[Thu Jun 20 21:12:40 2013] Detection parameters:
  Position = (140.4, 466.9) = 23 42 29.97 -54 26 3.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 23.9 +/- 6.7
  Background counts = 2.2
  Rate = 0.0002 +/- 6e-05

[Thu Jun 20 21:12:41 2013] Off-axis axis estimate = 16.75'
[Fri Jun 21 01:02:49 2013] Using EEF radius (= 14.80 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 01:02:49 2013] Initial guess for spatial extent in simple fitting = 14.80"
[Fri Jun 21 01:02:49 2013] source mask rpix=3.4, npix_max = 60, mask sum = 56, frac = 0.919
[Fri Jun 21 01:02:49 2013] Giving source the simple spatial ID 21 for pass 0, mean size = 14.80"
[Fri Jun 21 02:05:54 2013] fullrun_mos1_xmm0677840101_pi300-10000_cl_pass0_src21.ximg exists
[Fri Jun 21 02:05:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0677840101_pi300-10000_cl_pass0_src21.csv
[Fri Jun 21 02:05:54 2013] fullrun_mos1_xmm0677840101_pi300-10000_cl_pass0_src21_1.ximg exists
[Fri Jun 21 02:05:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0677840101_pi300-10000_cl_pass0_src21.csv
[Fri Jun 21 02:05:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0677840101_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0677840101_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 02:05:54 2013] fullrun_mos1_xmm0677840101_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Fri Jun 21 02:05:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0677840101_pi300-10000_cl_pass0_tfrozen_src21.csv
[Fri Jun 21 02:05:54 2013] fullrun_mos1_xmm0677840101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Fri Jun 21 02:05:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0677840101_pi300-10000_cl_pass0_tfrozen_src21.csv
[Fri Jun 21 02:05:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0677840101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0677840101_pi300-10000_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 03:28:23 2013] Warning, spatial fit 21 centroid is now closest to src. 4
[Fri Jun 21 03:28:23 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 03:28:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 03:28:23 2013] Assessing source extent using major
[Fri Jun 21 03:28:23 2013] Source does appear to be extended
[Fri Jun 21 03:28:23 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 06:49:49 2013] Using EEF radius (= 14.80 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 06:49:49 2013] Initial guess for spatial extent in simple fitting = 14.80"
[Fri Jun 21 06:49:49 2013] source mask rpix=3.4, npix_max = 60, mask sum = 56, frac = 0.919
[Fri Jun 21 06:49:49 2013] Giving source the simple spatial ID 21 for pass 1, mean size = 14.80"
[Fri Jun 21 07:46:50 2013] fullrun_mos1_xmm0677840101_pi300-10000_cl_pass1_src21.ximg exists
[Fri Jun 21 07:46:50 2013] fullrun_mos1_xmm0677840101_pi300-10000_cl_pass1_src21_1.ximg exists
[Fri Jun 21 07:46:50 2013] Fit fullrun_mos1_xmm0677840101_pi300-10000_cl_pass1_src21 appears to have run properly
[Fri Jun 21 07:46:51 2013] fullrun_mos1_xmm0677840101_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Fri Jun 21 07:46:51 2013] fullrun_mos1_xmm0677840101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Fri Jun 21 07:46:51 2013] Fit fullrun_mos1_xmm0677840101_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Fri Jun 21 08:40:27 2013] Spatial fit model total counts = 50.289000, observed total counts = 48.000000
[Fri Jun 21 08:40:27 2013] Offset between fit and detection position for source 5 = 1.222826 pixels
[Fri Jun 21 08:40:27 2013] 50.350100 total counts/ 27.628100 bgd. counts: snr = 4.322859
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 1.222826 pixels
  Position = (141.6, 466.7) = 23 42 29.38 -54 26 3.0
  Extent = 7.9 (6.2-9.6)", rotation angle = 0
  Source counts = 22.7 +/- 7.1
  Background counts = 27.6
  Rate = 0.0002 +/- 7e-05
[Fri Jun 21 08:40:27 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 08:40:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 08:40:27 2013] Assessing source extent using major axis lower bound
[Fri Jun 21 08:40:27 2013] Source does appear to be extended
[Fri Jun 21 08:40:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 11:35:59 2013] XMMSAS src. selection expression = ellipse(12274.425200, 40552.907600, 476.603414, 476.603414, 0.000000, X, Y)
[Fri Jun 21 11:35:59 2013] Writing source region out to fullrun_mos1_xmm0677840101_pi300-10000_pass1_cl_src5_src.reg
[Fri Jun 21 11:35:59 2013] Extracting stamp from image fullrun_mos1_xmm0677840101_pi300-10000_cl_sm2.00.img.gz, (114, 439) - (169, 494)
[Fri Jun 21 11:35:59 2013] XMMSAS bgd. selection expression = annulus(12274.425200, 40552.907600, 794.339023, 1588.678046, X, Y) && !ellipse(11097.206780, 41002.302400, 826.872024, 230.396807, 0.482793, X, Y)
[Fri Jun 21 11:35:59 2013] Writing fullrun_mos1_xmm0677840101_pi300-10000_pass1_cl_src5.gif
[Fri Jun 21 11:42:25 2013] Mean detx,y = (14543.75, 2433.43) 
[Fri Jun 21 11:42:27 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 21 11:42:35 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 21 11:42:35 2013] Setting source spectrum file to fullrun_mos1_xmm0677840101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Jun 21 11:42:35 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0677840101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Fri Jun 21 11:49:54 2013] Not generating rmf since there are only 22 counts
[Fri Jun 21 11:49:54 2013] rmf not generated due to insufficient counts
[Fri Jun 21 12:09:02 2013] Updating aperture counts using extracted products
[Fri Jun 21 12:09:02 2013] Total counts from fullrun_mos1_xmm0677840101_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 28.00
[Fri Jun 21 12:09:02 2013] Total counts from fullrun_mos1_xmm0677840101_pi300-10000_pass1_cl_src5_bgd.pi.gz = 39.00
[Fri Jun 21 12:09:02 2013] Got source and background scale factors 890.000000, 3101.000000
[Fri Jun 21 12:09:02 2013] User source parameters:
  Position = (141.6, 466.7) = 23 42 29.38 -54 26 3.0
  Extent = 7.9 (6.2-9.6)", rotation angle = 0
  Source aperture counts = 16.8 +/- 6.4
  Background aperture counts = 11.2
  Rate = 0.0002 +/- 6e-05

[Fri Jun 21 12:09:04 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 21 12:09:04 2013] Using photon index=1.80, rate=0.00021, arf fullrun_mos1_xmm0677840101_pi300-10000_pass1_cl_src5.arf
[Fri Jun 21 12:09:04 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 21 12:09:04 2013] Updating source flux to 4.8e-13
[Fri Jun 21 12:09:15 2013] Source 5 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jun 22 16:02:58 2013] xmm0677840101/analysis//spectral/fullrun_mos1_xmm0677840101_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete