[Thu Jun 20 21:12:40 2013] Detection parameters:
  Position = (227.6, 58.8) = 23 41 46.97 -54 55 38.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 26.8 +/- 6.8
  Background counts = 2.1
  Rate = 0.0002 +/- 6e-05

[Thu Jun 20 21:12:41 2013] Off-axis axis estimate = 18.12'
[Fri Jun 21 01:02:49 2013] Using EEF radius (= 15.49 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 01:02:49 2013] Initial guess for spatial extent in simple fitting = 15.49"
[Fri Jun 21 01:02:49 2013] source mask rpix=3.6, npix_max = 65, mask sum = 59, frac = 0.895
[Fri Jun 21 01:02:49 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 15.49"
[Fri Jun 21 02:05:54 2013] fullrun_mos1_xmm0677840101_pi300-10000_cl_pass0_src17.ximg exists
[Fri Jun 21 02:05:54 2013] fullrun_mos1_xmm0677840101_pi300-10000_cl_pass0_src17_1.ximg exists
[Fri Jun 21 02:05:54 2013] Fit fullrun_mos1_xmm0677840101_pi300-10000_cl_pass0_src17 appears to have run properly
[Fri Jun 21 02:05:54 2013] fullrun_mos1_xmm0677840101_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Fri Jun 21 02:05:54 2013] fullrun_mos1_xmm0677840101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Fri Jun 21 02:05:54 2013] Fit fullrun_mos1_xmm0677840101_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Fri Jun 21 03:28:23 2013] Spatial fit model total counts = 49.582300, observed total counts = 47.000000
[Fri Jun 21 03:28:23 2013] Offset between fit and detection position for source 21 = 0.830816 pixels
[Fri Jun 21 03:28:23 2013] 50.418800 total counts/ 29.025700 bgd. counts: snr = 3.970840
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.830816 pixels
  Position = (228.3, 59.1) = 23 41 46.59 -54 55 37.1
  Extent = 6.8 (4.3-10.0)", rotation angle = 0
  Source counts = 21.4 +/- 7.1
  Background counts = 29.0
  Rate = 0.0002 +/- 7e-05
[Fri Jun 21 03:28:23 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 03:28:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 03:28:23 2013] Assessing source extent using major axis lower bound
[Fri Jun 21 03:28:23 2013] Source does appear to be extended
[Fri Jun 21 03:28:23 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 06:49:49 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 21 06:49:49 2013] Initial guess for spatial extent in simple fitting = 6.82"
[Fri Jun 21 06:49:49 2013] source mask rpix=1.6, npix_max = 17, mask sum = 14, frac = 0.818
[Fri Jun 21 06:49:49 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 6.82"
[Fri Jun 21 07:46:50 2013] fullrun_mos1_xmm0677840101_pi300-10000_cl_pass1_src17.ximg exists
[Fri Jun 21 07:46:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0677840101_pi300-10000_cl_pass1_src17.csv
[Fri Jun 21 07:46:50 2013] fullrun_mos1_xmm0677840101_pi300-10000_cl_pass1_src17_1.ximg exists
[Fri Jun 21 07:46:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0677840101_pi300-10000_cl_pass1_src17.csv
[Fri Jun 21 07:46:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0677840101_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0677840101_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 07:46:51 2013] fullrun_mos1_xmm0677840101_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Fri Jun 21 07:46:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0677840101_pi300-10000_cl_pass1_tfrozen_src17.csv
[Fri Jun 21 07:46:51 2013] fullrun_mos1_xmm0677840101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Fri Jun 21 07:46:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0677840101_pi300-10000_cl_pass1_tfrozen_src17.csv
[Fri Jun 21 07:46:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0677840101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0677840101_pi300-10000_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 08:40:27 2013] Spatial fit model total counts = 31.386600, observed total counts = 36.000000
[Fri Jun 21 08:40:27 2013] Offset between fit and detection position for source 21 = 0.133850 pixels
[Fri Jun 21 08:40:27 2013] 32.866450 total counts/ 9.148650 bgd. counts: snr = 7.841441
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.133850 pixels
  Position = (228.4, 59.0) = 23 41 46.55 -54 55 37.6
  Extent = 7.3 (4.4-10.2)", rotation angle = 0
  Source counts = 23.7 +/- 5.7
  Background counts = 9.1
  Rate = 0.0002 +/- 5e-05
[Fri Jun 21 08:40:27 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 08:40:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 08:40:27 2013] Assessing source extent using major axis lower bound
[Fri Jun 21 08:40:27 2013] Source does appear to be extended
[Fri Jun 21 08:40:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 11:35:59 2013] XMMSAS src. selection expression = ellipse(19820.965400, 5084.700200, 438.058213, 438.058213, 0.000000, X, Y)
[Fri Jun 21 11:35:59 2013] Writing source region out to fullrun_mos1_xmm0677840101_pi300-10000_pass1_cl_src21_src.reg
[Fri Jun 21 11:35:59 2013] Extracting stamp from image fullrun_mos1_xmm0677840101_pi300-10000_cl_sm2.00.img.gz, (203, 34) - (254, 84)
[Fri Jun 21 11:35:59 2013] XMMSAS bgd. selection expression = annulus(19820.965400, 5084.700200, 730.097021, 1460.194042, X, Y)
[Fri Jun 21 11:35:59 2013] Writing fullrun_mos1_xmm0677840101_pi300-10000_pass1_cl_src21.gif
[Fri Jun 21 11:41:08 2013] Mean detx,y = (7287.88, 1076.00) 
[Fri Jun 21 11:41:09 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 21 11:41:11 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 21 11:41:11 2013] Setting source spectrum file to fullrun_mos1_xmm0677840101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Fri Jun 21 11:41:11 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0677840101_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Fri Jun 21 11:49:39 2013] Not generating rmf since there are only 23 counts
[Fri Jun 21 11:49:39 2013] rmf not generated due to insufficient counts
[Fri Jun 21 12:09:01 2013] Updating aperture counts using extracted products
[Fri Jun 21 12:09:01 2013] Total counts from fullrun_mos1_xmm0677840101_pi300-10000_pass1_cl_src21_src_b10.pi.gz = 25.00
[Fri Jun 21 12:09:01 2013] Total counts from fullrun_mos1_xmm0677840101_pi300-10000_pass1_cl_src21_bgd.pi.gz = 46.00
[Fri Jun 21 12:09:01 2013] Got source and background scale factors 1.000000, 0.000000
[Fri Jun 21 12:09:01 2013] Background scale factor is not positive, halting re-assessment of this source
[Fri Jun 21 12:09:04 2013] No arf file for this source, not re-computing flux
[Fri Jun 21 12:09:15 2013] Source 21 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jun 22 16:02:57 2013] xmm0677840101/analysis//spectral/fullrun_mos1_xmm0677840101_pi300-10000_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete