[Wed May  8 02:40:06 2013] Detection parameters:
  Position = (145.1, 301.3) = 23 18 27.76 -54 39 1.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 248.1 +/- 21.7
  Background counts = 18.0
  Rate = 0.009 +/- 0.0007

[Wed May  8 02:40:07 2013] Off-axis axis estimate = 11.12'
[Wed May  8 02:42:36 2013] Using EEF radius (= 11.99 ")to estimate initial spatial extent for simple fitting
[Wed May  8 02:42:36 2013] Initial guess for spatial extent in simple fitting = 11.99"
[Wed May  8 02:42:36 2013] source mask rpix=2.8, npix_max = 42, mask sum = 34, frac = 0.802
[Wed May  8 02:42:36 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 11.99"
[Wed May  8 03:25:06 2013] fullrun_pn_xmm0677850901_pi300-10000_cl_pass0_src2.ximg exists
[Wed May  8 03:25:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677850901_pi300-10000_cl_pass0_src2.csv
[Wed May  8 03:25:06 2013] fullrun_pn_xmm0677850901_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed May  8 03:25:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677850901_pi300-10000_cl_pass0_src2.csv
[Wed May  8 03:25:06 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0677850901_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0677850901_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 03:25:06 2013] fullrun_pn_xmm0677850901_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed May  8 03:25:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677850901_pi300-10000_cl_pass0_tfrozen_src2.csv
[Wed May  8 03:25:06 2013] fullrun_pn_xmm0677850901_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed May  8 03:25:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677850901_pi300-10000_cl_pass0_tfrozen_src2.csv
[Wed May  8 03:25:06 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0677850901_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0677850901_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 04:21:19 2013] Warning, spatial fit 2 centroid is now closest to src. 8
[Wed May  8 04:21:20 2013] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 13.245175 pixels away
[Wed May  8 04:21:20 2013] Vigneting correction estimate = 1.000000
[Wed May  8 04:21:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  8 04:21:20 2013] Assessing source extent using major
[Wed May  8 04:21:20 2013] Source does appear to be extended
[Wed May  8 04:21:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  8 04:21:36 2013] Using EEF radius (= 11.99 ")to estimate initial spatial extent for simple fitting
[Wed May  8 04:21:36 2013] Initial guess for spatial extent in simple fitting = 11.99"
[Wed May  8 04:21:36 2013] source mask rpix=2.8, npix_max = 42, mask sum = 34, frac = 0.802
[Wed May  8 04:21:36 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 11.99"
[Wed May  8 05:00:59 2013] fullrun_pn_xmm0677850901_pi300-10000_cl_pass1_src2.ximg exists
[Wed May  8 05:00:59 2013] fullrun_pn_xmm0677850901_pi300-10000_cl_pass1_src2_1.ximg exists
[Wed May  8 05:00:59 2013] Fit fullrun_pn_xmm0677850901_pi300-10000_cl_pass1_src2 appears to have run properly
[Wed May  8 05:01:00 2013] fullrun_pn_xmm0677850901_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Wed May  8 05:01:00 2013] fullrun_pn_xmm0677850901_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Wed May  8 05:01:00 2013] Fit fullrun_pn_xmm0677850901_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Wed May  8 05:49:57 2013] Spatial fit model total counts = 377.446000, observed total counts = 403.000000
[Wed May  8 05:49:57 2013] Offset between fit and detection position for source 2 = 0.534586 pixels
[Wed May  8 05:49:57 2013] 373.817800 total counts/ 285.674000 bgd. counts: snr = 5.215025
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.534586 pixels
  Position = (144.8, 301.8) = 23 18 27.92 -54 39 2.5
  Extent = 3.0" x 3.0", rotation angle = 0
  Source counts = 88.1 +/- 19.3
  Background counts = 285.7
  Rate = 0.003 +/- 0.0007
[Wed May  8 05:49:57 2013] Vigneting correction estimate = 1.000000
[Wed May  8 05:49:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  8 05:49:57 2013] Assessing source extent using major
[Wed May  8 05:49:57 2013] Source does appear to be extended
[Wed May  8 05:49:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  8 05:50:12 2013] XMMSAS src. selection expression = ellipse(12546.246400, 26204.734600, 179.835605, 179.835605, 0.000000, X, Y)
[Wed May  8 05:50:12 2013] Writing source region out to fullrun_pn_xmm0677850901_pi300-10000_pass1_cl_src2_src.reg
[Wed May  8 05:50:12 2013] Extracting stamp from image fullrun_pn_xmm0677850901_pi300-10000_cl_sm2.00.img.gz, (134, 291) - (155, 312)
[Wed May  8 05:50:12 2013] XMMSAS bgd. selection expression = annulus(12546.246400, 26204.734600, 299.726009, 599.452017, X, Y) && !ellipse(12173.587524, 26908.668243, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May  8 05:50:12 2013] Writing fullrun_pn_xmm0677850901_pi300-10000_pass1_cl_src2.gif
[Wed May  8 05:51:03 2013] Mean detx,y = (-7644.16, -2539.90) 
[Wed May  8 05:51:07 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May  8 05:51:20 2013] Binned source spectrum to 10 counts/bin
[Wed May  8 05:51:20 2013] Setting source spectrum file to fullrun_pn_xmm0677850901_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed May  8 05:51:20 2013] Setting bgd. spectrum file to fullrun_pn_xmm0677850901_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed May  8 06:11:49 2013] Not generating rmf since there are only 88 counts
[Wed May  8 06:11:49 2013] rmf not generated due to insufficient counts
[Wed May  8 06:41:18 2013] Updating aperture counts using extracted products
[Wed May  8 06:41:18 2013] Total counts from fullrun_pn_xmm0677850901_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 123.00
[Wed May  8 06:41:18 2013] Total counts from fullrun_pn_xmm0677850901_pi300-10000_pass1_cl_src2_bgd.pi.gz = 39.00
[Wed May  8 06:41:18 2013] Got source and background scale factors 44247.000000, 457600.000000
[Wed May  8 06:41:19 2013] User source parameters:
  Position = (144.8, 301.8) = 23 18 27.92 -54 39 2.5
  Extent = 3.0" x 3.0", rotation angle = 0
  Source aperture counts = 119.2 +/- 12.1
  Background aperture counts = 3.8
  Rate = 0.004 +/- 0.0004

[Wed May  8 06:41:25 2013] Calculating source flux in energy range 0.30-8.00
[Wed May  8 06:41:25 2013] Using photon index=1.80, rate=0.00303, arf fullrun_pn_xmm0677850901_pi300-10000_pass1_cl_src2.arf
[Wed May  8 06:41:25 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  8 06:41:25 2013] Updating source flux to 7.6e-14
[Wed May  8 06:41:34 2013] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Wed May  8 06:41:35 2013] xmm0677850901/analysis//spectral/fullrun_pn_xmm0677850901_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete