[Wed May 8 02:40:49 2013] Detection parameters: Position = (334.3, 229.5) = 23 16 52.90 -54 44 28.6 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 63.5 +/- 11.4 Background counts = 5.4 Rate = 0.002 +/- 0.0004 [Wed May 8 02:40:50 2013] Off-axis axis estimate = 5.63' [Wed May 8 03:54:33 2013] Using EEF radius (= 9.24 ")to estimate initial spatial extent for simple fitting [Wed May 8 03:54:33 2013] Initial guess for spatial extent in simple fitting = 9.24" [Wed May 8 03:54:33 2013] source mask rpix=2.1, npix_max = 27, mask sum = 15, frac = 0.544 [Wed May 8 03:54:33 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 9.24" [Wed May 8 04:21:12 2013] fullrun_mos2_xmm0677850901_pi300-10000_cl_pass0_src5.ximg exists [Wed May 8 04:21:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0677850901_pi300-10000_cl_pass0_src5.csv [Wed May 8 04:21:12 2013] fullrun_mos2_xmm0677850901_pi300-10000_cl_pass0_src5_1.ximg exists [Wed May 8 04:21:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0677850901_pi300-10000_cl_pass0_src5.csv [Wed May 8 04:21:12 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0677850901_pi300-10000_cl_pass0_src5_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0677850901_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 8 04:21:12 2013] fullrun_mos2_xmm0677850901_pi300-10000_cl_pass0_tfrozen_src5.ximg exists [Wed May 8 04:21:12 2013] fullrun_mos2_xmm0677850901_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists [Wed May 8 04:21:12 2013] Fit fullrun_mos2_xmm0677850901_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly [Wed May 8 04:21:27 2013] Spatial fit model total counts = 97.161300, observed total counts = 93.000000 [Wed May 8 04:21:27 2013] Offset between fit and detection position for source 3 = 1.104551 pixels [Wed May 8 04:21:27 2013] 97.604300 total counts/ 78.049000 bgd. counts: snr = 2.213507 Spatial fit parameters: Offset between fit and detection position for source 3 = 1.104551 pixels Position = (335.0, 228.7) = 23 16 52.53 -54 44 21.8 Extent = 3.8 (2.7-6.6)", rotation angle = 0 Source counts = 19.6 +/- 9.9 Background counts = 78.0 Rate = 0.0006 +/- 0.0003 [Wed May 8 04:21:27 2013] Vigneting correction estimate = 1.000000 [Wed May 8 04:21:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 8 04:21:27 2013] Assessing source extent using major axis lower bound [Wed May 8 04:21:27 2013] Source does appear to be extended [Wed May 8 04:21:27 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 8 05:26:40 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Wed May 8 05:26:40 2013] Initial guess for spatial extent in simple fitting = 3.84" [Wed May 8 05:26:40 2013] source mask rpix=0.9, npix_max = 7, mask sum = 2, frac = 0.261 [Wed May 8 05:26:40 2013] Skipping simple spatial due to low active detector fraction [Wed May 8 05:50:04 2013] Vigneting correction estimate = 1.000000 [Wed May 8 05:50:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 8 05:50:04 2013] Assessing source extent using major axis lower bound [Wed May 8 05:50:04 2013] Source does appear to be extended [Wed May 8 05:50:04 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 8 06:29:52 2013] XMMSAS src. selection expression = ellipse(29096.025800, 19847.576400, 230.536207, 230.536207, 0.000000, X, Y) [Wed May 8 06:29:52 2013] Writing source region out to fullrun_mos2_xmm0677850901_pi300-10000_pass1_cl_src3_src.reg [Wed May 8 06:29:52 2013] Extracting stamp from image fullrun_mos2_xmm0677850901_pi300-10000_cl_sm2.00.img.gz, (322, 215) - (348, 242) [Wed May 8 06:29:52 2013] XMMSAS bgd. selection expression = annulus(29096.025800, 19847.576400, 384.227011, 768.454022, X, Y) [Wed May 8 06:29:52 2013] Writing fullrun_mos2_xmm0677850901_pi300-10000_pass1_cl_src3.gif [Wed May 8 06:30:56 2013] Mean detx,y = (-3675.50, -6461.69) [Wed May 8 06:30:57 2013] Setting backscal keywords in source and bgd. spectrum [Wed May 8 06:31:09 2013] Binned source spectrum to 10 counts/bin [Wed May 8 06:31:09 2013] Setting source spectrum file to fullrun_mos2_xmm0677850901_pi300-10000_pass1_cl_src3_src_b10.pi.gz [Wed May 8 06:31:09 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0677850901_pi300-10000_pass1_cl_src3_bgd.pi.gz [Wed May 8 06:39:12 2013] Not generating rmf since there are only 19 counts [Wed May 8 06:39:12 2013] rmf not generated due to insufficient counts [Wed May 8 06:41:28 2013] Updating aperture counts using extracted products [Wed May 8 06:41:28 2013] Total counts from fullrun_mos2_xmm0677850901_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 36.00 [Wed May 8 06:41:29 2013] Total counts from fullrun_mos2_xmm0677850901_pi300-10000_pass1_cl_src3_bgd.pi.gz = 42.00 [Wed May 8 06:41:29 2013] Got source and background scale factors 143408.000000, 1154784.000000 [Wed May 8 06:41:29 2013] User source parameters: Position = (335.0, 228.7) = 23 16 52.53 -54 44 21.8 Extent = 3.8 (2.7-6.6)", rotation angle = 0 Source aperture counts = 30.8 +/- 7.1 Background aperture counts = 5.2 Rate = 0.001 +/- 0.0002 [Wed May 8 06:41:31 2013] Calculating source flux in energy range 0.30-8.00 [Wed May 8 06:41:31 2013] Using photon index=1.80, rate=0.000619, arf fullrun_mos2_xmm0677850901_pi300-10000_pass1_cl_src3.arf [Wed May 8 06:41:31 2013] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 8 06:41:31 2013] Updating source flux to 1.6e-14 [Wed May 8 06:41:33 2013] Source 3 has fewer than 100.000000 counts, skipping spectral fitting [Wed May 8 06:41:34 2013] xmm0677850901/analysis//spectral/fullrun_mos2_xmm0677850901_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete