[Sun Mar  4 14:21:11 2012] Detection parameters:
  Position = (313.2, 168.7) = 23 33 8.75 -52 39 5.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 24.8 +/- 6.3
  Background counts = 3.3
  Rate = 0.0002 +/- 5e-05

[Sun Mar  4 14:21:12 2012] Off-axis axis estimate = 9.47'
[Sun Mar  4 15:46:10 2012] Using EEF radius (= 11.16 ")to estimate initial spatial extent for simple fitting
[Sun Mar  4 15:46:10 2012] Initial guess for spatial extent in simple fitting = 11.16"
[Sun Mar  4 15:46:10 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.957
[Sun Mar  4 15:46:10 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 11.16"
[Sun Mar  4 16:27:52 2012] fullrun_mos2_xmm0677720101_pi300-10000_cl_pass0_src27.ximg exists
[Sun Mar  4 16:27:52 2012] fullrun_mos2_xmm0677720101_pi300-10000_cl_pass0_src27_1.ximg exists
[Sun Mar  4 16:27:52 2012] Fit fullrun_mos2_xmm0677720101_pi300-10000_cl_pass0_src27 appears to have run properly
[Sun Mar  4 16:27:52 2012] fullrun_mos2_xmm0677720101_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Sun Mar  4 16:27:52 2012] fullrun_mos2_xmm0677720101_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Sun Mar  4 16:27:52 2012] Fit fullrun_mos2_xmm0677720101_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Sun Mar  4 16:28:07 2012] Spatial fit model total counts = 56.570000, observed total counts = 55.000000
[Sun Mar  4 16:28:07 2012] Offset between fit and detection position for source 3 = 0.237116 pixels
[Sun Mar  4 16:28:07 2012] 57.986100 total counts/ 38.502400 bgd. counts: snr = 3.139985
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.237116 pixels
  Position = (312.9, 168.7) = 23 33 8.86 -52 39 5.4
  Extent = 6.4 (4.0-9.0)", rotation angle = 0
  Source counts = 19.5 +/- 7.6
  Background counts = 38.5
  Rate = 0.0002 +/- 7e-05
[Sun Mar  4 16:28:07 2012] Vigneting correction estimate = 1.000000
[Sun Mar  4 16:28:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar  4 16:28:07 2012] Assessing source extent using major axis lower bound
[Sun Mar  4 16:28:07 2012] Source does appear to be extended
[Sun Mar  4 16:28:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar  4 17:27:28 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Mar  4 17:27:28 2012] Initial guess for spatial extent in simple fitting = 6.36"
[Sun Mar  4 17:27:28 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.039
[Sun Mar  4 17:27:28 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 6.36"
[Sun Mar  4 17:58:20 2012] fullrun_mos2_xmm0677720101_pi300-10000_cl_pass1_src25.ximg exists
[Sun Mar  4 17:58:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0677720101_pi300-10000_cl_pass1_src25.csv
[Sun Mar  4 17:58:20 2012] fullrun_mos2_xmm0677720101_pi300-10000_cl_pass1_src25_1.ximg exists
[Sun Mar  4 17:58:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0677720101_pi300-10000_cl_pass1_src25.csv
[Sun Mar  4 17:58:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0677720101_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0677720101_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar  4 17:58:20 2012] fullrun_mos2_xmm0677720101_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Sun Mar  4 17:58:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0677720101_pi300-10000_cl_pass1_tfrozen_src25.csv
[Sun Mar  4 17:58:20 2012] fullrun_mos2_xmm0677720101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Sun Mar  4 17:58:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0677720101_pi300-10000_cl_pass1_tfrozen_src25.csv
[Sun Mar  4 17:58:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0677720101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0677720101_pi300-10000_cl_pass1_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar  4 17:58:32 2012] Spatial fit model total counts = 62.000600, observed total counts = 53.000000
[Sun Mar  4 17:58:32 2012] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Mar  4 17:58:32 2012] Vigneting correction estimate = 1.000000
[Sun Mar  4 17:58:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar  4 17:58:32 2012] Assessing source extent using major axis lower bound
[Sun Mar  4 17:58:32 2012] Source does appear to be extended
[Sun Mar  4 17:58:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar  4 19:03:39 2012] XMMSAS src. selection expression = ellipse(27177.389820, 14630.258400, 381.597011, 381.597011, 0.000000, X, Y)
[Sun Mar  4 19:03:39 2012] Writing source region out to fullrun_mos2_xmm0677720101_pi300-10000_pass1_cl_src3_src.reg
[Sun Mar  4 19:03:39 2012] Extracting stamp from image fullrun_mos2_xmm0677720101_pi300-10000_cl_sm2.00.img.gz, (291, 147) - (335, 191)
[Sun Mar  4 19:03:39 2012] XMMSAS bgd. selection expression = annulus(27177.389820, 14630.258400, 635.995018, 1271.990037, X, Y)
[Sun Mar  4 19:03:39 2012] Writing fullrun_mos2_xmm0677720101_pi300-10000_pass1_cl_src3.gif
[Sun Mar  4 19:11:51 2012] Mean detx,y = (11296.78, 10960.85) 
[Sun Mar  4 19:11:53 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar  4 19:12:04 2012] Binned source spectrum to 10 counts/bin
[Sun Mar  4 19:12:04 2012] Setting source spectrum file to fullrun_mos2_xmm0677720101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Mar  4 19:12:04 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0677720101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun Mar  4 19:14:53 2012] Not generating rmf since there are only 19 counts
[Sun Mar  4 19:14:53 2012] rmf not generated due to insufficient counts
[Sun Mar  4 19:18:01 2012] Updating aperture counts using extracted products
[Sun Mar  4 19:18:01 2012] Error reading totcts from fullrun_mos2_xmm0677720101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Mar  4 19:18:02 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar  4 19:18:02 2012] Using photon index=1.80, rate=0.000177, arf fullrun_mos2_xmm0677720101_pi300-10000_pass1_cl_src3.arf
[Sun Mar  4 19:18:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar  4 19:18:02 2012] Updating source flux to 5.2e-15
[Sun Mar  4 19:18:04 2012] Flag p found in src. 3 procflags, skipping spectral fitting
[Sun Mar  4 19:18:04 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Mar  4 19:18:05 2012] xmm0677720101/analysis//spectral/fullrun_mos2_xmm0677720101_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete