[Wed May  8 02:40:28 2013] Detection parameters:
  Position = (491.9, 270.1) = 23 15 33.81 -54 41 18.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 47.1 +/- 9.2
  Background counts = 4.5
  Rate = 0.001 +/- 0.0003

[Wed May  8 02:40:28 2013] Off-axis axis estimate = 14.18'
[Wed May  8 03:25:06 2013] Using EEF radius (= 13.52 ")to estimate initial spatial extent for simple fitting
[Wed May  8 03:25:06 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May  8 03:25:06 2013] Initial guess for spatial extent in simple fitting = 13.52"
[Wed May  8 03:25:06 2013] source mask rpix=3.1, npix_max = 52, mask sum = 52, frac = 0.999
[Wed May  8 03:25:06 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 13.52"
[Wed May  8 03:54:33 2013] fullrun_mos1_xmm0677850901_pi300-10000_cl_pass0_src10.ximg exists
[Wed May  8 03:54:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0677850901_pi300-10000_cl_pass0_src10.csv
[Wed May  8 03:54:33 2013] fullrun_mos1_xmm0677850901_pi300-10000_cl_pass0_src10_1.ximg exists
[Wed May  8 03:54:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0677850901_pi300-10000_cl_pass0_src10.csv
[Wed May  8 03:54:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0677850901_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0677850901_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 03:54:33 2013] fullrun_mos1_xmm0677850901_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Wed May  8 03:54:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0677850901_pi300-10000_cl_pass0_tfrozen_src10.csv
[Wed May  8 03:54:33 2013] fullrun_mos1_xmm0677850901_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Wed May  8 03:54:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0677850901_pi300-10000_cl_pass0_tfrozen_src10.csv
[Wed May  8 03:54:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0677850901_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0677850901_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 04:21:23 2013] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 17.018648 pixels away
[Wed May  8 04:21:23 2013] Vigneting correction estimate = 1.000000
[Wed May  8 04:21:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  8 04:21:23 2013] Assessing source extent using major
[Wed May  8 04:21:23 2013] Source does appear to be extended
[Wed May  8 04:21:23 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  8 05:01:00 2013] Using EEF radius (= 13.52 ")to estimate initial spatial extent for simple fitting
[Wed May  8 05:01:00 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May  8 05:01:00 2013] Initial guess for spatial extent in simple fitting = 13.52"
[Wed May  8 05:01:00 2013] source mask rpix=3.1, npix_max = 52, mask sum = 52, frac = 0.999
[Wed May  8 05:01:00 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 13.52"
[Wed May  8 05:26:40 2013] fullrun_mos1_xmm0677850901_pi300-10000_cl_pass1_src9.ximg exists
[Wed May  8 05:26:40 2013] fullrun_mos1_xmm0677850901_pi300-10000_cl_pass1_src9_1.ximg exists
[Wed May  8 05:26:40 2013] Fit fullrun_mos1_xmm0677850901_pi300-10000_cl_pass1_src9 appears to have run properly
[Wed May  8 05:26:40 2013] fullrun_mos1_xmm0677850901_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Wed May  8 05:26:40 2013] fullrun_mos1_xmm0677850901_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Wed May  8 05:26:40 2013] Fit fullrun_mos1_xmm0677850901_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Wed May  8 05:50:01 2013] Spatial fit model total counts = 93.570700, observed total counts = 89.000000
[Wed May  8 05:50:01 2013] Offset between fit and detection position for source 15 = 0.457742 pixels
[Wed May  8 05:50:01 2013] 93.400800 total counts/ 59.193800 bgd. counts: snr = 4.446076
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.457742 pixels
  Position = (491.5, 270.1) = 23 15 34.05 -54 41 19.2
  Extent = 6.8 (4.6-10.0)", rotation angle = 0
  Source counts = 34.2 +/- 9.7
  Background counts = 59.2
  Rate = 0.001 +/- 0.0003
[Wed May  8 05:50:01 2013] Vigneting correction estimate = 1.000000
[Wed May  8 05:50:01 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  8 05:50:01 2013] Assessing source extent using major axis lower bound
[Wed May  8 05:50:01 2013] Source does appear to be extended
[Wed May  8 05:50:01 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  8 06:19:17 2013] XMMSAS src. selection expression = ellipse(42708.941060, 23453.124200, 409.527012, 409.527012, 0.000000, X, Y)
[Wed May  8 06:19:17 2013] Writing source region out to fullrun_mos1_xmm0677850901_pi300-10000_pass1_cl_src15_src.reg
[Wed May  8 06:19:17 2013] Extracting stamp from image fullrun_mos1_xmm0677850901_pi300-10000_cl_sm2.00.img.gz, (468, 247) - (515, 294)
[Wed May  8 06:19:17 2013] XMMSAS bgd. selection expression = annulus(42708.941060, 23453.124200, 682.545020, 1365.090039, X, Y)
[Wed May  8 06:19:17 2013] Writing fullrun_mos1_xmm0677850901_pi300-10000_pass1_cl_src15.gif
[Wed May  8 06:21:37 2013] Mean detx,y = (1276.67, 15381.82) 
[Wed May  8 06:21:38 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May  8 06:21:53 2013] Binned source spectrum to 10 counts/bin
[Wed May  8 06:21:53 2013] Setting source spectrum file to fullrun_mos1_xmm0677850901_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Wed May  8 06:21:53 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0677850901_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Wed May  8 06:28:59 2013] Not generating rmf since there are only 34 counts
[Wed May  8 06:28:59 2013] rmf not generated due to insufficient counts
[Wed May  8 06:41:26 2013] Updating aperture counts using extracted products
[Wed May  8 06:41:26 2013] Total counts from fullrun_mos1_xmm0677850901_pi300-10000_pass1_cl_src15_src_b10.pi.gz = 45.00
[Wed May  8 06:41:26 2013] Total counts from fullrun_mos1_xmm0677850901_pi300-10000_pass1_cl_src15_bgd.pi.gz = 82.00
[Wed May  8 06:41:26 2013] Got source and background scale factors 393744.000000, 2614451.000000
[Wed May  8 06:41:26 2013] User source parameters:
  Position = (491.5, 270.1) = 23 15 34.05 -54 41 19.2
  Extent = 6.8 (4.6-10.0)", rotation angle = 0
  Source aperture counts = 32.7 +/- 7.8
  Background aperture counts = 12.3
  Rate = 0.001 +/- 0.0002

[Wed May  8 06:41:28 2013] Calculating source flux in energy range 0.30-8.00
[Wed May  8 06:41:28 2013] Using photon index=1.80, rate=0.00108, arf fullrun_mos1_xmm0677850901_pi300-10000_pass1_cl_src15.arf
[Wed May  8 06:41:28 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  8 06:41:28 2013] Updating source flux to 3.3e-14
[Wed May  8 06:41:32 2013] Source 15 has fewer than 100.000000 counts, skipping spectral fitting
[Wed May  8 06:41:33 2013] xmm0677850901/analysis//spectral/fullrun_mos1_xmm0677850901_pi300-10000_pass1_cl_src15_pl.csv not found, spectral fit skipped or did not complete