28135.348000, 374.397611, 374.397611, 0.000000, X, Y) && !ellipse(28284.840600, 27799.251600, 1219.864035, 383.316011, 97.797610, X, Y) && !ellipse(21800.120180, 24575.757800, 511.041652, 511.041652, 0.000000, X, Y) && !ellipse(26045.112160, 21830.828400, 364.068010, 364.068010, 0.000000, X, Y)
[Thu Jun 14 19:19:17 2012] Writing fullrun_pn_xmm0678380301_pi300-10000_pass1_cl_src1.gif
[Thu Jun 14 19:19:30 2012] Mean detx,y = (234.75, -296.97) 
[Thu Jun 14 19:19:33 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 14 19:20:43 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 14 19:20:43 2012] Setting source spectrum file to fullrun_pn_xmm0678380301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jun 14 19:20:43 2012] Setting bgd. spectrum file to fullrun_pn_xmm0678380301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Jun 14 20:01:01 2012] Updating aperture counts using extracted products
[Thu Jun 14 20:01:01 2012] Error reading totcts from fullrun_pn_xmm0678380301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jun 14 20:01:01 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 20:01:01 2012] Using photon index=1.80, rate=0.584, arf fullrun_pn_xmm0678380301_pi300-10000_pass1_cl_src1.arf
[Thu Jun 14 20:01:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 20:01:01 2012] Updating source flux to 1.5e-12
[Thu Jun 14 20:01:53 2012] Reading fit data from xmm0678380301/analysis//spectral/fullrun_pn_xmm0678380301_pi300-10000_pass1_cl_src1_pl.csv
[Thu Jun 14 20:01:53 2012] Spectral fit parameter nH value = 7.63138e+21
[Thu Jun 14 20:01:53 2012] Spectral fit parameter PhoIndex value = 2.0305
[Thu Jun 14 20:01:53 2012] Failed to get F(0.3-8.0) from xmm0678380301/analysis//spectral/fullrun_pn_xmm0678380301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Jun 14 20:01:53 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 20:01:53 2012] Using Nh = 7.6e+21, photon index=2.03, rate=0.584, arf fullrun_pn_xmm0678380301_pi300-10000_pass1_cl_src1.arf
[Thu Jun 14 20:01:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 20:01:53 2012] Updating source flux to 2.7e-12