[Wed May 30 13:26:52 2012] Detection parameters: Position = (174.4, 202.8) = 7 25 6.99 -59 9 56.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 550.1 +/- 27.6 Background counts = 7.9 Rate = 0.03 +/- 0.001 [Wed May 30 13:26:53 2012] Off-axis axis estimate = 11.35' [Wed May 30 13:28:41 2012] Using EEF radius (= 12.10 ")to estimate initial spatial extent for simple fitting [Wed May 30 13:28:41 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Wed May 30 13:28:41 2012] Initial guess for spatial extent in simple fitting = 12.10" [Wed May 30 13:28:41 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.974 [Wed May 30 13:28:41 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.10" [Wed May 30 13:44:54 2012] fullrun_pn_xmm0677981201_pi300-10000_cl_pass0_src1.ximg exists [Wed May 30 13:44:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677981201_pi300-10000_cl_pass0_src1.csv [Wed May 30 13:44:54 2012] fullrun_pn_xmm0677981201_pi300-10000_cl_pass0_src1_1.ximg exists [Wed May 30 13:44:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677981201_pi300-10000_cl_pass0_src1.csv [Wed May 30 13:44:54 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0677981201_pi300-10000_cl_pass0_src1_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0677981201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 30 13:44:54 2012] fullrun_pn_xmm0677981201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists [Wed May 30 13:44:54 2012] fullrun_pn_xmm0677981201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists [Wed May 30 13:44:54 2012] Fit fullrun_pn_xmm0677981201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly [Wed May 30 13:57:35 2012] Spatial fit model total counts = 659.563000, observed total counts = 611.000000 [Wed May 30 13:57:35 2012] Offset between fit and detection position for source 1 = 0.211947 pixels [Wed May 30 13:57:35 2012] 661.723000 total counts/ 234.495000 bgd. counts: snr = 27.899275 Spatial fit parameters: Offset between fit and detection position for source 1 = 0.211947 pixels Position = (174.6, 202.7) = 7 25 6.88 -59 9 55.9 Extent = 6.2 (5.8-6.7)", rotation angle = 0 Source counts = 427.2 +/- 25.7 Background counts = 234.5 Rate = 0.02 +/- 0.001 [Wed May 30 13:57:35 2012] Vigneting correction estimate = 1.000000 [Wed May 30 13:57:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 30 13:57:35 2012] Assessing source extent using major axis lower bound [Wed May 30 13:57:35 2012] Source does appear to be extended [Wed May 30 13:57:35 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 30 13:57:40 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Wed May 30 13:57:40 2012] Initial guess for spatial extent in simple fitting = 6.23" [Wed May 30 13:57:40 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.071 [Wed May 30 13:57:40 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.23" [Wed May 30 14:14:49 2012] fullrun_pn_xmm0677981201_pi300-10000_cl_pass1_src1.ximg exists [Wed May 30 14:14:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677981201_pi300-10000_cl_pass1_src1.csv [Wed May 30 14:14:49 2012] fullrun_pn_xmm0677981201_pi300-10000_cl_pass1_src1_1.ximg exists [Wed May 30 14:14:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677981201_pi300-10000_cl_pass1_src1.csv [Wed May 30 14:14:49 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0677981201_pi300-10000_cl_pass1_src1_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0677981201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 30 14:14:49 2012] fullrun_pn_xmm0677981201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists [Wed May 30 14:14:49 2012] fullrun_pn_xmm0677981201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists [Wed May 30 14:14:49 2012] Fit fullrun_pn_xmm0677981201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly [Wed May 30 14:27:38 2012] Spatial fit model total counts = 580.431000, observed total counts = 551.000000 [Wed May 30 14:27:38 2012] Offset between fit and detection position for source 1 = 0.030331 pixels [Wed May 30 14:27:38 2012] 585.351000 total counts/ 175.109000 bgd. counts: snr = 31.001727 Spatial fit parameters: Offset between fit and detection position for source 1 = 0.030331 pixels Position = (174.6, 202.7) = 7 25 6.90 -59 9 56.0 Extent = 6.0 (5.5-6.5)", rotation angle = 0 Source counts = 410.2 +/- 24.2 Background counts = 175.1 Rate = 0.02 +/- 0.001 [Wed May 30 14:27:38 2012] Vigneting correction estimate = 1.000000 [Wed May 30 14:27:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 30 14:27:38 2012] Assessing source extent using major axis lower bound [Wed May 30 14:27:38 2012] Source does appear to be extended [Wed May 30 14:27:38 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 30 14:27:44 2012] XMMSAS src. selection expression = ellipse(15141.423600, 17584.809200, 358.861810, 358.861810, 0.000000, X, Y) [Wed May 30 14:27:44 2012] Writing source region out to fullrun_pn_xmm0677981201_pi300-10000_pass1_cl_src1_src.reg [Wed May 30 14:27:44 2012] Extracting stamp from image fullrun_pn_xmm0677981201_pi300-10000_cl_sm2.00.img.gz, (154, 182) - (195, 223) [Wed May 30 14:27:44 2012] XMMSAS bgd. selection expression = annulus(15141.423600, 17584.809200, 598.103017, 1196.206034, X, Y) [Wed May 30 14:27:44 2012] Writing fullrun_pn_xmm0677981201_pi300-10000_pass1_cl_src1.gif [Wed May 30 14:27:56 2012] Mean detx,y = (-1750.91, -12133.19) [Wed May 30 14:27:59 2012] Setting backscal keywords in source and bgd. spectrum [Wed May 30 14:28:24 2012] Binned source spectrum to 10 counts/bin [Wed May 30 14:28:25 2012] Setting source spectrum file to fullrun_pn_xmm0677981201_pi300-10000_pass1_cl_src1_src_b10.pi.gz [Wed May 30 14:28:25 2012] Setting bgd. spectrum file to fullrun_pn_xmm0677981201_pi300-10000_pass1_cl_src1_bgd.pi.gz [Wed May 30 14:52:59 2012] Updating aperture counts using extracted products [Wed May 30 14:52:59 2012] Error reading totcts from fullrun_pn_xmm0677981201_pi300-10000_pass1_cl_src1_src_b10.pi.gz [Wed May 30 14:53:00 2012] Calculating source flux in energy range 0.30-8.00 [Wed May 30 14:53:00 2012] Using photon index=1.80, rate=0.0209, arf fullrun_pn_xmm0677981201_pi300-10000_pass1_cl_src1.arf [Wed May 30 14:53:00 2012] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 30 14:53:00 2012] Updating source flux to 1.6e-13 [Wed May 30 14:53:22 2012] Reading fit data from xmm0677981201/analysis//spectral/fullrun_pn_xmm0677981201_pi300-10000_pass1_cl_src1_pl.csv [Wed May 30 14:53:22 2012] Spectral fit parameter nH value = 2.10151e+21 [Wed May 30 14:53:22 2012] Spectral fit parameter PhoIndex value = 2.65382 [Wed May 30 14:53:22 2012] Failed to get F(0.3-8.0) from xmm0677981201/analysis//spectral/fullrun_pn_xmm0677981201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected [Wed May 30 14:53:22 2012] Calculating source flux in energy range 0.30-8.00 [Wed May 30 14:53:22 2012] Using Nh = 2.1e+21, photon index=2.65, rate=0.0209, arf fullrun_pn_xmm0677981201_pi300-10000_pass1_cl_src1.arf [Wed May 30 14:53:22 2012] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 30 14:53:22 2012] Updating source flux to 1.6e-13