[Fri Jun 14 13:18:46 2013] Detection parameters:
  Position = (460.9, 157.2) = 23 46 39.39 -55 27 16.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1045.1 +/- 38.0
  Background counts = 13.7
  Rate = 0.008 +/- 0.0003

[Fri Jun 14 13:18:49 2013] Off-axis axis estimate = 15.61'
[Fri Jun 14 13:27:04 2013] Using EEF radius (= 14.23 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 13:27:04 2013] Initial guess for spatial extent in simple fitting = 14.23"
[Fri Jun 14 13:27:04 2013] source mask rpix=3.3, npix_max = 56, mask sum = 58, frac = 1.019
[Fri Jun 14 13:27:04 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 14.23"
[Fri Jun 14 15:25:24 2013] fullrun_pn_xmm0677750101_pi300-10000_cl_pass0_src2.ximg exists
[Fri Jun 14 15:25:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677750101_pi300-10000_cl_pass0_src2.csv
[Fri Jun 14 15:25:24 2013] fullrun_pn_xmm0677750101_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri Jun 14 15:25:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677750101_pi300-10000_cl_pass0_src2.csv
[Fri Jun 14 15:25:24 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0677750101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0677750101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 15:25:25 2013] fullrun_pn_xmm0677750101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri Jun 14 15:25:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677750101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Fri Jun 14 15:25:25 2013] fullrun_pn_xmm0677750101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Jun 14 15:25:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0677750101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Fri Jun 14 15:25:25 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0677750101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0677750101_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 20:03:39 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 18.049222 pixels away
[Fri Jun 14 20:03:40 2013] Spatial fit model total counts = 454.166000, observed total counts = 440.000000
[Fri Jun 14 20:03:40 2013] Offset between fit and detection position for source 2 = 7.526690 pixels
[Fri Jun 14 20:03:40 2013] Warning, changing simple spatial fit ID from 2 to 66
[Fri Jun 14 20:03:40 2013] 453.076023 total counts/ 453.076000 bgd. counts: snr = 0.000001
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 7.526690 pixels
  Position = (458.2, 150.2) = 23 46 40.75 -55 27 46.7
  Extent = 28.7 (28.7-57.4)", rotation angle = 0
  Source counts = 0.0 +/- 21.3
  Background counts = 453.1
  Rate = 2e-10 +/- 0.0002
  Deleting source due to low Poisson probability