[Wed May 30 13:27:23 2012] Detection parameters:
  Position = (187.2, 226.3) = 7 24 59.72 -59 8 13.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 31.9 +/- 7.1
  Background counts = 2.5
  Rate = 0.001 +/- 0.0003

[Wed May 30 13:27:23 2012] Off-axis axis estimate = 9.61'
[Wed May 30 13:49:47 2012] Using EEF radius (= 11.24 ")to estimate initial spatial extent for simple fitting
[Wed May 30 13:49:47 2012] Initial guess for spatial extent in simple fitting = 11.24"
[Wed May 30 13:49:47 2012] source mask rpix=2.6, npix_max = 38, mask sum = 35, frac = 0.921
[Wed May 30 13:49:47 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 11.24"
[Wed May 30 13:57:33 2012] fullrun_mos2_xmm0677981201_pi300-10000_cl_pass0_src3.ximg exists
[Wed May 30 13:57:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0677981201_pi300-10000_cl_pass0_src3.csv
[Wed May 30 13:57:33 2012] fullrun_mos2_xmm0677981201_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed May 30 13:57:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0677981201_pi300-10000_cl_pass0_src3.csv
[Wed May 30 13:57:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0677981201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0677981201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 13:57:33 2012] fullrun_mos2_xmm0677981201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed May 30 13:57:33 2012] fullrun_mos2_xmm0677981201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed May 30 13:57:33 2012] Fit fullrun_mos2_xmm0677981201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed May 30 13:57:36 2012] Spatial fit model total counts = 56.671600, observed total counts = 56.000000
[Wed May 30 13:57:36 2012] Offset between fit and detection position for source 2 = 0.116703 pixels
[Wed May 30 13:57:36 2012] 55.745600 total counts/ 36.505300 bgd. counts: snr = 3.184446
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.116703 pixels
  Position = (187.3, 226.4) = 7 24 59.67 -59 8 13.1
  Extent = 4.4 (2.8-6.5)", rotation angle = 0
  Source counts = 19.2 +/- 7.5
  Background counts = 36.5
  Rate = 0.0009 +/- 0.0004
[Wed May 30 13:57:36 2012] Vigneting correction estimate = 1.000000
[Wed May 30 13:57:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 13:57:36 2012] Assessing source extent using major axis lower bound
[Wed May 30 13:57:36 2012] Source does appear to be extended
[Wed May 30 13:57:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 14:19:48 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 30 14:19:48 2012] Initial guess for spatial extent in simple fitting = 4.44"
[Wed May 30 14:19:48 2012] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.974
[Wed May 30 14:19:48 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 4.44"
[Wed May 30 14:27:36 2012] fullrun_mos2_xmm0677981201_pi300-10000_cl_pass1_src3.ximg exists
[Wed May 30 14:27:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0677981201_pi300-10000_cl_pass1_src3.csv
[Wed May 30 14:27:36 2012] fullrun_mos2_xmm0677981201_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed May 30 14:27:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0677981201_pi300-10000_cl_pass1_src3.csv
[Wed May 30 14:27:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0677981201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0677981201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 14:27:36 2012] fullrun_mos2_xmm0677981201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed May 30 14:27:36 2012] fullrun_mos2_xmm0677981201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed May 30 14:27:36 2012] Fit fullrun_mos2_xmm0677981201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Wed May 30 14:27:39 2012] Spatial fit model total counts = 56.713900, observed total counts = 56.000000
[Wed May 30 14:27:39 2012] Offset between fit and detection position for source 2 = 0.005484 pixels
[Wed May 30 14:27:39 2012] 55.788100 total counts/ 36.529300 bgd. counts: snr = 3.186461
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.005484 pixels
  Position = (187.3, 226.4) = 7 24 59.67 -59 8 13.1
  Extent = 4.4 (2.7-8.2)", rotation angle = 0
  Source counts = 19.3 +/- 7.5
  Background counts = 36.5
  Rate = 0.0009 +/- 0.0004
[Wed May 30 14:27:39 2012] Vigneting correction estimate = 1.000000
[Wed May 30 14:27:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 14:27:39 2012] Assessing source extent using major axis lower bound
[Wed May 30 14:27:39 2012] Source does appear to be extended
[Wed May 30 14:27:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 14:47:22 2012] XMMSAS src. selection expression = ellipse(16244.392800, 19646.211600, 265.838408, 265.838408, 0.000000, X, Y)
[Wed May 30 14:47:22 2012] Writing source region out to fullrun_mos2_xmm0677981201_pi300-10000_pass1_cl_src2_src.reg
[Wed May 30 14:47:22 2012] Extracting stamp from image fullrun_mos2_xmm0677981201_pi300-10000_cl_sm2.00.img.gz, (172, 211) - (203, 242)
[Wed May 30 14:47:22 2012] XMMSAS bgd. selection expression = annulus(16244.392800, 19646.211600, 443.064013, 886.128025, X, Y)
[Wed May 30 14:47:22 2012] Writing fullrun_mos2_xmm0677981201_pi300-10000_pass1_cl_src2.gif
[Wed May 30 14:47:49 2012] Mean detx,y = (884.12, 9896.54) 
[Wed May 30 14:47:50 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 30 14:47:57 2012] Binned source spectrum to 10 counts/bin
[Wed May 30 14:47:58 2012] Setting source spectrum file to fullrun_mos2_xmm0677981201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed May 30 14:47:58 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0677981201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed May 30 14:52:09 2012] Not generating rmf since there are only 19 counts
[Wed May 30 14:52:09 2012] rmf not generated due to insufficient counts
[Wed May 30 14:53:00 2012] Updating aperture counts using extracted products
[Wed May 30 14:53:00 2012] Error reading totcts from fullrun_mos2_xmm0677981201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed May 30 14:53:00 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 30 14:53:00 2012] Using photon index=1.80, rate=0.000911, arf fullrun_mos2_xmm0677981201_pi300-10000_pass1_cl_src2.arf
[Wed May 30 14:53:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 30 14:53:00 2012] Updating source flux to 2.3e-14
[Wed May 30 14:53:07 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting