[Fri Jun 14 13:20:25 2013] Detection parameters:
  Position = (460.4, 158.3) = 23 46 39.63 -55 27 18.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 312.5 +/- 21.6
  Background counts = 4.3
  Rate = 0.002 +/- 0.0002

[Fri Jun 14 13:20:28 2013] Off-axis axis estimate = 15.53'
[Fri Jun 14 17:54:35 2013] Using EEF radius (= 14.19 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 17:54:35 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 14 17:54:35 2013] Initial guess for spatial extent in simple fitting = 14.19"
[Fri Jun 14 17:54:35 2013] source mask rpix=3.3, npix_max = 56, mask sum = 32, frac = 0.565
[Fri Jun 14 17:54:35 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 14.19"
[Fri Jun 14 20:03:20 2013] fullrun_mos2_xmm0677750101_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jun 14 20:03:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0677750101_pi300-10000_cl_pass0_src1.csv
[Fri Jun 14 20:03:20 2013] fullrun_mos2_xmm0677750101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jun 14 20:03:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0677750101_pi300-10000_cl_pass0_src1.csv
[Fri Jun 14 20:03:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0677750101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0677750101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 20:03:21 2013] fullrun_mos2_xmm0677750101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jun 14 20:03:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0677750101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Jun 14 20:03:21 2013] fullrun_mos2_xmm0677750101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jun 14 20:03:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0677750101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Jun 14 20:03:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0677750101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0677750101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 20:03:59 2013] Spatial fit model total counts = 463.351000, observed total counts = 362.000000
[Fri Jun 14 20:03:59 2013] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 14 20:03:59 2013] Warning: source 51 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 13.156373 pixels away
[Fri Jun 14 20:04:00 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 20:04:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 20:04:00 2013] Assessing source extent using major
[Fri Jun 14 20:04:00 2013] Source does appear to be extended
[Fri Jun 14 20:04:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 20:04:00 2013] Source is confused with source 80
[Sat Jun 15 00:48:02 2013] Using EEF radius (= 14.19 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 00:48:02 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 15 00:48:02 2013] Initial guess for spatial extent in simple fitting = 14.19"
[Sat Jun 15 00:48:02 2013] source mask rpix=3.3, npix_max = 56, mask sum = 32, frac = 0.565
[Sat Jun 15 00:48:02 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 14.19"
[Sat Jun 15 03:30:30 2013] fullrun_mos2_xmm0677750101_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jun 15 03:30:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0677750101_pi300-10000_cl_pass1_src1.csv
[Sat Jun 15 03:30:30 2013] fullrun_mos2_xmm0677750101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jun 15 03:30:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0677750101_pi300-10000_cl_pass1_src1.csv
[Sat Jun 15 03:30:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0677750101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0677750101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 03:30:31 2013] fullrun_mos2_xmm0677750101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jun 15 03:30:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0677750101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat Jun 15 03:30:31 2013] fullrun_mos2_xmm0677750101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jun 15 03:30:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0677750101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat Jun 15 03:30:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0677750101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0677750101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 03:31:20 2013] Spatial fit model total counts = 463.351000, observed total counts = 362.000000
[Sat Jun 15 03:31:20 2013] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 15 03:31:20 2013] Warning: source 32 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 47.313933 pixels away
[Sat Jun 15 03:31:20 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 03:31:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 03:31:20 2013] Assessing source extent using major
[Sat Jun 15 03:31:20 2013] Source does appear to be extended
[Sat Jun 15 03:31:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 08:18:10 2013] XMMSAS src. selection expression = ellipse(40007.844696, 13724.832199, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 15 08:18:10 2013] Writing source region out to fullrun_mos2_xmm0677750101_pi300-10000_pass1_cl_src2_src.reg
[Sat Jun 15 08:18:10 2013] Extracting stamp from image fullrun_mos2_xmm0677750101_pi300-10000_cl_sm2.00.img.gz, (423, 121) - (498, 196)
[Sat Jun 15 08:18:10 2013] XMMSAS bgd. selection expression = annulus(40007.844696, 13724.832199, 1087.500000, 2175.000000, X, Y) && !ellipse(40647.358948, 13658.327698, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 15 08:18:10 2013] Writing fullrun_mos2_xmm0677750101_pi300-10000_pass1_cl_src2.gif
[Sat Jun 15 08:18:23 2013] Mean detx,y = (4077.58, -6162.64) 
[Sat Jun 15 08:18:24 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 08:18:41 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 08:18:42 2013] Setting source spectrum file to fullrun_mos2_xmm0677750101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Jun 15 08:18:42 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0677750101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Jun 15 08:46:34 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 15 08:46:34 2013] rmf not generated due to insufficient counts
[Sat Jun 15 09:18:11 2013] Updating aperture counts using extracted products
[Sat Jun 15 09:18:11 2013] Total counts from fullrun_mos2_xmm0677750101_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 262.00
[Sat Jun 15 09:18:11 2013] Total counts from fullrun_mos2_xmm0677750101_pi300-10000_pass1_cl_src2_bgd.pi.gz = 249.00
[Sat Jun 15 09:18:11 2013] Got source and background scale factors 1672.000000, 3344526.000000
[Sat Jun 15 09:18:11 2013] User source parameters:
  Position = (460.4, 158.3) = 23 46 39.63 -55 27 18.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 261.9 +/- 17.2
  Background aperture counts = 0.1
  Rate = 0.002 +/- 0.0001

[Sat Jun 15 09:18:11 2013] Updating counts from extracted products
[Sat Jun 15 09:18:11 2013] Set source signif. to 261.88/0.35 = 742.24
[Sat Jun 15 09:18:22 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 15 09:18:22 2013] Using photon index=1.80, rate=0.00213, arf fullrun_mos2_xmm0677750101_pi300-10000_pass1_cl_src2.arf
[Sat Jun 15 09:18:22 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 15 09:18:22 2013] Updating source flux to 1.3e-12
[Sat Jun 22 17:55:19 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jul  9 04:40:16 2013] xmm0677750101/analysis//spectral/fullrun_mos2_xmm0677750101_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete