[Fri Feb 17 04:06:37 2012] Detection parameters:
  Position = (89.0, 335.8) = 1 4 58.59 -72 22 32.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 147.2 +/- 18.6
  Background counts = 27.5
  Rate = 0.008 +/- 0.001

[Fri Feb 17 04:06:38 2012] Off-axis axis estimate = 15.42'
[Fri Feb 17 04:31:53 2012] Using EEF radius (= 14.14 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 04:31:53 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Feb 17 04:31:53 2012] Initial guess for spatial extent in simple fitting = 14.14"
[Fri Feb 17 04:31:53 2012] source mask rpix=3.3, npix_max = 56, mask sum = 51, frac = 0.906
[Fri Feb 17 04:31:53 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 14.14"
[Fri Feb 17 05:18:55 2012] fullrun_mos1_xmm0677980301_pi300-10000_cl_pass0_src7.ximg exists
[Fri Feb 17 05:18:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0677980301_pi300-10000_cl_pass0_src7.csv
[Fri Feb 17 05:18:55 2012] fullrun_mos1_xmm0677980301_pi300-10000_cl_pass0_src7_1.ximg exists
[Fri Feb 17 05:18:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0677980301_pi300-10000_cl_pass0_src7.csv
[Fri Feb 17 05:18:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0677980301_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0677980301_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 05:18:55 2012] fullrun_mos1_xmm0677980301_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Fri Feb 17 05:18:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0677980301_pi300-10000_cl_pass0_tfrozen_src7.csv
[Fri Feb 17 05:18:55 2012] fullrun_mos1_xmm0677980301_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Fri Feb 17 05:18:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0677980301_pi300-10000_cl_pass0_tfrozen_src7.csv
[Fri Feb 17 05:18:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0677980301_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0677980301_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 06:04:35 2012] Warning, spatial fit 7 centroid is now closest to src. 9
[Fri Feb 17 06:04:35 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 10.201609 pixels away
[Fri Feb 17 06:04:35 2012] Spatial fit model total counts = 507.396000, observed total counts = 507.000000
[Fri Feb 17 06:04:35 2012] Offset between fit and detection position for source 6 = 3.061685 pixels
[Fri Feb 17 06:04:35 2012] Warning, changing simple spatial fit ID from 7 to 14
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 3.061685 pixels
  Position = (91.4, 333.9) = 1 4 56.33 -72 22 47.8
  Extent = 22.1 (18.6-27.1)", rotation angle = 0
  Source counts = 368.0 +/- 19.2
  Background counts = 0.0
  Rate = 0.03 +/- 0.001
 Deleting source due to low signal-to-noise ratio