[Tue Apr 10 13:15:57 2012] Detection parameters:
  Position = (310.0, 396.2) = 13 29 58.61 47 15 27.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 44.0 +/- 10.1
  Background counts = 9.3
  Rate = 0.005 +/- 0.001

[Tue Apr 10 13:15:57 2012] Off-axis axis estimate = 7.14'
[Tue Apr 10 13:16:15 2012] Using EEF radius (= 10.00 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 13:16:15 2012] Initial guess for spatial extent in simple fitting = 10.00"
[Tue Apr 10 13:16:15 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.149
[Tue Apr 10 13:16:15 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 10.00"
[Tue Apr 10 13:16:15 2012] fullrun_mos2_xmm0677980701_pi300-10000_cl_pass0_src15.ximg exists
[Tue Apr 10 13:16:15 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0677980701_pi300-10000_cl_pass0_src15.csv
[Tue Apr 10 13:16:15 2012] fullrun_mos2_xmm0677980701_pi300-10000_cl_pass0_src15_1.ximg exists
[Tue Apr 10 13:16:15 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0677980701_pi300-10000_cl_pass0_src15.csv
[Tue Apr 10 13:16:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0677980701_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0677980701_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 13:16:15 2012] fullrun_mos2_xmm0677980701_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Tue Apr 10 13:16:15 2012] fullrun_mos2_xmm0677980701_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Tue Apr 10 13:16:15 2012] Fit fullrun_mos2_xmm0677980701_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Tue Apr 10 13:16:27 2012] Source 16 is offset by -4.578278 and 8.435265 pixels which is larger than
2 X fitted extent = 2.825389 x 2.825389, not incorporating fit results
[Tue Apr 10 13:16:27 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 13:16:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 13:16:27 2012] Assessing source extent using major
[Tue Apr 10 13:16:27 2012] Source does appear to be extended
[Tue Apr 10 13:16:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 13:16:27 2012] Source is confused with source 13
[Tue Apr 10 13:16:37 2012] Using EEF radius (= 10.00 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 13:16:37 2012] Initial guess for spatial extent in simple fitting = 10.00"
[Tue Apr 10 13:16:37 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.149
[Tue Apr 10 13:16:37 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 10.00"
[Tue Apr 10 13:16:38 2012] fullrun_mos2_xmm0677980701_pi300-10000_cl_pass1_src15.ximg exists
[Tue Apr 10 13:16:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0677980701_pi300-10000_cl_pass1_src15.csv
[Tue Apr 10 13:16:38 2012] fullrun_mos2_xmm0677980701_pi300-10000_cl_pass1_src15_1.ximg exists
[Tue Apr 10 13:16:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0677980701_pi300-10000_cl_pass1_src15.csv
[Tue Apr 10 13:16:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0677980701_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0677980701_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 13:16:38 2012] fullrun_mos2_xmm0677980701_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Tue Apr 10 13:16:38 2012] fullrun_mos2_xmm0677980701_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Tue Apr 10 13:16:38 2012] Fit fullrun_mos2_xmm0677980701_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Tue Apr 10 13:16:50 2012] Spatial fit model total counts = 333.107000, observed total counts = 331.000000
[Tue Apr 10 13:16:50 2012] Offset between fit and detection position for source 16 = 6.472407 pixels
[Tue Apr 10 13:16:50 2012] Warning, changing simple spatial fit ID from 15 to 14
[Tue Apr 10 13:16:50 2012] 330.496900 total counts/ 49.297900 bgd. counts: snr = 40.049727
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 6.472407 pixels
  Position = (308.6, 402.6) = 13 29 59.22 47 16 1.4
  Extent = 21.0 (18.8-41.9)" x 16.3 (13.2-19.8)", rotation angle = 232 (201-254) degrees
  Source counts = 281.2 +/- 18.2
  Background counts = 49.3
  Rate = 0.03 +/- 0.002
[Tue Apr 10 13:16:50 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 13:16:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 13:16:50 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 13:16:50 2012] Source does appear to be extended
[Tue Apr 10 13:16:50 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.95
[Tue Apr 10 13:17:08 2012] XMMSAS src. selection expression = ellipse(26796.240200, 34973.350000, 1257.204036, 976.344028, 232.310000, X, Y)
[Tue Apr 10 13:17:08 2012] Not overwriting source region fullrun_mos2_xmm0677980701_pi300-10000_pass1_cl_src16_src.reg
[Tue Apr 10 13:17:08 2012] Extracting stamp from image fullrun_mos2_xmm0677980701_pi300-10000_cl_sm2.00.img.gz, (236, 330) - (381, 475)
[Tue Apr 10 13:17:08 2012] XMMSAS bgd. selection expression = annulus(26796.240200, 34973.350000, 2095.340060, 4190.680121, X, Y) && !ellipse(26392.970000, 32193.774000, 385.184011, 385.184011, 0.000000, X, Y) && !ellipse(30725.423600, 30916.391000, 465.160813, 465.160813, 0.000000, X, Y) && !ellipse(26754.788200, 34962.837480, 872.752025, 872.752025, -0.000000, X, Y) && !ellipse(27873.605380, 33185.141800, 426.996012, 426.996012, 0.000000, X, Y) && !ellipse(25408.858124, 34564.609833, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25722.079895, 31710.198456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30985.112610, 38419.619446, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26678.339142, 35600.958038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27154.874000, 29890.414000, 1307.016038, 1307.016038, 0.000000, X, Y) && !ellipse(26151.804352, 31650.489502, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Apr 10 13:17:08 2012] Writing fullrun_mos2_xmm0677980701_pi300-10000_pass1_cl_src16.gif
[Tue Apr 10 13:17:09 2012] ../../xmm0677980701/products/events/fullrun_mos2_xmm0677980701_pi300-10000_pass1_cl_src16_src.evt and ../../xmm0677980701/products/events/fullrun_mos2_xmm0677980701_pi300-10000_pass1_cl_src16_bgd.evt exist, delete to re-create
[Tue Apr 10 13:17:09 2012] Mean detx,y = (-5458.33, 4505.79) 
[Tue Apr 10 13:17:09 2012] ../../xmm0677980701/products/images/fullrun_mos2_xmm0677980701_pi300-10000_pass1_cl_src16_src.img and ../../xmm0677980701/products/images/fullrun_mos2_xmm0677980701_pi300-10000_pass1_cl_src16_bgd.img exist, delete to re-create
[Tue Apr 10 13:17:09 2012] ../../xmm0677980701/products/spectra/fullrun_mos2_xmm0677980701_pi300-10000_pass1_cl_src16_src_b10.pi.gz and ../../xmm0677980701/products/spectra/fullrun_mos2_xmm0677980701_pi300-10000_pass1_cl_src16_bgd.pi exist, delete to re-create
[Tue Apr 10 13:17:09 2012] Setting source spectrum file to fullrun_mos2_xmm0677980701_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Tue Apr 10 13:17:09 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0677980701_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Tue Apr 10 13:17:09 2012] ../../xmm0677980701/products/lightcurves/fullrun_mos2_xmm0677980701_pi300-10000_pass1_cl_src16_src.lc and ../../xmm0677980701/products/lightcurves/fullrun_mos2_xmm0677980701_pi300-10000_pass1_cl_src16_bgd.lc exist, delete to re-create
[Tue Apr 10 13:17:10 2012] fullrun_mos2_xmm0677980701_pi300-10000_pass1_cl_src16.rmf exists, delete to re-create
[Tue Apr 10 13:17:10 2012] fullrun_mos2_xmm0677980701_pi300-10000_pass1_cl_src16.arf exists, delete to re-create
[Tue Apr 10 13:17:25 2012] Updating aperture counts using extracted products
[Tue Apr 10 13:17:25 2012] Error reading totcts from fullrun_mos2_xmm0677980701_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Tue Apr 10 13:17:25 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 13:17:25 2012] Using photon index=1.80, rate=0.026, arf fullrun_mos2_xmm0677980701_pi300-10000_pass1_cl_src16.arf
[Tue Apr 10 13:17:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 13:17:25 2012] Updating source flux to 3.4e-13
[Tue Apr 10 13:17:28 2012] Flag b found in src. 16 procflags, skipping spectral fitting
[Tue Apr 10 13:17:28 2012] Flag c found in src. 16 procflags, skipping spectral fitting