[Thu Jun 20 21:13:16 2013] Detection parameters:
  Position = (142.8, 465.7) = 23 42 28.80 -54 25 59.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 46.7 +/- 9.5
  Background counts = 6.0
  Rate = 0.0004 +/- 9e-05

[Thu Jun 20 21:13:17 2013] Off-axis axis estimate = 16.56'
[Fri Jun 21 02:05:55 2013] Using EEF radius (= 14.71 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 02:05:55 2013] Initial guess for spatial extent in simple fitting = 14.71"
[Fri Jun 21 02:05:55 2013] source mask rpix=3.4, npix_max = 60, mask sum = 56, frac = 0.929
[Fri Jun 21 02:05:55 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 14.71"
[Fri Jun 21 03:27:47 2013] fullrun_mos2_xmm0677840101_pi300-10000_cl_pass0_src6.ximg exists
[Fri Jun 21 03:27:47 2013] fullrun_mos2_xmm0677840101_pi300-10000_cl_pass0_src6_1.ximg exists
[Fri Jun 21 03:27:47 2013] Fit fullrun_mos2_xmm0677840101_pi300-10000_cl_pass0_src6 appears to have run properly
[Fri Jun 21 03:27:47 2013] fullrun_mos2_xmm0677840101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Fri Jun 21 03:27:47 2013] fullrun_mos2_xmm0677840101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Fri Jun 21 03:27:47 2013] Fit fullrun_mos2_xmm0677840101_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Fri Jun 21 03:28:32 2013] Spatial fit model total counts = 105.177000, observed total counts = 107.000000
[Fri Jun 21 03:28:32 2013] Offset between fit and detection position for source 7 = 1.287446 pixels
[Fri Jun 21 03:28:32 2013] 102.801700 total counts/ 73.367400 bgd. counts: snr = 3.436388
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 1.287446 pixels
  Position = (141.5, 465.9) = 23 42 29.44 -54 26 6.3
  Extent = 9.0 (5.7-14.9)" x 4.5 (3.7-7.0)", rotation angle = 17 (340-51) degrees
  Source counts = 29.4 +/- 10.1
  Background counts = 73.4
  Rate = 0.0003 +/- 9e-05
[Fri Jun 21 03:28:32 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 03:28:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 03:28:32 2013] Assessing source extent using major axis lower bound
[Fri Jun 21 03:28:32 2013] Source does appear to be extended
[Fri Jun 21 03:28:32 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.82
[Fri Jun 21 07:46:51 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 21 07:46:51 2013] Initial guess for spatial extent in simple fitting = 6.77"
[Fri Jun 21 07:46:51 2013] source mask rpix=1.6, npix_max = 16, mask sum = 18, frac = 1.065
[Fri Jun 21 07:46:51 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 6.77"
[Fri Jun 21 08:40:02 2013] fullrun_mos2_xmm0677840101_pi300-10000_cl_pass1_src6.ximg exists
[Fri Jun 21 08:40:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0677840101_pi300-10000_cl_pass1_src6.csv
[Fri Jun 21 08:40:02 2013] fullrun_mos2_xmm0677840101_pi300-10000_cl_pass1_src6_1.ximg exists
[Fri Jun 21 08:40:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0677840101_pi300-10000_cl_pass1_src6.csv
[Fri Jun 21 08:40:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0677840101_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0677840101_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 08:40:02 2013] fullrun_mos2_xmm0677840101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Fri Jun 21 08:40:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0677840101_pi300-10000_cl_pass1_tfrozen_src6.csv
[Fri Jun 21 08:40:02 2013] fullrun_mos2_xmm0677840101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Fri Jun 21 08:40:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0677840101_pi300-10000_cl_pass1_tfrozen_src6.csv
[Fri Jun 21 08:40:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0677840101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0677840101_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 08:40:33 2013] Warning, spatial fit 6 centroid is now closest to src. 22
[Fri Jun 21 08:40:33 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 08:40:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 08:40:33 2013] Assessing source extent using major axis lower bound
[Fri Jun 21 08:40:33 2013] Source does appear to be extended
[Fri Jun 21 08:40:33 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.82
[Fri Jun 21 11:50:41 2013] XMMSAS src. selection expression = ellipse(12263.702600, 40486.028640, 539.461816, 272.423408, 17.312700, X, Y)
[Fri Jun 21 11:50:41 2013] Writing source region out to fullrun_mos2_xmm0677840101_pi300-10000_pass1_cl_src7_src.reg
[Fri Jun 21 11:50:41 2013] Extracting stamp from image fullrun_mos2_xmm0677840101_pi300-10000_cl_sm2.00.img.gz, (111, 435) - (173, 497)
[Fri Jun 21 11:50:41 2013] XMMSAS bgd. selection expression = annulus(12263.702600, 40486.028640, 899.103026, 1798.206052, X, Y) && !ellipse(10634.660194, 38575.952881, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10990.737000, 41020.742000, 309.504009, 309.504009, 0.000000, X, Y)
[Fri Jun 21 11:50:41 2013] Writing fullrun_mos2_xmm0677840101_pi300-10000_pass1_cl_src7.gif
[Fri Jun 21 11:52:28 2013] Mean detx,y = (-1312.75, -3494.02) 
[Fri Jun 21 11:52:29 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 21 11:52:38 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 21 11:52:38 2013] Setting source spectrum file to fullrun_mos2_xmm0677840101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Fri Jun 21 11:52:38 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0677840101_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Fri Jun 21 12:03:44 2013] Not generating rmf since there are only 29 counts
[Fri Jun 21 12:03:44 2013] rmf not generated due to insufficient counts
[Fri Jun 21 12:09:05 2013] Updating aperture counts using extracted products
[Fri Jun 21 12:09:05 2013] Total counts from fullrun_mos2_xmm0677840101_pi300-10000_pass1_cl_src7_src_b10.pi.gz = 44.00
[Fri Jun 21 12:09:05 2013] Total counts from fullrun_mos2_xmm0677840101_pi300-10000_pass1_cl_src7_bgd.pi.gz = 174.00
[Fri Jun 21 12:09:05 2013] Got source and background scale factors 586.000000, 0.000000
[Fri Jun 21 12:09:05 2013] Background scale factor is not positive, halting re-assessment of this source
[Fri Jun 21 12:09:12 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 21 12:09:12 2013] Using photon index=1.80, rate=0.000271, arf fullrun_mos2_xmm0677840101_pi300-10000_pass1_cl_src7.arf
[Fri Jun 21 12:09:12 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 21 12:09:12 2013] Updating source flux to 4.7e-13
[Sat Jun 22 16:03:02 2013] Source 7 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jun 22 16:03:27 2013] xmm0677840101/analysis//spectral/fullrun_mos2_xmm0677840101_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete