[Thu Jun 20 21:13:16 2013] Detection parameters:
  Position = (127.1, 472.1) = 23 42 36.62 -54 25 38.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 31.7 +/- 7.7
  Background counts = 5.9
  Rate = 0.0003 +/- 7e-05

[Thu Jun 20 21:13:17 2013] Off-axis axis estimate = 17.69'
[Fri Jun 21 02:05:55 2013] Using EEF radius (= 15.27 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 02:05:55 2013] Initial guess for spatial extent in simple fitting = 15.27"
[Fri Jun 21 02:05:55 2013] source mask rpix=3.5, npix_max = 64, mask sum = 64, frac = 0.995
[Fri Jun 21 02:05:55 2013] Giving source the simple spatial ID 14 for pass 0, mean size = 15.27"
[Fri Jun 21 03:27:47 2013] fullrun_mos2_xmm0677840101_pi300-10000_cl_pass0_src14.ximg exists
[Fri Jun 21 03:27:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0677840101_pi300-10000_cl_pass0_src14.csv
[Fri Jun 21 03:27:47 2013] fullrun_mos2_xmm0677840101_pi300-10000_cl_pass0_src14_1.ximg exists
[Fri Jun 21 03:27:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0677840101_pi300-10000_cl_pass0_src14.csv
[Fri Jun 21 03:27:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0677840101_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0677840101_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 03:27:47 2013] fullrun_mos2_xmm0677840101_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Fri Jun 21 03:27:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0677840101_pi300-10000_cl_pass0_tfrozen_src14.csv
[Fri Jun 21 03:27:47 2013] fullrun_mos2_xmm0677840101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Fri Jun 21 03:27:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0677840101_pi300-10000_cl_pass0_tfrozen_src14.csv
[Fri Jun 21 03:27:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0677840101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0677840101_pi300-10000_cl_pass0_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 03:28:32 2013] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 22 at 17.952442 pixels away
[Fri Jun 21 03:28:32 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 03:28:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 03:28:32 2013] Assessing source extent using major
[Fri Jun 21 03:28:32 2013] Source does appear to be extended
[Fri Jun 21 03:28:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 07:46:51 2013] Using EEF radius (= 15.27 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 07:46:51 2013] Initial guess for spatial extent in simple fitting = 15.27"
[Fri Jun 21 07:46:51 2013] source mask rpix=3.5, npix_max = 64, mask sum = 64, frac = 0.995
[Fri Jun 21 07:46:51 2013] Giving source the simple spatial ID 14 for pass 1, mean size = 15.27"
[Fri Jun 21 08:40:02 2013] fullrun_mos2_xmm0677840101_pi300-10000_cl_pass1_src14.ximg exists
[Fri Jun 21 08:40:02 2013] fullrun_mos2_xmm0677840101_pi300-10000_cl_pass1_src14_1.ximg exists
[Fri Jun 21 08:40:02 2013] Fit fullrun_mos2_xmm0677840101_pi300-10000_cl_pass1_src14 appears to have run properly
[Fri Jun 21 08:40:03 2013] fullrun_mos2_xmm0677840101_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Fri Jun 21 08:40:03 2013] fullrun_mos2_xmm0677840101_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Fri Jun 21 08:40:03 2013] Fit fullrun_mos2_xmm0677840101_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Fri Jun 21 08:40:33 2013] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 22 at 13.692060 pixels away
[Fri Jun 21 08:40:33 2013] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 22 at 16.680995 pixels away
[Fri Jun 21 08:40:33 2013] Spatial fit model total counts = 120.495000, observed total counts = 116.000000
[Fri Jun 21 08:40:33 2013] Offset between fit and detection position for source 22 = 0.188508 pixels
[Fri Jun 21 08:40:33 2013] 120.581800 total counts/ 100.819000 bgd. counts: snr = 1.968237
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.188508 pixels
  Position = (126.9, 472.1) = 23 42 36.72 -54 25 39.3
  Extent = 3.9 (3.8-5.6)", rotation angle = 0
  Source counts = 19.8 +/- 11.0
  Background counts = 100.8
  Rate = 0.0002 +/- 0.0001
[Fri Jun 21 08:40:33 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 08:40:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 08:40:33 2013] Assessing source extent using major axis lower bound
[Fri Jun 21 08:40:33 2013] Source does appear to be extended
[Fri Jun 21 08:40:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 11:50:41 2013] XMMSAS src. selection expression = ellipse(10990.737000, 41020.742000, 232.128007, 232.128007, 0.000000, X, Y)
[Fri Jun 21 11:50:41 2013] Writing source region out to fullrun_mos2_xmm0677840101_pi300-10000_pass1_cl_src22_src.reg
[Fri Jun 21 11:50:41 2013] Extracting stamp from image fullrun_mos2_xmm0677840101_pi300-10000_cl_sm2.00.img.gz, (114, 459) - (140, 485)
[Fri Jun 21 11:50:41 2013] XMMSAS bgd. selection expression = annulus(10990.737000, 41020.742000, 386.880011, 773.760022, X, Y) && !ellipse(12263.702600, 40486.028640, 719.282421, 363.231210, 17.312700, X, Y)
[Fri Jun 21 11:50:41 2013] Writing fullrun_mos2_xmm0677840101_pi300-10000_pass1_cl_src22.gif
[Fri Jun 21 11:56:17 2013] Mean detx,y = (-438.08, 225.16) 
[Fri Jun 21 11:56:19 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 21 11:56:25 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 21 11:56:25 2013] Setting source spectrum file to fullrun_mos2_xmm0677840101_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Fri Jun 21 11:56:25 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0677840101_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Fri Jun 21 12:04:42 2013] Not generating rmf since there are only 19 counts
[Fri Jun 21 12:04:42 2013] rmf not generated due to insufficient counts
[Fri Jun 21 12:09:07 2013] Updating aperture counts using extracted products
[Fri Jun 21 12:09:07 2013] Total counts from fullrun_mos2_xmm0677840101_pi300-10000_pass1_cl_src22_src_b10.pi.gz = 25.00
[Fri Jun 21 12:09:07 2013] Total counts from fullrun_mos2_xmm0677840101_pi300-10000_pass1_cl_src22_bgd.pi.gz = 32.00
[Fri Jun 21 12:09:07 2013] Got source and background scale factors 72.000000, 720.000000
[Fri Jun 21 12:09:08 2013] User source parameters:
  Position = (126.9, 472.1) = 23 42 36.72 -54 25 39.3
  Extent = 3.9 (3.8-5.6)", rotation angle = 0
  Source aperture counts = 21.8 +/- 6.1
  Background aperture counts = 3.2
  Rate = 0.0002 +/- 6e-05

[Fri Jun 21 12:09:12 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 21 12:09:12 2013] Using photon index=1.80, rate=0.000182, arf fullrun_mos2_xmm0677840101_pi300-10000_pass1_cl_src22.arf
[Fri Jun 21 12:09:12 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 21 12:09:12 2013] Getting flux using calc_pl_flux failed
[Sat Jun 22 16:03:08 2013] Source 22 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jun 22 16:03:27 2013] xmm0677840101/analysis//spectral/fullrun_mos2_xmm0677840101_pi300-10000_pass1_cl_src22_pl.csv not found, spectral fit skipped or did not complete