[Thu Jun 20 21:12:06 2013] Detection parameters:
  Position = (103.8, 490.8) = 23 42 48.18 -54 24 15.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 58.3 +/- 12.2
  Background counts = 22.8
  Rate = 0.0005 +/- 0.0001

[Thu Jun 20 21:12:10 2013] Off-axis axis estimate = 19.84'
[Thu Jun 20 21:19:23 2013] Using EEF radius (= 16.35 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 21:19:23 2013] Initial guess for spatial extent in simple fitting = 16.35"
[Thu Jun 20 21:19:23 2013] source mask rpix=3.8, npix_max = 72, mask sum = 64, frac = 0.882
[Thu Jun 20 21:19:23 2013] Giving source the simple spatial ID 22 for pass 0, mean size = 16.35"
[Fri Jun 21 01:02:45 2013] fullrun_pn_xmm0677840101_pi300-10000_cl_pass0_src22.ximg exists
[Fri Jun 21 01:02:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677840101_pi300-10000_cl_pass0_src22.csv
[Fri Jun 21 01:02:45 2013] fullrun_pn_xmm0677840101_pi300-10000_cl_pass0_src22_1.ximg exists
[Fri Jun 21 01:02:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677840101_pi300-10000_cl_pass0_src22.csv
[Fri Jun 21 01:02:45 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0677840101_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0677840101_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 01:02:47 2013] fullrun_pn_xmm0677840101_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Fri Jun 21 01:02:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677840101_pi300-10000_cl_pass0_tfrozen_src22.csv
[Fri Jun 21 01:02:47 2013] fullrun_pn_xmm0677840101_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Fri Jun 21 01:02:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677840101_pi300-10000_cl_pass0_tfrozen_src22.csv
[Fri Jun 21 01:02:47 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0677840101_pi300-10000_cl_pass0_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0677840101_pi300-10000_cl_pass0_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 03:28:14 2013] Warning: source 22 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 36 at 21.566340 pixels away
[Fri Jun 21 03:28:15 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 03:28:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 03:28:15 2013] Assessing source extent using major
[Fri Jun 21 03:28:15 2013] Source does appear to be extended
[Fri Jun 21 03:28:15 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 03:28:57 2013] Using EEF radius (= 16.35 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 03:28:57 2013] Initial guess for spatial extent in simple fitting = 16.35"
[Fri Jun 21 03:28:57 2013] source mask rpix=3.8, npix_max = 72, mask sum = 64, frac = 0.882
[Fri Jun 21 03:28:57 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 16.35"
[Fri Jun 21 06:49:46 2013] fullrun_pn_xmm0677840101_pi300-10000_cl_pass1_src19.ximg exists
[Fri Jun 21 06:49:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677840101_pi300-10000_cl_pass1_src19.csv
[Fri Jun 21 06:49:46 2013] fullrun_pn_xmm0677840101_pi300-10000_cl_pass1_src19_1.ximg exists
[Fri Jun 21 06:49:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677840101_pi300-10000_cl_pass1_src19.csv
[Fri Jun 21 06:49:46 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0677840101_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0677840101_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 06:49:48 2013] fullrun_pn_xmm0677840101_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Fri Jun 21 06:49:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677840101_pi300-10000_cl_pass1_tfrozen_src19.csv
[Fri Jun 21 06:49:48 2013] fullrun_pn_xmm0677840101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Fri Jun 21 06:49:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677840101_pi300-10000_cl_pass1_tfrozen_src19.csv
[Fri Jun 21 06:49:48 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0677840101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0677840101_pi300-10000_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 08:40:20 2013] Spatial fit model total counts = 90.503700, observed total counts = 82.000000
[Fri Jun 21 08:40:20 2013] Offset between fit and detection position for source 36 = 6.727677 pixels
[Fri Jun 21 08:40:20 2013] Warning, changing simple spatial fit ID from 19 to 14
[Fri Jun 21 08:40:20 2013] 70.341500 total counts/ 13.084500 bgd. counts: snr = 15.828874
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 6.727677 pixels
  Position = (108.5, 495.6) = 23 42 45.82 -54 23 56.5
  Extent = 31.6 (31.5-31.6)", rotation angle = 0
  Source counts = 57.3 +/- 8.4
  Background counts = 13.1
  Rate = 0.0007 +/- 0.0001
[Fri Jun 21 08:40:20 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 08:40:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 08:40:20 2013] Assessing source extent using major axis lower bound
[Fri Jun 21 08:40:20 2013] Source does appear to be extended
[Fri Jun 21 08:40:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 08:40:20 2013] Source is confused with source 14
[Fri Jun 21 08:40:57 2013] XMMSAS src. selection expression = ellipse(9391.448000, 43068.082000, 1894.650055, 1894.650055, 0.000000, X, Y)
[Fri Jun 21 08:40:57 2013] Writing source region out to fullrun_pn_xmm0677840101_pi300-10000_pass1_cl_src36_src.reg
[Fri Jun 21 08:40:57 2013] Extracting stamp from image fullrun_pn_xmm0677840101_pi300-10000_cl_sm2.00.img.gz, (0, 387) - (217, 595)
[Fri Jun 21 08:40:58 2013] XMMSAS bgd. selection expression = annulus(9391.448000, 43068.082000, 3157.750091, 6315.500182, X, Y) && !ellipse(3303.814995, 44983.149231, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(6959.190964, 48268.535583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(3688.899117, 46233.397217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(3977.429447, 44815.457581, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(8426.034912, 43024.494293, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10676.503400, 41324.358000, 2513.432072, 489.777614, 12.459500, X, Y) && !ellipse(12224.168960, 40536.962000, 779.071222, 261.971208, 8.157660, X, Y) && !ellipse(14259.824800, 36588.905400, 511.494415, 260.556807, 56.476386, X, Y) && !ellipse(4646.963783, 45380.288513, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10179.934654, 41978.192383, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(5832.570435, 44060.590271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10543.977005, 42033.730286, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12070.844000, 42306.194000, 2173.264063, 2173.264063, 0.000000, X, Y) && !ellipse(12927.899933, 41082.664276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12452.709427, 41101.703491, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14063.007263, 40948.258728, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13437.125259, 40950.252655, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10616.564800, 38528.279800, 698.758420, 334.256010, 37.458198, X, Y) && !ellipse(11717.084442, 41151.450775, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 21 08:40:58 2013] Writing fullrun_pn_xmm0677840101_pi300-10000_pass1_cl_src36.gif
[Fri Jun 21 09:29:34 2013] Mean detx,y = (-2641.10, 4473.39) 
[Fri Jun 21 09:29:50 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 21 09:30:31 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 21 09:30:32 2013] Setting source spectrum file to fullrun_pn_xmm0677840101_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Fri Jun 21 09:30:32 2013] Setting bgd. spectrum file to fullrun_pn_xmm0677840101_pi300-10000_pass1_cl_src36_bgd.pi.gz
[Fri Jun 21 11:19:47 2013] Not generating rmf since there are only 57 counts
[Fri Jun 21 11:19:47 2013] rmf not generated due to insufficient counts
[Fri Jun 21 12:08:44 2013] Updating aperture counts using extracted products
[Fri Jun 21 12:08:44 2013] Total counts from fullrun_pn_xmm0677840101_pi300-10000_pass1_cl_src36_src_b10.pi.gz = 212.00
[Fri Jun 21 12:08:44 2013] Total counts from fullrun_pn_xmm0677840101_pi300-10000_pass1_cl_src36_bgd.pi.gz = 1905.00
[Fri Jun 21 12:08:44 2013] Got source and background scale factors 0.000000, 4870745.000000
[Fri Jun 21 12:08:44 2013] User source parameters:
  Position = (108.5, 495.6) = 23 42 45.82 -54 23 56.5
  Extent = 31.6 (31.5-31.6)", rotation angle = 0
  Source aperture counts = 212.0 +/- 15.6
  Background aperture counts = 0.0
  Rate = 0.002 +/- 0.0002

[Fri Jun 21 12:08:58 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 21 12:08:58 2013] Using photon index=1.80, rate=0.000673, arf fullrun_pn_xmm0677840101_pi300-10000_pass1_cl_src36.arf
[Fri Jun 21 12:08:58 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 21 12:08:58 2013] Getting flux using calc_pl_flux failed
[Sat Jun 22 16:03:37 2013] Flag c found in src. 36 procflags, skipping spectral fitting
[Sat Jun 22 16:03:37 2013] Source 36 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jun 22 16:04:25 2013] xmm0677840101/analysis//spectral/fullrun_pn_xmm0677840101_pi300-10000_pass1_cl_src36_pl.csv not found, spectral fit skipped or did not complete