[Thu Jun 20 21:13:15 2013] Detection parameters:
  Position = (466.6, 513.7) = 23 39 47.47 -54 22 44.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 49.8 +/- 12.6
  Background counts = 2.3
  Rate = 0.0005 +/- 0.0001

[Thu Jun 20 21:13:17 2013] Off-axis axis estimate = 19.80'
[Fri Jun 21 02:05:54 2013] Using EEF radius (= 16.33 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 02:05:54 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 21 02:05:54 2013] Initial guess for spatial extent in simple fitting = 16.33"
[Fri Jun 21 02:05:54 2013] source mask rpix=3.8, npix_max = 72, mask sum = 53, frac = 0.732
[Fri Jun 21 02:05:54 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 16.33"
[Fri Jun 21 03:27:47 2013] fullrun_mos2_xmm0677840101_pi300-10000_cl_pass0_src5.ximg exists
[Fri Jun 21 03:27:47 2013] fullrun_mos2_xmm0677840101_pi300-10000_cl_pass0_src5_1.ximg exists
[Fri Jun 21 03:27:47 2013] Fit fullrun_mos2_xmm0677840101_pi300-10000_cl_pass0_src5 appears to have run properly
[Fri Jun 21 03:27:47 2013] fullrun_mos2_xmm0677840101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Fri Jun 21 03:27:47 2013] fullrun_mos2_xmm0677840101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Jun 21 03:27:47 2013] Fit fullrun_mos2_xmm0677840101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Fri Jun 21 03:28:32 2013] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 17.692876 pixels away
[Fri Jun 21 03:28:32 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 03:28:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 03:28:32 2013] Assessing source extent using major
[Fri Jun 21 03:28:32 2013] Source does appear to be extended
[Fri Jun 21 03:28:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 07:46:51 2013] Using EEF radius (= 16.33 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 07:46:51 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 21 07:46:51 2013] Initial guess for spatial extent in simple fitting = 16.33"
[Fri Jun 21 07:46:51 2013] source mask rpix=3.8, npix_max = 72, mask sum = 53, frac = 0.732
[Fri Jun 21 07:46:51 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 16.33"
[Fri Jun 21 08:40:02 2013] fullrun_mos2_xmm0677840101_pi300-10000_cl_pass1_src5.ximg exists
[Fri Jun 21 08:40:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0677840101_pi300-10000_cl_pass1_src5.csv
[Fri Jun 21 08:40:02 2013] fullrun_mos2_xmm0677840101_pi300-10000_cl_pass1_src5_1.ximg exists
[Fri Jun 21 08:40:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0677840101_pi300-10000_cl_pass1_src5.csv
[Fri Jun 21 08:40:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0677840101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0677840101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 08:40:02 2013] fullrun_mos2_xmm0677840101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Fri Jun 21 08:40:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0677840101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Fri Jun 21 08:40:02 2013] fullrun_mos2_xmm0677840101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Jun 21 08:40:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0677840101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Fri Jun 21 08:40:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0677840101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0677840101_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 08:40:33 2013] Spatial fit model total counts = 76.034100, observed total counts = 61.000000
[Fri Jun 21 08:40:33 2013] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 21 08:40:33 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 08:40:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 08:40:33 2013] Assessing source extent using major
[Fri Jun 21 08:40:33 2013] Source does appear to be extended
[Fri Jun 21 08:40:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 11:50:41 2013] XMMSAS src. selection expression = ellipse(40544.773926, 44642.625793, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 21 11:50:41 2013] Writing source region out to fullrun_mos2_xmm0677840101_pi300-10000_pass1_cl_src2_src.reg
[Fri Jun 21 11:50:41 2013] Extracting stamp from image fullrun_mos2_xmm0677840101_pi300-10000_cl_sm2.00.img.gz, (429, 476) - (504, 551)
[Fri Jun 21 11:50:41 2013] XMMSAS bgd. selection expression = annulus(40544.773926, 44642.625793, 1087.500000, 2175.000000, X, Y)
[Fri Jun 21 11:50:41 2013] Writing fullrun_mos2_xmm0677840101_pi300-10000_pass1_cl_src2.gif
[Fri Jun 21 11:51:55 2013] Mean detx,y = (-66.97, -10605.08) 
[Fri Jun 21 11:51:56 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 21 11:52:03 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 21 11:52:04 2013] Setting source spectrum file to fullrun_mos2_xmm0677840101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jun 21 11:52:04 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0677840101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Jun 21 12:03:34 2013] Not generating rmf since there are only 49 counts
[Fri Jun 21 12:03:34 2013] rmf not generated due to insufficient counts
[Fri Jun 21 12:09:05 2013] Updating aperture counts using extracted products
[Fri Jun 21 12:09:05 2013] Total counts from fullrun_mos2_xmm0677840101_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 37.00
[Fri Jun 21 12:09:05 2013] Total counts from fullrun_mos2_xmm0677840101_pi300-10000_pass1_cl_src2_bgd.pi.gz = 146.00
[Fri Jun 21 12:09:05 2013] Got source and background scale factors 75.000000, 2694.000000
[Fri Jun 21 12:09:05 2013] User source parameters:
  Position = (466.6, 513.7) = 23 39 47.47 -54 22 44.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 32.9 +/- 7.1
  Background aperture counts = 4.1
  Rate = 0.0003 +/- 7e-05

[Fri Jun 21 12:09:05 2013] Updating counts from extracted products
[Fri Jun 21 12:09:05 2013] Set source signif. to 32.94/2.02 = 16.34
[Fri Jun 21 12:09:12 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 21 12:09:12 2013] Using photon index=1.80, rate=0.000303, arf fullrun_mos2_xmm0677840101_pi300-10000_pass1_cl_src2.arf
[Fri Jun 21 12:09:12 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 21 12:09:12 2013] Getting flux using calc_pl_flux failed
[Sat Jun 22 16:03:02 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 22 16:03:27 2013] xmm0677840101/analysis//spectral/fullrun_mos2_xmm0677840101_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete