[Fri Jun 14 13:18:46 2013] Detection parameters:
  Position = (126.4, 449.9) = 23 49 29.65 -55 6 2.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 242.0 +/- 18.7
  Background counts = 16.9
  Rate = 0.002 +/- 0.0001

[Fri Jun 14 13:18:49 2013] Off-axis axis estimate = 16.62'
[Fri Jun 14 13:27:04 2013] Using EEF radius (= 14.74 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 13:27:04 2013] Initial guess for spatial extent in simple fitting = 14.74"
[Fri Jun 14 13:27:04 2013] source mask rpix=3.4, npix_max = 60, mask sum = 46, frac = 0.761
[Fri Jun 14 13:27:04 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 14.74"
[Fri Jun 14 15:25:24 2013] fullrun_pn_xmm0677750101_pi300-10000_cl_pass0_src6.ximg exists
[Fri Jun 14 15:25:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677750101_pi300-10000_cl_pass0_src6.csv
[Fri Jun 14 15:25:24 2013] fullrun_pn_xmm0677750101_pi300-10000_cl_pass0_src6_1.ximg exists
[Fri Jun 14 15:25:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677750101_pi300-10000_cl_pass0_src6.csv
[Fri Jun 14 15:25:24 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0677750101_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0677750101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 15:25:25 2013] fullrun_pn_xmm0677750101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Fri Jun 14 15:25:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677750101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Fri Jun 14 15:25:25 2013] fullrun_pn_xmm0677750101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Fri Jun 14 15:25:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677750101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Fri Jun 14 15:25:25 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0677750101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0677750101_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 20:03:39 2013] Spatial fit model total counts = 541.572000, observed total counts = 425.000000
[Fri Jun 14 20:03:39 2013] Poor agreement between spatial fit and data for source 7
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 14 20:03:40 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 20:03:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 20:03:40 2013] Assessing source extent using major
[Fri Jun 14 20:03:40 2013] Source does appear to be extended
[Fri Jun 14 20:03:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 20:04:27 2013] Using EEF radius (= 14.74 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 20:04:27 2013] Initial guess for spatial extent in simple fitting = 14.74"
[Fri Jun 14 20:04:27 2013] source mask rpix=3.4, npix_max = 60, mask sum = 46, frac = 0.761
[Fri Jun 14 20:04:27 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 14.74"
[Fri Jun 14 21:59:40 2013] fullrun_pn_xmm0677750101_pi300-10000_cl_pass1_src5.ximg exists
[Fri Jun 14 21:59:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677750101_pi300-10000_cl_pass1_src5.csv
[Fri Jun 14 21:59:40 2013] fullrun_pn_xmm0677750101_pi300-10000_cl_pass1_src5_1.ximg exists
[Fri Jun 14 21:59:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677750101_pi300-10000_cl_pass1_src5.csv
[Fri Jun 14 21:59:40 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0677750101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0677750101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 21:59:41 2013] fullrun_pn_xmm0677750101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Fri Jun 14 21:59:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677750101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Fri Jun 14 21:59:41 2013] fullrun_pn_xmm0677750101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Jun 14 21:59:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677750101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Fri Jun 14 21:59:41 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0677750101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0677750101_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 03:30:57 2013] Spatial fit model total counts = 541.406000, observed total counts = 425.000000
[Sat Jun 15 03:30:57 2013] Poor agreement between spatial fit and data for source 7
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 15 03:30:58 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 03:30:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 03:30:58 2013] Assessing source extent using major
[Sat Jun 15 03:30:58 2013] Source does appear to be extended
[Sat Jun 15 03:30:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 03:31:48 2013] XMMSAS src. selection expression = ellipse(10951.577103, 39094.031403, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 15 03:31:48 2013] Writing source region out to fullrun_pn_xmm0677750101_pi300-10000_pass1_cl_src7_src.reg
[Sat Jun 15 03:31:48 2013] Extracting stamp from image fullrun_pn_xmm0677750101_pi300-10000_cl_sm2.00.img.gz, (89, 412) - (164, 487)
[Sat Jun 15 03:31:48 2013] XMMSAS bgd. selection expression = annulus(10951.577103, 39094.031403, 1087.500000, 2175.000000, X, Y) && !ellipse(10420.966843, 36305.759460, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11526.789200, 37757.481689, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11905.067154, 36810.963745, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 15 03:31:48 2013] Writing fullrun_pn_xmm0677750101_pi300-10000_pass1_cl_src7.gif
[Sat Jun 15 03:42:45 2013] Mean detx,y = (7899.79, -509.08) 
[Sat Jun 15 03:43:06 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 03:43:32 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 03:43:33 2013] Setting source spectrum file to fullrun_pn_xmm0677750101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sat Jun 15 03:43:33 2013] Setting bgd. spectrum file to fullrun_pn_xmm0677750101_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Sat Jun 15 07:00:12 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 15 07:00:12 2013] rmf not generated due to insufficient counts
[Sat Jun 15 09:17:17 2013] Updating aperture counts using extracted products
[Sat Jun 15 09:17:18 2013] Total counts from fullrun_pn_xmm0677750101_pi300-10000_pass1_cl_src7_src_b10.pi.gz = 289.00
[Sat Jun 15 09:17:18 2013] Total counts from fullrun_pn_xmm0677750101_pi300-10000_pass1_cl_src7_bgd.pi.gz = 710.00
[Sat Jun 15 09:17:18 2013] Got source and background scale factors 1530.000000, 2901.000000
[Sat Jun 15 09:17:18 2013] User source parameters:
  Position = (126.4, 449.9) = 23 49 29.65 -55 6 2.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = -85.5 +/- 18.0
  Background aperture counts = 374.5
  Rate = -0.0008 +/- 0.0002

[Sat Jun 15 09:17:18 2013] Updating counts from extracted products
[Sat Jun 15 09:17:18 2013] Set source signif. to -85.46/19.35 = -4.42
[Sat Jun 15 09:17:50 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 15 09:17:50 2013] Using photon index=1.80, rate=-0.000772, arf fullrun_pn_xmm0677750101_pi300-10000_pass1_cl_src7.arf
[Sat Jun 15 09:17:50 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 15 09:17:50 2013] Getting flux using calc_pl_flux failed
[Tue Jul  9 04:54:04 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jul 10 00:16:39 2013] xmm0677750101/analysis//spectral/fullrun_pn_xmm0677750101_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete