[Sun Jul 15 14:04:01 2012] Detection parameters:
  Position = (271.4, 286.8) = 14 12 25.09 2 22 4.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1443.2 +/- 46.6
  Background counts = 10.0
  Rate = 0.06 +/- 0.002

[Sun Jul 15 14:04:02 2012] Off-axis axis estimate = 2.14'
[Sun Jul 15 15:25:23 2012] Using EEF radius (= 7.50 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 15:25:23 2012] Initial guess for spatial extent in simple fitting = 7.50"
[Sun Jul 15 15:25:23 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.011
[Sun Jul 15 15:25:23 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.50"
[Sun Jul 15 15:54:00 2012] fullrun_mos1_xmm0677980501_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jul 15 15:54:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0677980501_pi300-10000_cl_pass0_src1.csv
[Sun Jul 15 15:54:00 2012] fullrun_mos1_xmm0677980501_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jul 15 15:54:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0677980501_pi300-10000_cl_pass0_src1.csv
[Sun Jul 15 15:54:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0677980501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0677980501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 15:54:00 2012] fullrun_mos1_xmm0677980501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jul 15 15:54:00 2012] fullrun_mos1_xmm0677980501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jul 15 15:54:00 2012] Fit fullrun_mos1_xmm0677980501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Jul 15 16:35:28 2012] Spatial fit model total counts = 1323.680000, observed total counts = 1324.000000
[Sun Jul 15 16:35:28 2012] Offset between fit and detection position for source 2 = 0.177440 pixels
[Sun Jul 15 16:35:28 2012] 1326.049000 total counts/ 301.489000 bgd. counts: snr = 59.006745
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.177440 pixels
  Position = (271.4, 286.6) = 14 12 25.07 2 22 3.4
  Extent = 5.6 (5.4-6.0)", rotation angle = 0
  Source counts = 1024.6 +/- 36.4
  Background counts = 301.5
  Rate = 0.04 +/- 0.001
[Sun Jul 15 16:35:28 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 16:35:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 16:35:28 2012] Assessing source extent using major axis lower bound
[Sun Jul 15 16:35:28 2012] Source does appear to be extended
[Sun Jul 15 16:35:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 17:41:13 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jul 15 17:41:13 2012] Initial guess for spatial extent in simple fitting = 5.65"
[Sun Jul 15 17:41:13 2012] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.696
[Sun Jul 15 17:41:13 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.65"
[Sun Jul 15 18:12:54 2012] fullrun_mos1_xmm0677980501_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jul 15 18:12:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0677980501_pi300-10000_cl_pass1_src1.csv
[Sun Jul 15 18:12:54 2012] fullrun_mos1_xmm0677980501_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jul 15 18:12:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0677980501_pi300-10000_cl_pass1_src1.csv
[Sun Jul 15 18:12:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0677980501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0677980501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 18:12:54 2012] fullrun_mos1_xmm0677980501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jul 15 18:12:54 2012] fullrun_mos1_xmm0677980501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jul 15 18:12:54 2012] Fit fullrun_mos1_xmm0677980501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Jul 15 18:53:15 2012] Spatial fit model total counts = 1323.740000, observed total counts = 1324.000000
[Sun Jul 15 18:53:15 2012] Offset between fit and detection position for source 2 = 0.000067 pixels
[Sun Jul 15 18:53:15 2012] 1326.111000 total counts/ 301.721000 bgd. counts: snr = 58.974268
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.000067 pixels
  Position = (271.4, 286.6) = 14 12 25.07 2 22 3.4
  Extent = 5.6 (5.4-6.0)", rotation angle = 0
  Source counts = 1024.4 +/- 36.4
  Background counts = 301.7
  Rate = 0.04 +/- 0.001
[Sun Jul 15 18:53:15 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 18:53:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 18:53:15 2012] Assessing source extent using major axis lower bound
[Sun Jul 15 18:53:15 2012] Source does appear to be extended
[Sun Jul 15 18:53:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 19:51:01 2012] Counts = 1024.390000, rescaling region sizes by 2.000000
[Sun Jul 15 19:51:01 2012] XMMSAS src. selection expression = ellipse(23565.448200, 24886.905600, 677.308819, 677.308819, 0.000000, X, Y)
[Sun Jul 15 19:51:01 2012] Writing source region out to fullrun_mos1_xmm0677980501_pi300-10000_pass1_cl_src2_src.reg
[Sun Jul 15 19:51:01 2012] Extracting stamp from image fullrun_mos1_xmm0677980501_pi300-10000_cl_sm2.00.img.gz, (232, 248) - (310, 326)
[Sun Jul 15 19:51:01 2012] XMMSAS bgd. selection expression = annulus(23565.448200, 24886.905600, 2257.696065, 4515.392130, X, Y) && !ellipse(24942.996063, 21467.273315, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24752.166620, 20681.349200, 360.736810, 360.736810, 0.000000, X, Y) && !ellipse(26349.234000, 27859.690000, 373.180011, 373.180011, 0.000000, X, Y) && !ellipse(23058.012107, 28969.128437, 534.853479, 351.320062, 47.951286, X, Y)
[Sun Jul 15 19:51:01 2012] Writing fullrun_mos1_xmm0677980501_pi300-10000_pass1_cl_src2.gif
[Sun Jul 15 19:51:04 2012] Mean detx,y = (-1493.06, -3934.65) 
[Sun Jul 15 19:51:05 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 15 19:51:56 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 15 19:51:57 2012] Setting source spectrum file to fullrun_mos1_xmm0677980501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Jul 15 19:51:57 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0677980501_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun Jul 15 20:20:29 2012] Updating aperture counts using extracted products
[Sun Jul 15 20:20:29 2012] Error reading totcts from fullrun_mos1_xmm0677980501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Jul 15 20:20:30 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 15 20:20:30 2012] Using photon index=1.80, rate=0.0364, arf fullrun_mos1_xmm0677980501_pi300-10000_pass1_cl_src2.arf
[Sun Jul 15 20:20:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 15 20:20:30 2012] Updating source flux to 5.2e-13
[Sun Jul 15 20:20:41 2012] Reading fit data from xmm0677980501/analysis//spectral/fullrun_mos1_xmm0677980501_pi300-10000_pass1_cl_src2_pl.csv
[Sun Jul 15 20:20:41 2012] Spectral fit parameter nH value = 4.81439e+19
[Sun Jul 15 20:20:41 2012] Spectral fit parameter PhoIndex value = 1.70183
[Sun Jul 15 20:20:41 2012] Failed to get F(0.3-8.0) from xmm0677980501/analysis//spectral/fullrun_mos1_xmm0677980501_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sun Jul 15 20:20:41 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 15 20:20:41 2012] Using Nh = 4.8e+19, photon index=1.70, rate=0.0364, arf fullrun_mos1_xmm0677980501_pi300-10000_pass1_cl_src2.arf
[Sun Jul 15 20:20:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 15 20:20:41 2012] Updating source flux to 5.4e-13