[Thu May 16 21:05:51 2013] Detection parameters:
  Position = (147.1, 337.3) = 23 48 50.47 -54 5 9.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 149.0 +/- 14.1
  Background counts = 4.3
  Rate = 0.001 +/- 0.0001

[Thu May 16 21:05:53 2013] Off-axis axis estimate = 11.33'
[Fri May 17 04:11:39 2013] Using EEF radius (= 12.09 ")to estimate initial spatial extent for simple fitting
[Fri May 17 04:11:39 2013] Initial guess for spatial extent in simple fitting = 12.09"
[Fri May 17 04:11:39 2013] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.976
[Fri May 17 04:11:39 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 12.09"
[Fri May 17 05:54:38 2013] fullrun_mos2_xmm0677740101_pi300-10000_cl_pass0_src4.ximg exists
[Fri May 17 05:54:38 2013] fullrun_mos2_xmm0677740101_pi300-10000_cl_pass0_src4_1.ximg exists
[Fri May 17 05:54:38 2013] Fit fullrun_mos2_xmm0677740101_pi300-10000_cl_pass0_src4 appears to have run properly
[Fri May 17 05:54:38 2013] fullrun_mos2_xmm0677740101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Fri May 17 05:54:38 2013] fullrun_mos2_xmm0677740101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Fri May 17 05:54:38 2013] Fit fullrun_mos2_xmm0677740101_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Fri May 17 05:55:19 2013] Spatial fit model total counts = 164.485000, observed total counts = 161.000000
[Fri May 17 05:55:19 2013] Offset between fit and detection position for source 12 = 0.244707 pixels
[Fri May 17 05:55:19 2013] 164.896800 total counts/ 46.754800 bgd. counts: snr = 17.277910
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.244707 pixels
  Position = (147.0, 337.5) = 23 48 50.52 -54 5 9.2
  Extent = 6.9 (5.8-8.4)" x 3.9 (3.3-4.5)", rotation angle = 47 (36-61) degrees
  Source counts = 118.1 +/- 12.8
  Background counts = 46.8
  Rate = 0.001 +/- 0.0001
[Fri May 17 05:55:19 2013] Vigneting correction estimate = 1.000000
[Fri May 17 05:55:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 05:55:19 2013] Assessing source extent using major axis lower bound
[Fri May 17 05:55:19 2013] Source does appear to be extended
[Fri May 17 05:55:19 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.29
[Fri May 17 12:49:33 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 17 12:49:33 2013] Initial guess for spatial extent in simple fitting = 5.40"
[Fri May 17 12:49:33 2013] source mask rpix=1.2, npix_max = 12, mask sum = 12, frac = 0.989
[Fri May 17 12:49:33 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 5.40"
[Fri May 17 14:01:19 2013] fullrun_mos2_xmm0677740101_pi300-10000_cl_pass1_src4.ximg exists
[Fri May 17 14:01:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0677740101_pi300-10000_cl_pass1_src4.csv
[Fri May 17 14:01:19 2013] fullrun_mos2_xmm0677740101_pi300-10000_cl_pass1_src4_1.ximg exists
[Fri May 17 14:01:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0677740101_pi300-10000_cl_pass1_src4.csv
[Fri May 17 14:01:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0677740101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0677740101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 14:01:20 2013] fullrun_mos2_xmm0677740101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Fri May 17 14:01:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0677740101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Fri May 17 14:01:20 2013] fullrun_mos2_xmm0677740101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Fri May 17 14:01:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0677740101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Fri May 17 14:01:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0677740101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0677740101_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 14:01:57 2013] Warning, spatial fit 4 centroid is now closest to src. 10
[Fri May 17 14:01:57 2013] Vigneting correction estimate = 1.000000
[Fri May 17 14:01:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 14:01:57 2013] Assessing source extent using major axis lower bound
[Fri May 17 14:01:57 2013] Source does appear to be extended
[Fri May 17 14:01:57 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.29
[Fri May 17 19:55:07 2013] XMMSAS src. selection expression = ellipse(12742.863000, 29313.990119, 415.633812, 232.383007, 46.669748, X, Y)
[Fri May 17 19:55:07 2013] Writing source region out to fullrun_mos2_xmm0677740101_pi300-10000_pass1_cl_src12_src.reg
[Fri May 17 19:55:07 2013] Extracting stamp from image fullrun_mos2_xmm0677740101_pi300-10000_cl_sm2.00.img.gz, (123, 314) - (171, 361)
[Fri May 17 19:55:07 2013] XMMSAS bgd. selection expression = annulus(12742.863000, 29313.990119, 692.723020, 1385.446040, X, Y)
[Fri May 17 19:55:07 2013] Writing fullrun_mos2_xmm0677740101_pi300-10000_pass1_cl_src12.gif
[Fri May 17 19:56:22 2013] Mean detx,y = (-4264.33, 5907.86) 
[Fri May 17 19:56:24 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 17 19:56:35 2013] Binned source spectrum to 10 counts/bin
[Fri May 17 19:56:35 2013] Setting source spectrum file to fullrun_mos2_xmm0677740101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Fri May 17 19:56:35 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0677740101_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Fri May 17 20:37:41 2013] Updating aperture counts using extracted products
[Fri May 17 20:37:41 2013] Total counts from fullrun_mos2_xmm0677740101_pi300-10000_pass1_cl_src12_src_b10.pi.gz = 113.00
[Fri May 17 20:37:41 2013] Total counts from fullrun_mos2_xmm0677740101_pi300-10000_pass1_cl_src12_bgd.pi.gz = 92.00
[Fri May 17 20:37:41 2013] Got source and background scale factors 297600.000000, 3998836.000000
[Fri May 17 20:37:41 2013] User source parameters:
  Position = (147.0, 337.5) = 23 48 50.52 -54 5 9.2
  Extent = 6.9 (5.8-8.4)" x 3.9 (3.3-4.5)", rotation angle = 47 (36-61) degrees
  Source aperture counts = 106.2 +/- 11.7
  Background aperture counts = 6.8
  Rate = 0.0009 +/- 0.0001

[Fri May 17 20:37:52 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 17 20:37:52 2013] Using photon index=1.80, rate=0.000977, arf fullrun_mos2_xmm0677740101_pi300-10000_pass1_cl_src12.arf
[Fri May 17 20:37:52 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 17 20:37:52 2013] Updating source flux to 4.1e-14
[Sat May 25 00:28:08 2013] xmm0677740101/analysis//spectral/fullrun_mos2_xmm0677740101_pi300-10000_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete