[Fri Feb 17 04:06:58 2012] Detection parameters:
  Position = (91.1, 323.0) = 1 4 56.76 -72 23 32.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 133.3 +/- 16.5
  Background counts = 20.3
  Rate = 0.007 +/- 0.0009

[Fri Feb 17 04:06:58 2012] Off-axis axis estimate = 15.14'
[Fri Feb 17 05:18:55 2012] Using EEF radius (= 14.00 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 05:18:55 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Feb 17 05:18:55 2012] Initial guess for spatial extent in simple fitting = 14.00"
[Fri Feb 17 05:18:55 2012] source mask rpix=3.2, npix_max = 55, mask sum = 48, frac = 0.868
[Fri Feb 17 05:18:55 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 14.00"
[Fri Feb 17 06:04:27 2012] fullrun_mos2_xmm0677980301_pi300-10000_cl_pass0_src11.ximg exists
[Fri Feb 17 06:04:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0677980301_pi300-10000_cl_pass0_src11.csv
[Fri Feb 17 06:04:27 2012] fullrun_mos2_xmm0677980301_pi300-10000_cl_pass0_src11_1.ximg exists
[Fri Feb 17 06:04:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0677980301_pi300-10000_cl_pass0_src11.csv
[Fri Feb 17 06:04:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0677980301_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0677980301_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 06:04:27 2012] fullrun_mos2_xmm0677980301_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Fri Feb 17 06:04:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0677980301_pi300-10000_cl_pass0_tfrozen_src11.csv
[Fri Feb 17 06:04:27 2012] fullrun_mos2_xmm0677980301_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Fri Feb 17 06:04:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0677980301_pi300-10000_cl_pass0_tfrozen_src11.csv
[Fri Feb 17 06:04:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0677980301_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0677980301_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 06:04:38 2012] Warning, spatial fit 11 centroid is now closest to src. 9
[Fri Feb 17 06:04:38 2012] Spatial fit model total counts = 200.920000, observed total counts = 387.000000
[Fri Feb 17 06:04:38 2012] Poor agreement between spatial fit and data for source 12
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Feb 17 06:04:38 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 06:04:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 06:04:38 2012] Assessing source extent using major
[Fri Feb 17 06:04:38 2012] Source does appear to be extended
[Fri Feb 17 06:04:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 06:04:38 2012] Source is confused with source 10
[Fri Feb 17 06:54:50 2012] Using EEF radius (= 14.00 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 06:54:50 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Feb 17 06:54:50 2012] Initial guess for spatial extent in simple fitting = 14.00"
[Fri Feb 17 06:54:50 2012] source mask rpix=3.2, npix_max = 55, mask sum = 48, frac = 0.868
[Fri Feb 17 06:54:50 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 14.00"
[Fri Feb 17 07:31:33 2012] fullrun_mos2_xmm0677980301_pi300-10000_cl_pass1_src11.ximg exists
[Fri Feb 17 07:31:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0677980301_pi300-10000_cl_pass1_src11.csv
[Fri Feb 17 07:31:33 2012] fullrun_mos2_xmm0677980301_pi300-10000_cl_pass1_src11_1.ximg exists
[Fri Feb 17 07:31:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0677980301_pi300-10000_cl_pass1_src11.csv
[Fri Feb 17 07:31:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0677980301_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0677980301_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 07:31:33 2012] fullrun_mos2_xmm0677980301_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Fri Feb 17 07:31:33 2012] fullrun_mos2_xmm0677980301_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Fri Feb 17 07:31:33 2012] Fit fullrun_mos2_xmm0677980301_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Fri Feb 17 07:31:39 2012] Warning, spatial fit 11 centroid is now closest to src. 16
[Fri Feb 17 07:31:39 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 07:31:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 07:31:39 2012] Assessing source extent using major
[Fri Feb 17 07:31:39 2012] Source does appear to be extended
[Fri Feb 17 07:31:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 08:05:15 2012] XMMSAS src. selection expression = ellipse(7878.084656, 28054.979797, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Feb 17 08:05:15 2012] Writing source region out to fullrun_mos2_xmm0677980301_pi300-10000_pass1_cl_src12_src.reg
[Fri Feb 17 08:05:15 2012] Extracting stamp from image fullrun_mos2_xmm0677980301_pi300-10000_cl_sm2.00.img.gz, (54, 286) - (129, 361)
[Fri Feb 17 08:05:15 2012] XMMSAS bgd. selection expression = annulus(7878.084656, 28054.979797, 1087.500000, 2175.000000, X, Y) && !ellipse(8659.597839, 28407.769470, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(7647.646034, 28563.240021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(7798.855927, 29000.321564, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(7843.611755, 27017.683746, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(8311.939011, 28837.135498, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Feb 17 08:05:15 2012] Writing fullrun_mos2_xmm0677980301_pi300-10000_pass1_cl_src12.gif
[Fri Feb 17 08:07:35 2012] Mean detx,y = (119.17, 16397.58) 
[Fri Feb 17 08:07:36 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Feb 17 08:07:50 2012] Binned source spectrum to 10 counts/bin
[Fri Feb 17 08:07:50 2012] Setting source spectrum file to fullrun_mos2_xmm0677980301_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Fri Feb 17 08:07:50 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0677980301_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Fri Feb 17 08:24:36 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Feb 17 08:24:36 2012] rmf not generated due to insufficient counts
[Fri Feb 17 08:25:55 2012] Updating aperture counts using extracted products
[Fri Feb 17 08:25:55 2012] Error reading totcts from fullrun_mos2_xmm0677980301_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Fri Feb 17 08:25:55 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 08:25:55 2012] Using photon index=1.80, rate=0.00736, arf fullrun_mos2_xmm0677980301_pi300-10000_pass1_cl_src12.arf
[Fri Feb 17 08:25:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 17 08:25:55 2012] Updating source flux to 4.6e-13
[Fri Feb 17 08:26:28 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting