[Fri Jun 14 13:19:38 2013] Detection parameters:
  Position = (126.2, 449.2) = 23 49 29.76 -55 6 3.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 69.6 +/- 10.5
  Background counts = 4.7
  Rate = 0.0005 +/- 8e-05

[Fri Jun 14 13:19:41 2013] Off-axis axis estimate = 16.60'
[Fri Jun 14 15:25:25 2013] Using EEF radius (= 14.73 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 15:25:25 2013] Initial guess for spatial extent in simple fitting = 14.73"
[Fri Jun 14 15:25:25 2013] source mask rpix=3.4, npix_max = 60, mask sum = 43, frac = 0.712
[Fri Jun 14 15:25:25 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 14.73"
[Fri Jun 14 17:54:33 2013] fullrun_mos1_xmm0677750101_pi300-10000_cl_pass0_src11.ximg exists
[Fri Jun 14 17:54:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0677750101_pi300-10000_cl_pass0_src11.csv
[Fri Jun 14 17:54:33 2013] fullrun_mos1_xmm0677750101_pi300-10000_cl_pass0_src11_1.ximg exists
[Fri Jun 14 17:54:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0677750101_pi300-10000_cl_pass0_src11.csv
[Fri Jun 14 17:54:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0677750101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0677750101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 17:54:34 2013] fullrun_mos1_xmm0677750101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Fri Jun 14 17:54:34 2013] fullrun_mos1_xmm0677750101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Fri Jun 14 17:54:34 2013] Fit fullrun_mos1_xmm0677750101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Fri Jun 14 20:03:49 2013] Spatial fit model total counts = 112.605000, observed total counts = 103.000000
[Fri Jun 14 20:03:49 2013] Offset between fit and detection position for source 9 = 0.778607 pixels
[Fri Jun 14 20:03:49 2013] 113.051600 total counts/ 59.596600 bgd. counts: snr = 6.924327
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.778607 pixels
  Position = (126.9, 449.6) = 23 49 29.40 -55 6 4.2
  Extent = 7.0 (5.2-9.2)", rotation angle = 0
  Source counts = 53.5 +/- 10.6
  Background counts = 59.6
  Rate = 0.0004 +/- 9e-05
[Fri Jun 14 20:03:49 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 20:03:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 20:03:49 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 20:03:49 2013] Source does appear to be extended
[Fri Jun 14 20:03:49 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 21:59:42 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 14 21:59:42 2013] Initial guess for spatial extent in simple fitting = 6.99"
[Fri Jun 14 21:59:42 2013] source mask rpix=1.6, npix_max = 17, mask sum = 17, frac = 0.958
[Fri Jun 14 21:59:42 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 6.99"
[Sat Jun 15 00:48:01 2013] fullrun_mos1_xmm0677750101_pi300-10000_cl_pass1_src10.ximg exists
[Sat Jun 15 00:48:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0677750101_pi300-10000_cl_pass1_src10.csv
[Sat Jun 15 00:48:01 2013] fullrun_mos1_xmm0677750101_pi300-10000_cl_pass1_src10_1.ximg exists
[Sat Jun 15 00:48:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0677750101_pi300-10000_cl_pass1_src10.csv
[Sat Jun 15 00:48:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0677750101_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0677750101_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 00:48:02 2013] fullrun_mos1_xmm0677750101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Sat Jun 15 00:48:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0677750101_pi300-10000_cl_pass1_tfrozen_src10.csv
[Sat Jun 15 00:48:02 2013] fullrun_mos1_xmm0677750101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Sat Jun 15 00:48:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0677750101_pi300-10000_cl_pass1_tfrozen_src10.csv
[Sat Jun 15 00:48:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0677750101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0677750101_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 03:31:10 2013] Warning, spatial fit 10 centroid is now closest to src. 48
[Sat Jun 15 03:31:11 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 03:31:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 03:31:11 2013] Assessing source extent using major axis lower bound
[Sat Jun 15 03:31:11 2013] Source does appear to be extended
[Sat Jun 15 03:31:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 07:27:36 2013] XMMSAS src. selection expression = ellipse(10994.215200, 39064.914400, 419.338212, 419.338212, 0.000000, X, Y)
[Sat Jun 15 07:27:36 2013] Writing source region out to fullrun_mos1_xmm0677750101_pi300-10000_pass1_cl_src9_src.reg
[Sat Jun 15 07:27:36 2013] Extracting stamp from image fullrun_mos1_xmm0677750101_pi300-10000_cl_sm2.00.img.gz, (103, 425) - (151, 474)
[Sat Jun 15 07:27:36 2013] XMMSAS bgd. selection expression = annulus(10994.215200, 39064.914400, 698.897020, 1397.794040, X, Y) && !ellipse(11597.954980, 37750.934800, 502.616814, 502.616814, 0.000000, X, Y)
[Sat Jun 15 07:27:36 2013] Writing fullrun_mos1_xmm0677750101_pi300-10000_pass1_cl_src9.gif
[Sat Jun 15 07:34:06 2013] Mean detx,y = (693.94, 7938.87) 
[Sat Jun 15 07:34:07 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 07:34:15 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 07:34:15 2013] Setting source spectrum file to fullrun_mos1_xmm0677750101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sat Jun 15 07:34:15 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0677750101_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Sat Jun 15 08:10:35 2013] Not generating rmf since there are only 53 counts
[Sat Jun 15 08:10:35 2013] rmf not generated due to insufficient counts
[Sat Jun 15 09:17:58 2013] Updating aperture counts using extracted products
[Sat Jun 15 09:17:58 2013] Total counts from fullrun_mos1_xmm0677750101_pi300-10000_pass1_cl_src9_src_b10.pi.gz = 62.00
[Sat Jun 15 09:17:58 2013] Total counts from fullrun_mos1_xmm0677750101_pi300-10000_pass1_cl_src9_bgd.pi.gz = 95.00
[Sat Jun 15 09:17:58 2013] Got source and background scale factors 813.000000, 1405.000000
[Sat Jun 15 09:17:58 2013] User source parameters:
  Position = (126.9, 449.6) = 23 49 29.40 -55 6 4.2
  Extent = 7.0 (5.2-9.2)", rotation angle = 0
  Source aperture counts = 7.0 +/- 8.9
  Background aperture counts = 55.0
  Rate = 6e-05 +/- 7e-05

[Sat Jun 15 09:18:10 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 15 09:18:10 2013] Using photon index=1.80, rate=0.000437, arf fullrun_mos1_xmm0677750101_pi300-10000_pass1_cl_src9.arf
[Sat Jun 15 09:18:10 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 15 09:18:10 2013] Getting flux using calc_pl_flux failed
[Sat Jun 15 09:18:27 2013] Source 9 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jun 22 17:53:20 2013] xmm0677750101/analysis//spectral/fullrun_mos1_xmm0677750101_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete